21041 transmit timed out

Geert Uytterhoeven (geert@linux-m68k.org)
Sun, 29 Dec 2002 15:37:18 +0100 (MET)


Apparently this problem is still present in 2.4.20. It's been many months ago I
saw it, though.

| NETDEV WATCHDOG: eth0: transmit timed out
| eth0: 21041 transmit timed out, status fc6908c5, CSR12 000051c8, CSR13 ffff0001, CSR14 ffffffff, resetting...
| eth0: 21143 100baseTx sensed media.
^^^^^^^^^^^^^^^
ifconfig down/up fixed the problem.

lspci output:

| 00:04.0 Ethernet controller: Digital Equipment Corporation DECchip 21041 [Tulip Pass 3] (rev 21)
| Subsystem: D-Link System Inc DE-530+
| Flags: bus master, medium devsel, latency 0, IRQ 29
| I/O ports at 1080 [size=128]
| Memory at c1080000 (32-bit, non-prefetchable) [size=128]
| Expansion ROM at c11c0000 [disabled] [size=256K]

Driver startup output:

| Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
| PCI: Enabling device 00:04.0 (0000 -> 0003)
| tulip0: 21041 Media table, default media 0800 (Autosense).
| tulip0: 21041 media #0, 10baseT.
| tulip0: 21041 media #4, 10baseT-FDX.
| tulip0: 21041 media #1, 10base2.
| eth0: Digital DC21041 Tulip rev 33 at 0xc9855000, 21041 mode, 00:80:C8:5A:F8:5B, IRQ 29.

Machine is a PPC box (CHRP LongTrail).

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/