[1.] One line summary of the problem:
running the make modules_install script for the 2.5.48 release doesn't
properly populate the 2.5.48 module directory
[2.] Full description of the problem/report:
2.4.19, 2.5.45, and 2.5.47 all build and install ok on my system, yet
2.5.48's make modules_install doesn't build
modules.dep or create the /lib/modules/2.5.48/ properly, leaving out every
entry in the /lib/modules/2.5.48/ directory
and only creating the kernel/ and build/ directory under it. listings below
[3.] Keywords (i.e., modules, networking, kernel):
modules, make, 2.5.48
[4.] Kernel version (from /proc/version):
current: 2.4.19 and 2.5.47, building 2.5.48
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
[6.] A small shell script or example program which triggers the
problem (if possible)
make modules ; make modules_install
[7.] Environment
a debian based distribution using gcc 2.95.4, also tried on slackware boxes
using gcc 2.95.2, 2.95.3, and 3.1 with same result
[7.1.] Software (add the output of the ver_linux script here)
Linux beer 2.5.47 #1 Thu Nov 21 03:48:50 CET 2002 i586 unknown unknown
GNU/Linux
Gnu C 2.95.4
Gnu make 3.79.1
util-linux 2.11n
mount 2.11n
modutils 2.4.15
e2fsprogs 1.27
reiserfsprogs 3.6.2
xfsprogs 2.1.2
pcmcia-cs 3.2.1
PPP 2.4.1
isdn4k-utils 3.1pre4
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 2.0.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 2.0.12
Modules Loaded ppp_async bsd_comp ppp_deflate zlib_inflate
zlib_deflate ppp_generic slhc
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : AuthenticAMD
cpu family : 5
model : 8
model name : AMD-K6(tm) 3D processor
stepping : 12
cpu MHz : 333.346
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 pge mmx syscall 3dnow
k6_mtrr
bogomips : 659.45
[7.3.] Module information (from /proc/modules):
ppp_async 6432 1
bsd_comp 3904 0
ppp_deflate 2816 0
zlib_inflate 18432 0 [ppp_deflate]
zlib_deflate 17632 0 [ppp_deflate]
ppp_generic 16652 3 [ppp_async bsd_comp ppp_deflate]
slhc 4640 0 [ppp_generic]
while using 2.5.47
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial
0378-037a : parport0
037b-037f : parport0
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial
0cf8-0cff : PCI conf1
e000-e0ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
e000-e0ff : 8139too
f000-f00f : ALi Corporation M5229 IDE
f000-f007 : ide0
f008-f00f : ide1
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-03feffff : System RAM
00100000-0034aaf8 : Kernel code
0034aaf9-0043e13f : Kernel data
03ff0000-03ff2fff : ACPI Non-volatile Storage
03ff3000-03ffffff : ACPI Tables
d8000000-dfffffff : PCI Bus #01
d8000000-dfffffff : S3 Inc. Savage 4
d8000000-d87fffff : vesafb
e0000000-e3ffffff : ALi Corporation M1541
e4000000-e5ffffff : PCI Bus #01
e5000000-e507ffff : S3 Inc. Savage 4
e6000000-e6007fff : Yamaha Corporation YMF-724F [DS-1 Audio Controller]
e6000000-e6007fff : YMFPCI
e6008000-e60080ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
e6008000-e60080ff : 8139too
e6009000-e6009fff : ALi Corporation USB 1.1 Controller
e6009000-e6009fff : ohci-hcd
ffff0000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Acer Laboratories Inc. [ALi] M1541 (rev 04)
Subsystem: Acer Laboratories Inc. [ALi] ALI M1541 Aladdin V/V+ AGP
System Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [b0] AGP version 1.0
Status: RQ=27 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Acer Laboratories Inc. [ALi] M5243 (rev 04) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: e4000000-e5ffffff
Prefetchable memory behind bridge: d8000000-dfffffff
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:02.0 USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 03)
(prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e6009000 (32-bit, non-prefetchable) [size=4K]
00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge
[Aladdin IV] (rev c3)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort+ <MAbort+ >SERR- <PERR-
Latency: 0
00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev
10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at e000 [size=256]
Region 1: Memory at e6008000 (32-bit, non-prefetchable) [size=256]
00:0f.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c1)
(prog-if fa)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 255
Region 4: I/O ports at f000 [size=16]
00:10.0 Multimedia audio controller: Yamaha Corporation YMF-724F [DS-1 Audio
Controller] (rev 03)
Subsystem: Yamaha Corporation DS-XG PCI Audio CODEC
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
Latency: 32 (1250ns min, 6250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e6000000 (32-bit, non-prefetchable) [size=32K]
Capabilities: [50] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: S3 Inc. Savage 4 (rev 02) (prog-if 00
[VGA]
Subsystem: S3 Inc. 86C394-397 Savage4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 248 (1000ns min, 63750ns max), cache line size 08
Interrupt: pin A routed to IRQ 5
Region 0: Memory at e5000000 (32-bit, non-prefetchable) [size=512K]
Region 1: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] AGP version 2.0
Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
[7.6.] SCSI information (from /proc/scsi/scsi)
Attached devices:
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: Generic Model: USB Storage-SMC Rev: 0090
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 01
Vendor: Generic Model: USB Storage-CFC Rev: 0090
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 02
Vendor: Generic Model: USB Storage-MMC Rev: 0090
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 03
Vendor: Generic Model: USB Storage-MSC Rev: 0090
Type: Direct-Access ANSI SCSI revision: 02
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
listing of /lib/modules/2.5.47/ after a build, correctly populated
root@beer:/lib/modules# ls 2.5.47/
build modules.generic_string modules.parportmap modules.usbmap
kernel modules.ieee1394map modules.pcimap
modules.dep modules.isapnpmap modules.pnpbiosmap
listing of /lib/modules/2.5.48/ after a build, incompletely populated
root@beer:/lib/modules# ls 2.5.48/
build kernel
listing of /lib/modules/2.5.47/kernel/
root@beer:/lib/modules# ls 2.5.47/kernel/
drivers lib
(and appropriate modules under drivers/)
listing of /lib/modules/2.5.48/kernel/
root@beer:/lib/modules# ls 2.5.48/kernel/
8139too.o dummy.o ne.o pppox.o zlib_deflate.o
8390.o ipaq.o ppp_async.o sha1.o zlib_inflate.o
blowfish.o loop.o ppp_deflate.o sha256.o
bsd_comp.o md4.o ppp_generic.o slhc.o
crc32.o md5.o ppp_synctty.o tcrypt.o
des.o mii.o pppoe.o usbserial.o
(This just doesn't look right at all)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/