- MSNDCLAS_HAVE_BOOT are MSNDPIN_HAVE_BOOT questions that should be
asked, not variables that get set automatically
- s|Documentation/sound|Documentation/sound/oss|g
Please apply
Adrian
--- l/sound/oss/Kconfig.old 2002-11-20 17:56:08.000000000 +0100
+++ l/sound/oss/Kconfig 2002-11-20 17:59:31.000000000 +0100
@@ -156,7 +156,7 @@
1274:5000. Since Ensoniq was bought by Creative Labs,
Sound Blaster 64/PCI models are either ES1370 or ES1371 based.
This driver differs slightly from OSS/Free, so PLEASE READ
- <file:Documentation/sound/es1370>.
+ <file:Documentation/sound/oss/es1370>.
config SOUND_ES1371
tristate "Creative Ensoniq AudioPCI 97 (ES1371)"
@@ -180,7 +180,7 @@
Solo1 chip without removing your computer's cover, use
lspci -n and look for the PCI ID 125D:1969. This driver
differs slightly from OSS/Free, so PLEASE READ
- <file:Documentation/sound/solo1>.
+ <file:Documentation/sound/oss/solo1>.
config SOUND_MAESTRO
tristate "ESS Maestro, Maestro2, Maestro2E driver"
@@ -188,7 +188,7 @@
help
Say Y or M if you have a sound system driven by ESS's Maestro line
of PCI sound chips. These include the Maestro 1, Maestro 2, and
- Maestro 2E. See <file:Documentation/sound/Maestro> for more
+ Maestro 2E. See <file:Documentation/sound/oss/Maestro> for more
details.
config SOUND_MAESTRO3
@@ -221,7 +221,7 @@
SonicVibes chip without removing your computer's cover, use
lspci -n and look for the PCI ID 5333:CA00. This driver
differs slightly from OSS/Free, so PLEASE READ
- <file:Documentation/sound/sonicvibes>.
+ <file:Documentation/sound/oss/sonicvibes>.
config SOUND_VWSND
tristate "SGI Visual Workstation Sound"
@@ -229,7 +229,7 @@
help
Say Y or M if you have an SGI Visual Workstation and you want to be
able to use its on-board audio. Read
- <file:Documentation/sound/vwsnd> for more info on this driver's
+ <file:Documentation/sound/oss/vwsnd> for more info on this driver's
capabilities.
config SOUND_VRC5477
@@ -284,7 +284,7 @@
Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or
Monterey (not for the Pinnacle or Fiji).
- See <file:Documentation/sound/MultiSound> for important information
+ See <file:Documentation/sound/oss/MultiSound> for important information
about this driver. Note that it has been discontinued, but the
Voyetra Turtle Beach knowledge base entry for it is still available
at <http://www.voyetra-turtle-beach.com/site/kb_ftp/790.asp>.
@@ -293,7 +293,7 @@
depends on SOUND_PRIME && SOUND_MSNDCLAS=y
config MSNDCLAS_HAVE_BOOT
- bool
+ bool "Have MSNDINIT.BIN firmware file"
depends on SOUND_MSNDCLAS=y
default y
@@ -305,7 +305,7 @@
The MultiSound cards have two firmware files which are required for
operation, and are not currently included. These files can be
obtained from Turtle Beach. See
- <file:Documentation/sound/MultiSound> for information on how to
+ <file:Documentation/sound/oss/MultiSound> for information on how to
obtain this.
config MSNDCLAS_PERM_FILE
@@ -316,7 +316,7 @@
The MultiSound cards have two firmware files which are required for
operation, and are not currently included. These files can be
obtained from Turtle Beach. See
- <file:Documentation/sound/MultiSound> for information on how to
+ <file:Documentation/sound/oss/MultiSound> for information on how to
obtain this.
config MSNDCLAS_IRQ
@@ -346,7 +346,7 @@
depends on SOUND_PRIME!=n && SOUND
help
Say M here if you have a Turtle Beach MultiSound Pinnacle or Fiji.
- See <file:Documentation/sound/MultiSound> for important information
+ See <file:Documentation/sound/oss/MultiSound> for important information
about this driver. Note that it has been discontinued, but the
Voyetra Turtle Beach knowledge base entry for it is still available
at <http://www.voyetra-turtle-beach.com/site/kb_ftp/600.asp>.
@@ -355,7 +355,7 @@
depends on SOUND_PRIME && SOUND_MSNDPIN=y
config MSNDPIN_HAVE_BOOT
- bool
+ bool "Have PNDSPINI.BIN firmware file"
depends on SOUND_MSNDPIN=y
default y
@@ -367,7 +367,7 @@
The MultiSound cards have two firmware files which are required
for operation, and are not currently included. These files can be
obtained from Turtle Beach. See
- <file:Documentation/sound/MultiSound> for information on how to
+ <file:Documentation/sound/oss/MultiSound> for information on how to
obtain this.
config MSNDPIN_PERM_FILE
@@ -378,7 +378,7 @@
The MultiSound cards have two firmware files which are required for
operation, and are not currently included. These files can be
obtained from Turtle Beach. See
- <file:Documentation/sound/MultiSound> for information on how to
+ <file:Documentation/sound/oss/MultiSound> for information on how to
obtain this.
config MSNDPIN_IRQ
@@ -412,7 +412,7 @@
If you have the S/PDIF daughter board for the Pinnacle or Fiji,
answer Y here; otherwise, say N. If you have this, you will be able
to play and record from the S/PDIF port (digital signal). See
- <file:Documentation/sound/MultiSound> for information on how to make
+ <file:Documentation/sound/oss/MultiSound> for information on how to make
use of this capability.
config MSNDPIN_NONPNP
@@ -613,7 +613,7 @@
"cs4232=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
command line.
- See <file:Documentation/sound/CS4232> for more information on
+ See <file:Documentation/sound/oss/CS4232> for more information on
configuring this card.
config SOUND_SSCAPE
@@ -633,7 +633,7 @@
depends on SOUND_OSS
help
Say Y here for any type of Gravis Ultrasound card, including the GUS
- or GUS MAX. See also <file:Documentation/sound/ultrasound> for more
+ or GUS MAX. See also <file:Documentation/sound/oss/ultrasound> for more
information on configuring this card with modules.
If you compile the driver into the kernel, you have to add
@@ -706,7 +706,7 @@
synthesizers (OPL2, OPL3 and OPL4), 6850 UART MIDI Interface.
For cards having native support in VoxWare, consult the card
- specific instructions in <file:Documentation/sound/README.OSS>.
+ specific instructions in <file:Documentation/sound/oss/README.OSS>.
Some drivers have their own MSS support and saying Y to this option
will cause a conflict.
@@ -724,7 +724,7 @@
will cause a conflict. Also, enabling MPU401 on a system that
doesn't really have a MPU401 could cause some trouble. If your card
was in the list of supported cards, look at the card specific
- instructions in the <file:Documentation/sound/README.OSS> file. It
+ instructions in the <file:Documentation/sound/oss/README.OSS> file. It
is safe to answer Y if you have a true MPU401 MIDI interface card.
If you compile the driver into the kernel, you have to add
@@ -740,7 +740,7 @@
laptops. It includes support for an AC97-compatible mixer and an
apparently proprietary sound engine.
- See <file:Documentation/sound/NM256> for further information.
+ See <file:Documentation/sound/oss/NM256> for further information.
config SOUND_MAD16
tristate "OPTi MAD16 and/or Mozart based cards"
@@ -759,8 +759,8 @@
"mad16=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the
kernel command line.
- See also <file:Documentation/sound/Opti> and
- <file:Documentation/sound/MAD16> for more information on setting
+ See also <file:Documentation/sound/oss/Opti> and
+ <file:Documentation/sound/oss/MAD16> for more information on setting
these cards up as modules.
config MAD16_OLDCARD
@@ -778,7 +778,7 @@
Answer Y only if you have a Pro Audio Spectrum 16, ProAudio Studio
16 or Logitech SoundMan 16 sound card. Answer N if you have some
other card made by Media Vision or Logitech since those are not
- PAS16 compatible. Please read <file:Documentation/sound/PAS16>.
+ PAS16 compatible. Please read <file:Documentation/sound/oss/PAS16>.
It is not necessary to add Sound Blaster support separately; it
is included in PAS support.
@@ -801,7 +801,7 @@
ADSP-16 or some other card based on the PSS chipset (AD1848 codec +
ADSP-2115 DSP chip + Echo ESC614 ASIC CHIP). For more information on
how to compile it into the kernel or as a module see the file
- <file:Documentation/sound/PSS>.
+ <file:Documentation/sound/oss/PSS>.
If you compile the driver into the kernel, you have to add
"pss=<io>,<mssio>,<mssirq>,<mssdma>,<mpuio>,<mpuirq>" to the kernel
@@ -818,7 +818,7 @@
If you said M to "PSS support" above, you may enable or disable this
PSS mixer with the module parameter pss_mixer. For more information
- see the file <file:Documentation/sound/PSS>.
+ see the file <file:Documentation/sound/oss/PSS>.
config PSS_HAVE_BOOT
bool "Have DSPxxx.LD firmware file"
@@ -845,16 +845,16 @@
SM Games). For an unknown card you may answer Y if the card claims
to be Sound Blaster-compatible.
- Please read the file <file:Documentation/sound/Soundblaster>.
+ Please read the file <file:Documentation/sound/oss/Soundblaster>.
You should also say Y here for cards based on the Avance Logic
- ALS-007 and ALS-1X0 chips (read <file:Documentation/sound/ALS>) and
+ ALS-007 and ALS-1X0 chips (read <file:Documentation/sound/oss/ALS>) and
for cards based on ESS chips (read
- <file:Documentation/sound/ESS1868> and
- <file:Documentation/sound/ESS>). If you have an SB AWE 32 or SB AWE
+ <file:Documentation/sound/oss/ESS1868> and
+ <file:Documentation/sound/oss/ESS>). If you have an SB AWE 32 or SB AWE
64, say Y here and also to "AWE32 synth" below and read
- <file:Documentation/sound/INSTALL.awe>. If you have an IBM Mwave
- card, say Y here and read <file:Documentation/sound/mwave>.
+ <file:Documentation/sound/oss/INSTALL.awe>. If you have an IBM Mwave
+ card, say Y here and read <file:Documentation/sound/oss/mwave>.
If you compile the driver into the kernel and don't want to use
isapnp, you have to add "sb=<io>,<irq>,<dma>,<dma2>" to the kernel
@@ -868,8 +868,8 @@
depends on SOUND_OSS
help
Say Y here if you have a Sound Blaster SB32, AWE32-PnP, SB AWE64 or
- similar sound card. See <file:Documentation/sound/README.awe>,
- <file:Documentation/sound/AWE32> and the Soundblaster-AWE
+ similar sound card. See <file:Documentation/sound/oss/README.awe>,
+ <file:Documentation/sound/oss/AWE32> and the Soundblaster-AWE
mini-HOWTO, available from <http://www.linuxdoc.org/docs.html#howto>
for more info.
@@ -878,8 +878,8 @@
depends on SOUND_OSS && m
help
Answer Y or M if you have a Tropez Plus, Tropez or Maui sound card
- and read the files <file:Documentation/sound/Wavefront> and
- <file:Documentation/sound/Tropez+>.
+ and read the files <file:Documentation/sound/oss/Wavefront> and
+ <file:Documentation/sound/oss/Tropez+>.
config SOUND_MAUI
tristate "Limited support for Turtle Beach Wave Front (Maui, Tropez) synthesizers"
@@ -916,7 +916,7 @@
cards may have software (TSR) FM emulation. Enabling FM support with
these cards may cause trouble (I don't currently know of any such
cards, however). Please read the file
- <file:Documentation/sound/OPL3> if your card has an OPL3 chip.
+ <file:Documentation/sound/oss/OPL3> if your card has an OPL3 chip.
If you compile the driver into the kernel, you have to add
"opl3=<io>" to the kernel command line.
@@ -929,7 +929,7 @@
help
Say Y or M if you have a Yamaha OPL3-SA1 sound chip, which is
usually built into motherboards. Read
- <file:Documentation/sound/OPL3-SA> for details.
+ <file:Documentation/sound/oss/OPL3-SA> for details.
If you compile the driver into the kernel, you have to add
"opl3sa=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
@@ -941,7 +941,7 @@
help
Say Y or M if you have a card based on one of these Yamaha sound
chipsets or the "SAx", which is actually a SA3. Read
- <file:Documentation/sound/OPL3-SA2> for more information on
+ <file:Documentation/sound/oss/OPL3-SA2> for more information on
configuring these cards.
If you compile the driver into the kernel and do not also
@@ -989,9 +989,9 @@
accordingly. You should say Y to one and only one of these two
questions.
- Read the <file:Documentation/sound/README.OSS> file and the head of
+ Read the <file:Documentation/sound/oss/README.OSS> file and the head of
<file:drivers/sound/aedsp16.c> as well as
- <file:Documentation/sound/AudioExcelDSP16> to get more information
+ <file:Documentation/sound/oss/AudioExcelDSP16> to get more information
about this driver and its configuration.
config SC6600
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/