--=_courier-24543-1042648391-0001-2
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Can you test the enclosed patch. It seems to be both simple and to
resolve the resource collisions and the "No IRQ known" problem.
I added a smal comment (and modified another) so future janitors won't
move pci_enable above pci_assign_resource again.
If everyone is ok, I can send it to Linus for inclusion in BK (I have
the green light of Dave Jones).
Thanks,
Yaacov Akiba Slama
Mikael Pettersson wrote:
>Jens Taprogge writes:
> > The cardbus problems are caused by
> >
> > ChangeSet@1.797.145.6 2002-11-25 18:31:10-08:00 davej@codemonkey.org.uk
> >
> > as far as I can tell.
> >
> > pci_enable_device() will fail at least on i386 (see
> > arch/i386/pci/i386.c: pcibios_enable_resource (line 260)) if the
> > resources have not been assigned previously. Hence the ostensible
> > resource collisions.
> >
> > The attached patch should fix the problem.
> >
> > I have send the patch to Dave Jones some time ago but did not hear from
> > him yet.
> >
> > I am not subscribed to the list so please cc me on replys.
>
>Thanks. Your patch fixed the cardbus hotplug issue perfectly on my laptop.
>It survives multiple insert/eject cycles without any problems.
>
>The patch posted by Yaacov Akiba Slama today also fixed cardbus hotplug
>for me, but with his patch the kernel still prints "PCI: No IRQ known for
>interrupt pin A of device xx:xx.x. Please try using pci=biosirq" when the
>cardbus NIC is inserted; Jens Taprogge's patch silenced that warning.
>
>/Mikael
>
>
>
--=_courier-24543-1042648391-0001-2
Content-Type: text/plain; name="cardbus-rom.patch"; charset=iso-8859-1
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="cardbus-rom.patch"
--- drivers/pcmcia/cardbus.c.original 2003-01-14 19:38:49.000000000 +0200
+++ drivers/pcmcia/cardbus.c 2003-01-15 18:21:40.000000000 +0200
@@ -285,25 +285,29 @@
dev->dev.dma_mask = &dev->dma_mask;
pci_setup_device(dev);
- if (pci_enable_device(dev))
- continue;
strcpy(dev->dev.bus_id, dev->slot_name);
- /* FIXME: Do we need to enable the expansion ROM? */
+ /* We need to assign resources for expansion ROM. */
for (r = 0; r < 7; r++) {
struct resource *res = dev->resource + r;
- if (res->flags)
+ if (!res->start && res->end)
pci_assign_resource(dev, r);
}
/* Does this function have an interrupt at all? */
pci_readb(dev, PCI_INTERRUPT_PIN, &irq_pin);
- if (irq_pin) {
+ if (irq_pin)
dev->irq = irq;
- pci_writeb(dev, PCI_INTERRUPT_LINE, irq);
- }
+
+ /* pci_enable_device needs to be called after pci_assign_resource */
+ /* because it returns an error if (!res->start && res->end). */
+ if (pci_enable_device(dev))
+ continue;
+ if (irq_pin)
+ pci_writeb(dev, PCI_INTERRUPT_LINE, irq);
+
device_register(&dev->dev);
pci_insert_device(dev, bus);
}
--=_courier-24543-1042648391-0001-2--