Hi,
Attached is a chipset driver for the Compaq Triflex IDE device
(PCI device ID 0xae33). Enables Busmaster DMA on both devices.
Known to work with the Compaq Workstation 5x00 series.
Let me know of any problems.
Thanks,
Torben Mathiasen
--Nq2Wo0NMKNjxTN9z
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="triflex-ide-2550ac1.diff"
diff -urN -X exclude linux-2.5.50-ac1-clean/drivers/ide/Kconfig linux-2.5.50/drivers/ide/Kconfig
--- linux-2.5.50-ac1-clean/drivers/ide/Kconfig 2002-11-27 22:35:59.000000000 +0000
+++ linux-2.5.50/drivers/ide/Kconfig 2002-12-10 16:19:32.000000000 +0000
@@ -658,6 +658,12 @@
tristate "SLC90E66 chipset support"
depends on BLK_DEV_IDEDMA_PCI
+config BLK_DEV_TRIFLEX
+ tristate "Compaq Triflex IDE support"
+ depends on BLK_DEV_IDEDMA_PCI
+ help
+ This driver adds DMA support for the Compaq Triflex IDE device.
+
config BLK_DEV_TRM290
tristate "Tekram TRM290 chipset support"
depends on BLK_DEV_IDEDMA_PCI
diff -urN -X exclude linux-2.5.50-ac1-clean/drivers/ide/pci/Makefile linux-2.5.50/drivers/ide/pci/Makefile
--- linux-2.5.50-ac1-clean/drivers/ide/pci/Makefile 2002-11-27 22:35:51.000000000 +0000
+++ linux-2.5.50/drivers/ide/pci/Makefile 2002-12-11 11:54:09.000000000 +0000
@@ -29,6 +29,7 @@
obj-$(CONFIG_BLK_DEV_SLC90E66) += slc90e66.o
obj-$(CONFIG_BLK_DEV_TRM290) += trm290.o
obj-$(CONFIG_BLK_DEV_VIA82CXXX) += via82cxxx.o
+obj-$(CONFIG_BLK_DEV_TRIFLEX) += triflex.o
# Must appear at the end of the block
obj-$(CONFIG_BLK_DEV_GENERIC) += generic.o
diff -urN -X exclude linux-2.5.50-ac1-clean/drivers/ide/pci/triflex.c linux-2.5.50/drivers/ide/pci/triflex.c
--- linux-2.5.50-ac1-clean/drivers/ide/pci/triflex.c 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.5.50/drivers/ide/pci/triflex.c 2002-12-12 14:39:06.000000000 +0000
@@ -0,0 +1,249 @@
+/*
+ * triflex.c
+ *
+ * IDE Chipset driver for the Compaq TriFlex IDE controller.
+ *
+ * Known to work with the Compaq Workstation 5x00 series.
+ *
+ * Copyright (C) 2002 Hewlett-Packard Development Group, L.P.
+ * Author: Torben Mathiasen <torben.mathiasen@hp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Loosely based on the piix & svwks drivers.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+#include <linux/hdreg.h>
+#include <linux/pci.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+
+#include "ide_modes.h"
+#include "triflex.h"
+
+static struct pci_dev *triflex_dev;
+
+static int triflex_get_info(char *buf, char **addr, off_t offset, int count)
+{
+ char *p = buf;
+
+ struct pci_dev *dev = triflex_dev;
+ u32 bibma = pci_resource_start(dev, 4);
+ u8 c0 = 0, c1 = 0;
+ u32 pri_timing, sec_timing;
+
+ p += sprintf(p, "\n Compaq Triflex Chipset\n");
+
+ pci_read_config_dword(dev, 0x70, &pri_timing);
+ pci_read_config_dword(dev, 0x74, &sec_timing);
+
+ /*
+ * at that point bibma+0x2 et bibma+0xa are byte registers
+ * to investigate:
+ */
+ c0 = inb((unsigned short)bibma + 0x02);
+ c1 = inb((unsigned short)bibma + 0x0a);
+
+ p += sprintf(p, "--------------- Primary Channel "
+ "---------------- Secondary Channel "
+ "-------------\n");
+ p += sprintf(p, " %sabled "
+ " %sabled\n",
+ (c0&0x80) ? "dis" : " en",
+ (c1&0x80) ? "dis" : " en");
+ p += sprintf(p, "--------------- drive0 --------- drive1 "
+ "-------- drive0 ---------- drive1 ------\n");
+ p += sprintf(p, "DMA enabled: %s %s "
+ " %s %s\n",
+ (c0&0x20) ? "yes" : "no ",
+ (c0&0x40) ? "yes" : "no ",
+ (c1&0x20) ? "yes" : "no ",
+ (c1&0x40) ? "yes" : "no " );
+
+ p += sprintf(p, "DMA\n");
+ p += sprintf(p, "PIO\n");
+
+ return p-buf;
+}
+
+static int triflex_tune_chipset(ide_drive_t *drive, u8 xferspeed)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = hwif->pci_dev;
+ u8 channel_offset = hwif->channel ? 0x74 : 0x70;
+ u16 timing = 0;
+ u32 triflex_timings = 0;
+ u8 unit = (drive->select.b.unit & 0x01);
+ u8 speed = ide_rate_filter(0, xferspeed);
+
+ pci_read_config_dword(dev, channel_offset, &triflex_timings);
+
+ switch(speed) {
+ case XFER_MW_DMA_2:
+ timing = 0x0103;
+ break;
+ case XFER_MW_DMA_1:
+ timing = 0x0203;
+ break;
+ case XFER_MW_DMA_0:
+ timing = 0x0808;
+ break;
+ case XFER_SW_DMA_2:
+ case XFER_SW_DMA_1:
+ case XFER_SW_DMA_0:
+ timing = 0x0f0f;
+ break;
+ case XFER_PIO_4:
+ timing = 0x0202;
+ break;
+ case XFER_PIO_3:
+ timing = 0x0204;
+ break;
+ case XFER_PIO_2:
+ timing = 0x0404;
+ break;
+ case XFER_PIO_1:
+ timing = 0x0508;
+ break;
+ case XFER_PIO_0:
+ timing = 0x0808;
+ break;
+ default:
+ return -1;
+ }
+
+ triflex_timings &= ~(0xFFFF << (16 * unit));
+ triflex_timings |= (timing << (16 * unit));
+
+ pci_write_config_dword(dev, channel_offset, triflex_timings);
+
+ return (ide_config_drive_speed(drive, speed));
+}
+
+static void triflex_tune_drive(ide_drive_t *drive, u8 pio)
+{
+ int use_pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ (void) triflex_tune_chipset(drive, (XFER_PIO_0 + use_pio));
+}
+
+static int triflex_config_drive_for_dma(ide_drive_t *drive)
+{
+ int speed = ide_dma_speed(drive, 0); /* No ultra speeds */
+
+ if (!speed) {
+ u8 pspeed = ide_get_best_pio_mode(drive, 255, 4, NULL);
+ speed = XFER_PIO_0 + pspeed;
+ }
+
+ (void) triflex_tune_chipset(drive, speed);
+ return ide_dma_enable(drive);
+}
+
+static int triflex_config_drive_xfer_rate(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct hd_driveid *id = drive->id;
+
+ if (id && (id->capability & 1) && drive->autodma) {
+ if (hwif->ide_dma_bad_drive(drive))
+ goto tune_pio;
+ if (id->field_valid & 2) {
+ if ((id->dma_mword & hwif->mwdma_mask) ||
+ (id->dma_1word & hwif->swdma_mask)) {
+ if (!triflex_config_drive_for_dma(drive))
+ goto tune_pio;
+ }
+ } else
+ goto tune_pio;
+ } else {
+tune_pio:
+ hwif->tuneproc(drive, 255);
+ return hwif->ide_dma_off_quietly(drive);
+ }
+
+ return hwif->ide_dma_on(drive);
+}
+
+static void __init init_hwif_triflex(ide_hwif_t *hwif)
+{
+ hwif->tuneproc = &triflex_tune_drive;
+ hwif->speedproc = &triflex_tune_chipset;
+
+ hwif->atapi_dma = 1;
+ hwif->mwdma_mask = 0x07;
+ hwif->swdma_mask = 0x07;
+ hwif->ide_dma_check = &triflex_config_drive_xfer_rate;
+
+ if (!noautodma)
+ hwif->autodma = 1;
+ hwif->drives[0].autodma = hwif->autodma;
+ hwif->drives[1].autodma = hwif->autodma;
+}
+
+static unsigned int __init init_chipset_triflex(struct pci_dev *dev,
+ const char *name)
+{
+#ifdef CONFIG_PROC_FS
+ ide_pci_register_host_proc(&triflex_proc);
+#endif
+ return 0;
+}
+
+static int __devinit triflex_init_one(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ ide_pci_device_t *d = &triflex_devices[id->driver_data];
+ if (dev->device != d->device)
+ BUG();
+
+ ide_setup_pci_device(dev, d);
+ triflex_dev = dev;
+ MOD_INC_USE_COUNT;
+
+ return 0;
+}
+
+static struct pci_driver driver = {
+ .name = "TRIFLEX IDE",
+ .id_table = triflex_pci_tbl,
+ .probe = triflex_init_one,
+};
+
+static int triflex_ide_init(void)
+{
+ return ide_pci_register_driver(&driver);
+}
+
+static void triflex_ide_exit(void)
+{
+ ide_pci_unregister_driver(&driver);
+}
+
+module_init(triflex_ide_init);
+module_exit(triflex_ide_exit);
+
+MODULE_AUTHOR("Torben Mathiasen");
+MODULE_DESCRIPTION("PCI driver module for Compaq Triflex IDE");
+MODULE_LICENSE("GPL");
+
+
diff -urN -X exclude linux-2.5.50-ac1-clean/drivers/ide/pci/triflex.h linux-2.5.50/drivers/ide/pci/triflex.h
--- linux-2.5.50-ac1-clean/drivers/ide/pci/triflex.h 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.5.50/drivers/ide/pci/triflex.h 2002-12-12 14:54:02.000000000 +0000
@@ -0,0 +1,55 @@
+/*
+ * triflex.h
+ *
+ * Copyright (C) 2002 Hewlett-Packard Development Group, L.P.
+ * Author: Torben Mathiasen <torben.mathiasen@hp.com>
+ *
+ */
+#ifndef TRIFLEX_H
+#define TRIFLEX_H
+
+#include <linux/config.h>
+#include <linux/pci.h>
+#include <linux/ide.h>
+
+static unsigned int __devinit init_chipset_triflex(struct pci_dev *, const char *);
+static void init_hwif_triflex(ide_hwif_t *);
+static int triflex_get_info(char *, char **, off_t, int);
+
+static ide_pci_device_t triflex_devices[] __devinitdata = {
+ {
+ .vendor PCI_VENDOR_ID_COMPAQ,
+ .device PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE,
+ .name "TRIFLEX",
+ .init_chipset init_chipset_triflex,
+ .init_iops NULL,
+ .init_hwif init_hwif_triflex,
+ .channels 2,
+ .autodma AUTODMA,
+ .enablebits {{0x80, 0x01, 0x01}, {0x80, 0x02, 0x02}},
+ .bootable ON_BOARD,
+ .extra 0,
+ },{
+ .vendor 0,
+ .device 0,
+ .channels 0,
+ .bootable EOL,
+ }
+};
+
+#ifdef CONFIG_PROC_FS
+static ide_pci_host_proc_t triflex_proc __initdata = {
+ name: "triflex",
+ set: 1,
+ get_info: triflex_get_info,
+ parent: NULL,
+};
+#endif
+
+static struct pci_device_id triflex_pci_tbl[] __devinitdata = {
+ { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, 0 },
+ { 0, },
+};
+
+#endif /* TRIFLEX_H */
diff -urN -X exclude linux-2.5.50-ac1-clean/include/linux/pci_ids.h linux-2.5.50/include/linux/pci_ids.h
--- linux-2.5.50-ac1-clean/include/linux/pci_ids.h 2002-12-12 14:48:51.000000000 +0000
+++ linux-2.5.50/include/linux/pci_ids.h 2002-12-12 13:50:54.000000000 +0000
@@ -136,6 +136,7 @@
#define PCI_DEVICE_ID_COMPAQ_TACHYON 0xa0fc
#define PCI_DEVICE_ID_COMPAQ_SMART2P 0xae10
#define PCI_DEVICE_ID_COMPAQ_NETEL100 0xae32
+#define PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE 0xae33
#define PCI_DEVICE_ID_COMPAQ_NETEL10 0xae34
#define PCI_DEVICE_ID_COMPAQ_NETFLEX3I 0xae35
#define PCI_DEVICE_ID_COMPAQ_NETEL100D 0xae40
--Nq2Wo0NMKNjxTN9z--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/