Re: UDMA 133 on a 40 pin cable

Teodor Iacob (Teodor.Iacob@astral.kappa.ro)
Thu, 2 Jan 2003 21:23:16 +0200

> >00:11.1 IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master
> >IDE (rev 06)
> >
> >hdd: Maxtor 6Y060L0, ATA DISK drive
> >
> >the harddisk is DiamondPlus9 60GB 7200 rpm UDMA133 .. and the mainbboard
> >is Soltek 75-FRV
> >with KT400 chipset
> >
> >
>
> What's hdc? Hdd is the secondary slave. If it's the only device on
> the chain you should make sure you jumper the drive as a master.

HDC it's a CD-RW .. it was not used at the time of the error ( i was doing
mke2fs on hdd1 when I got those errors in dmesg ).

>
>
> --
> There is no such thing as obsolete hardware.
> Merely hardware that other people don't want.
> (The Second Rule of Hardware Acquisition)
> Sam Flory <sflory@rackable.com>
>
> 

-- 
      Teodor Iacob,
Network Administrator
Astral TELECOM Internet
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/