> Paul> I'm just playing a little bit with Kernel 2.5.53, and I've been
> Paul> afraid of finding it quite slow...
>
> Not a bad report, but you didn't give any info on the machine
> configuration in terms of:
>
> - CPU type and speed
> - memory
> - disk
>
Correct. Here are some more :
6 [18:34] rol@donald:/kernels> cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.40GHz
stepping : 4
cpu MHz : 2423.933
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 4836.55
7 [18:34] rol@donald:/kernels> cat /proc/meminfo
total: used: free: shared: buffers: cached:
Mem: 526839808 516452352 10387456 0 18071552 403718144
Swap: 3764346880 2527232 3761819648
MemTotal: 514492 kB
MemFree: 10144 kB
MemShared: 0 kB
Buffers: 17648 kB
Cached: 392980 kB
SwapCached: 1276 kB
Active: 289588 kB
Inactive: 167568 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 514492 kB
LowFree: 10144 kB
SwapTotal: 3676120 kB
SwapFree: 3673652 kB
8 [18:34] rol@donald:/kernels> df -aT
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/hda2 ext3 2063536 1210488 748224 62% /
none proc 0 0 0 - /proc
/dev/hda8 ext3 46267844 7936068 35981472 19% /data
none devpts 0 0 0 - /dev/pts
none tmpfs 257244 0 257244 0% /dev/shm
/dev/hda4 ext3 12317944 404104 11288112 4% /usr/local
/dev/hda7 ext3 2063504 99620 1859064 6% /var
/dev/sda1 ext3 10320888 692592 9103960 8% /kernels
/dev/sda3 ext3 7740648 630368 6717016 9% /witbe
/dev/sda6 reiserfs 10919580 32840 10886740 1% /divers
/dev/hdb6 reiserfs 29406044 19067932 10338112 65% /mp3
/dev/hda1 ntfs 2096450 1279606 816844 62% /diskC
/dev/hda5 ntfs 10241404 4065772 6175632 40% /diskF
/dev/hdb2 vfat 5122732 3047232 2075500 60% /diskD
/dev/hdb5 vfat 5122704 900844 4221860 18% /diskE
/dev/cdrom iso9660 60760 60760 0 100% /mnt/cdrom
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
SIS5513: IDE controller on PCI bus 00 dev 15
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SiS5513
ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD800BB-00CAA1, ATA DISK drive
hdb: IC35L040AVER07-0, ATA DISK drive
hdc: MATSHITADVD-ROM SR-8584A, ATAPI CD/DVD-ROM drive
hdd: TDK CDRW4800B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63
hdb: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=5005/255/63
hdc: ATAPI 32X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.12
ide-cd: passing drive hdd to ide-scsi emulation.
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 > hda4
hdb: hdb1 hdb2 hdb3 < hdb5 hdb6 >
...
SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec 2940 Ultra2 SCSI adapter>
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
(scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
Vendor: FUJITSU Model: MAN3367MP Rev: 5507
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:0:0: Tagged Queuing enabled. Depth 253
...
Hope this helps,
Regards,
Paul
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/