[2.]
since I used Kernel 2.4.18 [in order to get an usb scanner going] ,
reading from my Sony CDU31a CD drive gets a Segmentation fault
[see attachment syslog, near the end of it]
Mounting and dir reading is possible however.
System usually hangs after that.
Remedy:using kernel 2.2.17 or 2.2.20.
[3.]
Module [CDU31a,CDrom]
[4.]
Linux version 2.4.18 (root@PENT) (gcc version 2.95.4 20011002 (Debian
prerelease)) #9 SMP Sat Jan 18 19:20:38 UTC 2003
[5.]
Oops Msg: see syslog Attachment
[6.]
mount /crom [works normal]
ls /cdrom [works normal]
cp /cdrom/something-big /tmp [Segmentation fault occurs]
[7.1]
max@PENT:/usr/src/kernel-source-2.4.18/scripts$ ./ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux PENT 2.4.18 #9 SMP Sat Jan 18 19:20:38 UTC 2003 i586 unknown
Gnu C 2.95.4
Gnu make 3.79.1
util-linux 2.11n
mount 2.11n
modutils 2.4.15
e2fsprogs 1.27
PPP 2.4.1
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 2.0.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 2.0.11
Modules Loaded scanner usb-ohci usbcore isofs serial cdu31a cdrom msdos
vfat fat lp sb sb_lib uart401 sound soundcore ne 8390 parport_pc parport
[7.2]
max@PENT:/usr/src/kernel-source-2.4.18/scripts$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 5
model : 2
model name : Pentium 75 - 200
stepping : 5
cpu MHz : 100.017
fdiv_bug : no
hlt_bug : no
f00f_bug : yes
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 apic
bogomips : 199.47
processor : 1
vendor_id : GenuineIntel
cpu family : 5
model : 2
model name : Pentium 75 - 200
stepping : 5
cpu MHz : 100.017
fdiv_bug : no
hlt_bug : no
f00f_bug : yes
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 apic
bogomips : 199.88
[7.3]
max@PENT:/usr/src/kernel-source-2.4.18/scripts$ cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
0220-022f : soundblaster
0230-0233 : cdu31a
02f8-02ff : serial(auto)
0300-031f : eth0
0330-0333 : MPU-401 UART
0378-037a : parport0
03c0-03df : vga+
03f0-03f5 : floppy
03f6-03f6 : ide0
03f7-03f7 : floppy DIR
03f8-03ff : serial(auto)
0cf8-0cfb : PCI conf2
max@PENT:/usr/src/kernel-source-2.4.18/scripts$ cat /proc/iomem
00000000-0009ffff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-047fffff : System RAM
00100000-001e4dc3 : Kernel code
001e4dc4-0021c3bf : Kernel data
f0000000-f3ffffff : S3 Inc. Trio 64V2/DX or /GX
f4000000-f4000fff : OPTi Inc. 82C861
f4000000-f4000fff : usb-ohci
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved
[7.5]
max@PENT:/usr/src/kernel-source-2.4.18/scripts$ lspci -vvv
00:00.0 Class 0600: 8086:04a3 (rev 11)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 32 set
00:02.0 Class 0000: 8086:0482 (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 set
00:04.0 Class 0300: 5333:8901 (rev 04)
Subsystem: 5333:8901
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 12
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=64M]
Expansion ROM at <unassigned> [disabled] [size=64K]
00:05.0 Class 0c03: 1045:c861 (rev 10) (prog-if 10)
Subsystem: 1045:c861
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
Latency: 32 set
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=4K]
[7.6] no scsi
[7.7]
max@PENT:/usr/src/kernel-source-2.4.18/scripts$ cat /proc/interrupts
CPU0 CPU1
0: 355521 341790 IO-APIC-edge timer
1: 3736 4088 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
4: 18008 16511 IO-APIC-edge serial
5: 3 0 IO-APIC-edge soundblaster
6: 61 34 IO-APIC-edge floppy
7: 0 0 IO-APIC-edge parport0
8: 2 1 IO-APIC-edge rtc
10: 0 0 IO-APIC-edge NE2000
11: 0 0 IO-APIC-edge usb-ohci
14: 286183 287128 IO-APIC-edge ide0
NMI: 0 0
LOC: 697282 697296
ERR: 0
MIS: 0
[X]
work-around: booting Kernel 2.2.17 or 2.2.20 [latest pre 2.4.18 Kernel]
Remark: modul options are: cdu31a_port=0x230
[no interrupts.They didnt work with old kernel neither.]
CDU31 is connected onto a Soundblaster.Used to have CDU31 connected to WDH7102
With that, interrupts could be set and it worked.Tried that with the new 2.4.18
Kernel:
same Segmentation Fault.
Thank you and God bless.
-- Max Euer - Oud Lemiers 18 - NL6295AT Lemiers - T (NL 043)306 4692 --------------28FCB2E8AB673287CABC68EB Content-Type: text/plain; charset=us-ascii; name="syslog" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="syslog"Jan 19 20:32:37 PENT syslogd 1.4.1#10: restart. Jan 19 20:32:37 PENT kernel: klogd 1.4.1#10, log source = /proc/kmsg started. Jan 19 20:32:37 PENT kernel: Inspecting /boot/System.map-2.4.18 Jan 19 20:32:38 PENT rpc.statd[179]: Version 1.0 Starting Jan 19 20:32:39 PENT lpd[190]: restarted Jan 19 20:32:40 PENT kernel: Loaded 14193 symbols from /boot/System.map-2.4.18. Jan 19 20:32:40 PENT kernel: Symbols match kernel version 2.4.18. Jan 19 20:32:40 PENT kernel: Loaded 338 symbols from 20 modules. Jan 19 20:32:40 PENT kernel: Linux version 2.4.18 (root@PENT) (gcc version 2.95.4 20011002 (Debian prerelease)) #9 SMP Sat Jan 18 19:20:38 UTC 2003 Jan 19 20:32:40 PENT kernel: BIOS-provided physical RAM map: Jan 19 20:32:40 PENT kernel: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) Jan 19 20:32:40 PENT kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Jan 19 20:32:40 PENT kernel: BIOS-e820: 0000000000100000 - 0000000004800000 (usable) Jan 19 20:32:40 PENT kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Jan 19 20:32:40 PENT kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Jan 19 20:32:40 PENT kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Jan 19 20:32:40 PENT kernel: found SMP MP-table at 000fba00 Jan 19 20:32:40 PENT kernel: hm, page 000fb000 reserved twice. Jan 19 20:32:40 PENT kernel: hm, page 000fc000 reserved twice. Jan 19 20:32:40 PENT kernel: hm, page 000fb000 reserved twice. Jan 19 20:32:40 PENT kernel: hm, page 000fc000 reserved twice. Jan 19 20:32:40 PENT kernel: On node 0 totalpages: 18432 Jan 19 20:32:40 PENT kernel: zone(0): 4096 pages. Jan 19 20:32:40 PENT kernel: zone(1): 14336 pages. Jan 19 20:32:40 PENT kernel: zone(2): 0 pages. Jan 19 20:32:40 PENT kernel: Intel MultiProcessor Specification v1.1 Jan 19 20:32:40 PENT kernel: Virtual Wire compatibility mode. Jan 19 20:32:40 PENT kernel: OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Jan 19 20:32:40 PENT kernel: Processor #0 Pentium(tm) APIC version 17 Jan 19 20:32:40 PENT kernel: Processor #1 Pentium(tm) APIC version 17 Jan 19 20:32:40 PENT kernel: I/O APIC #2 Version 17 at 0xFEC00000. Jan 19 20:32:40 PENT kernel: Processors: 2 Jan 19 20:32:40 PENT kernel: Kernel command line: auto BOOT_IMAGE=Linux ro root=303 Jan 19 20:32:40 PENT kernel: Initializing CPU#0 Jan 19 20:32:40 PENT kernel: Detected 100.016 MHz processor. Jan 19 20:32:40 PENT kernel: Console: colour VGA+ 132x25 Jan 19 20:32:40 PENT kernel: Calibrating delay loop... 199.47 BogoMIPS Jan 19 20:32:40 PENT kernel: Memory: 70444k/73728k available (915k kernel code, 2900k reserved, 221k data, 208k init, 0k highmem) Jan 19 20:32:40 PENT kernel: Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) Jan 19 20:32:40 PENT kernel: Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) Jan 19 20:32:40 PENT kernel: Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) Jan 19 20:32:40 PENT kernel: Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Jan 19 20:32:40 PENT kernel: Page-cache hash table entries: 32768 (order: 5, 131072 bytes) Jan 19 20:32:40 PENT kernel: CPU: Before vendor init, caps: 000003bf 00000000 00000000, vendor = 0 Jan 19 20:32:40 PENT kernel: Intel Pentium with F0 0F bug - workaround enabled. Jan 19 20:32:40 PENT kernel: CPU: After vendor init, caps: 000003bf 00000000 00000000 00000000 Jan 19 20:32:40 PENT kernel: CPU: After generic, caps: 000003bf 00000000 00000000 00000000 Jan 19 20:32:40 PENT kernel: CPU: Common caps: 000003bf 00000000 00000000 00000000 Jan 19 20:32:40 PENT kernel: Checking 'hlt' instruction... OK. Jan 19 20:32:40 PENT kernel: POSIX conformance testing by UNIFIX Jan 19 20:32:40 PENT kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) Jan 19 20:32:40 PENT kernel: mtrr: detected mtrr type: none Jan 19 20:32:40 PENT kernel: CPU: Before vendor init, caps: 000003bf 00000000 00000000, vendor = 0 Jan 19 20:32:40 PENT kernel: CPU: After vendor init, caps: 000003bf 00000000 00000000 00000000 Jan 19 20:32:40 PENT kernel: CPU: After generic, caps: 000003bf 00000000 00000000 00000000 Jan 19 20:32:40 PENT kernel: CPU: Common caps: 000003bf 00000000 00000000 00000000 Jan 19 20:32:40 PENT kernel: CPU0: Intel Pentium 75 - 200 stepping 05 Jan 19 20:32:40 PENT kernel: per-CPU timeslice cutoff: 158.92 usecs. Jan 19 20:32:40 PENT kernel: enabled ExtINT on CPU#0 Jan 19 20:32:40 PENT kernel: ESR value before enabling vector: 00000000 Jan 19 20:32:40 PENT kernel: ESR value after enabling vector: 00000000 Jan 19 20:32:40 PENT kernel: Booting processor 1/1 eip 2000 Jan 19 20:32:40 PENT kernel: Initializing CPU#1 Jan 19 20:32:40 PENT kernel: masked ExtINT on CPU#1 Jan 19 20:32:40 PENT kernel: ESR value before enabling vector: 00000000 Jan 19 20:32:40 PENT kernel: ESR value after enabling vector: 00000000 Jan 19 20:32:40 PENT kernel: Calibrating delay loop... 199.88 BogoMIPS Jan 19 20:32:40 PENT kernel: CPU: Before vendor init, caps: 000003bf 00000000 00000000, vendor = 0 Jan 19 20:32:40 PENT kernel: CPU: After vendor init, caps: 000003bf 00000000 00000000 00000000 Jan 19 20:32:40 PENT kernel: CPU: After generic, caps: 000003bf 00000000 00000000 00000000 Jan 19 20:32:40 PENT kernel: CPU: Common caps: 000003bf 00000000 00000000 00000000 Jan 19 20:32:40 PENT kernel: CPU1: Intel Pentium 75 - 200 stepping 05 Jan 19 20:32:40 PENT kernel: Total of 2 processors activated (399.36 BogoMIPS). Jan 19 20:32:40 PENT kernel: ENABLING IO-APIC IRQs Jan 19 20:32:40 PENT kernel: Setting 2 in the phys_id_present_map Jan 19 20:32:40 PENT kernel: ...changing IO-APIC physical APIC ID to 2 ... ok. Jan 19 20:32:40 PENT kernel: init IO_APIC IRQs Jan 19 20:32:40 PENT kernel: IO-APIC (apicid-pin) 2-0 not connected. Jan 19 20:32:40 PENT kernel: ..TIMER: vector=0x31 pin1=2 pin2=-1 Jan 19 20:32:40 PENT kernel: number of MP IRQ sources: 15. Jan 19 20:32:40 PENT kernel: number of IO-APIC #2 registers: 16. Jan 19 20:32:40 PENT kernel: testing the IO APIC....................... Jan 19 20:32:40 PENT kernel: Jan 19 20:32:40 PENT kernel: IO APIC #2...... Jan 19 20:32:40 PENT kernel: .... register #00: 02000000 Jan 19 20:32:40 PENT kernel: ....... : physical APIC id: 02 Jan 19 20:32:40 PENT kernel: .... register #01: 000F0011 Jan 19 20:32:40 PENT kernel: ....... : max redirection entries: 000F Jan 19 20:32:40 PENT kernel: ....... : PRQ implemented: 0 Jan 19 20:32:40 PENT kernel: ....... : IO APIC version: 0011 Jan 19 20:32:40 PENT kernel: .... register #02: 00000000 Jan 19 20:32:40 PENT kernel: ....... : arbitration: 00 Jan 19 20:32:40 PENT kernel: .... IRQ redirection table: Jan 19 20:32:40 PENT kernel: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: Jan 19 20:32:40 PENT kernel: 00 000 00 1 0 0 0 0 0 0 00 Jan 19 20:32:40 PENT kernel: 01 003 03 0 0 0 0 0 1 1 39 Jan 19 20:32:40 PENT kernel: 02 003 03 0 0 0 0 0 1 1 31 Jan 19 20:32:40 PENT kernel: 03 003 03 0 0 0 0 0 1 1 41 Jan 19 20:32:40 PENT kernel: 04 003 03 0 0 0 0 0 1 1 49 Jan 19 20:32:40 PENT kernel: 05 003 03 0 0 0 0 0 1 1 51 Jan 19 20:32:40 PENT kernel: 06 003 03 0 0 0 0 0 1 1 59 Jan 19 20:32:40 PENT kernel: 07 003 03 0 0 0 0 0 1 1 61 Jan 19 20:32:40 PENT kernel: 08 003 03 0 0 0 0 0 1 1 69 Jan 19 20:32:40 PENT kernel: 09 003 03 0 0 0 0 0 1 1 71 Jan 19 20:32:40 PENT kernel: 0a 003 03 0 0 0 0 0 1 1 79 Jan 19 20:32:40 PENT kernel: 0b 003 03 0 0 0 0 0 1 1 81 Jan 19 20:32:40 PENT kernel: 0c 003 03 0 0 0 0 0 1 1 89 Jan 19 20:32:40 PENT kernel: 0d 003 03 0 0 0 0 0 1 1 91 Jan 19 20:32:40 PENT kernel: 0e 003 03 0 0 0 0 0 1 1 99 Jan 19 20:32:40 PENT kernel: 0f 003 03 0 0 0 0 0 1 1 A1 Jan 19 20:32:40 PENT kernel: IRQ to pin mappings: Jan 19 20:32:40 PENT kernel: IRQ0 -> 0:2 Jan 19 20:32:40 PENT kernel: IRQ1 -> 0:1 Jan 19 20:32:40 PENT kernel: IRQ3 -> 0:3 Jan 19 20:32:40 PENT kernel: IRQ4 -> 0:4 Jan 19 20:32:40 PENT kernel: IRQ5 -> 0:5 Jan 19 20:32:40 PENT kernel: IRQ6 -> 0:6 Jan 19 20:32:40 PENT kernel: IRQ7 -> 0:7 Jan 19 20:32:40 PENT kernel: IRQ8 -> 0:8 Jan 19 20:32:40 PENT kernel: IRQ9 -> 0:9 Jan 19 20:32:40 PENT kernel: IRQ10 -> 0:10 Jan 19 20:32:40 PENT kernel: IRQ11 -> 0:11 Jan 19 20:32:40 PENT kernel: IRQ12 -> 0:12 Jan 19 20:32:40 PENT kernel: IRQ13 -> 0:13 Jan 19 20:32:40 PENT kernel: IRQ14 -> 0:14 Jan 19 20:32:40 PENT kernel: IRQ15 -> 0:15 Jan 19 20:32:40 PENT kernel: .................................... done. Jan 19 20:32:40 PENT kernel: Using local APIC timer interrupts. Jan 19 20:32:40 PENT kernel: calibrating APIC timer ... Jan 19 20:32:40 PENT kernel: ..... CPU clock speed is 100.0189 MHz. Jan 19 20:32:40 PENT kernel: ..... host bus clock speed is 66.6787 MHz. Jan 19 20:32:40 PENT kernel: cpu: 0, clocks: 666787, slice: 222262 Jan 19 20:32:40 PENT kernel: CPU0<T0:666784,T1:444512,D:10,S:222262,C:666787> Jan 19 20:32:40 PENT kernel: cpu: 1, clocks: 666787, slice: 222262 Jan 19 20:32:40 PENT kernel: CPU1<T0:666784,T1:222256,D:4,S:222262,C:666787> Jan 19 20:32:40 PENT kernel: checking TSC synchronization across CPUs: passed. Jan 19 20:32:40 PENT kernel: Waiting on wait_init_idle (map = 0x2) Jan 19 20:32:40 PENT kernel: All processors have done init_idle Jan 19 20:32:40 PENT kernel: PCI: PCI BIOS revision 2.00 entry at 0xfa880, last bus=0 Jan 19 20:32:40 PENT kernel: PCI: Using configuration type 2 Jan 19 20:32:40 PENT kernel: PCI: Probing PCI hardware Jan 19 20:32:40 PENT kernel: PCI BIOS passed nonexistent PCI bus 0! Jan 19 20:32:40 PENT kernel: PCI BIOS passed nonexistent PCI bus 0! Jan 19 20:32:40 PENT kernel: Linux NET4.0 for Linux 2.4 Jan 19 20:32:40 PENT kernel: Based upon Swansea University Computer Society NET3.039 Jan 19 20:32:40 PENT kernel: Initializing RT netlink socket Jan 19 20:32:40 PENT kernel: Starting kswapd Jan 19 20:32:40 PENT kernel: pty: 256 Unix98 ptys configured Jan 19 20:32:40 PENT kernel: Real Time Clock Driver v1.10e Jan 19 20:32:40 PENT kernel: block: 128 slots per queue, batch=32 Jan 19 20:32:40 PENT kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31 Jan 19 20:32:40 PENT kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Jan 19 20:32:40 PENT kernel: hda: ST33232A, ATA DISK drive Jan 19 20:32:40 PENT kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Jan 19 20:32:40 PENT kernel: hda: 6303024 sectors (3227 MB) w/128KiB Cache, CHS=781/128/63 Jan 19 20:32:40 PENT kernel: Partition check: Jan 19 20:32:40 PENT kernel: hda: hda1 hda2 < hda5 > hda3 hda4 Jan 19 20:32:40 PENT kernel: Floppy drive(s): fd0 is 1.44M, fd1 is 1.2M Jan 19 20:32:40 PENT kernel: FDC 0 is an 8272A Jan 19 20:32:40 PENT kernel: NET4: Linux TCP/IP 1.0 for NET4.0 Jan 19 20:32:40 PENT kernel: IP Protocols: ICMP, UDP, TCP Jan 19 20:32:40 PENT kernel: IP: routing cache hash table of 512 buckets, 4Kbytes Jan 19 20:32:40 PENT kernel: TCP: Hash tables configured (established 8192 bind 8192) Jan 19 20:32:40 PENT kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Jan 19 20:32:40 PENT kernel: VFS: Mounted root (ext2 filesystem) readonly. Jan 19 20:32:40 PENT kernel: Freeing unused kernel memory: 208k freed Jan 19 20:32:40 PENT kernel: Adding Swap: 177400k swap-space (priority -1) Jan 19 20:32:40 PENT kernel: parport0: PC-style at 0x378, irq 7 [PCSPP] Jan 19 20:32:40 PENT kernel: ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com) Jan 19 20:32:40 PENT kernel: Last modified Nov 1, 2000 by Paul Gortmaker Jan 19 20:32:40 PENT kernel: NE*000 ethercard probe at 0x300: 00 00 e8 0c c2 a7 Jan 19 20:32:40 PENT kernel: eth0: NE2000 found at 0x300, using IRQ 10. Jan 19 20:32:40 PENT kernel: Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996 Jan 19 20:32:40 PENT kernel: SB 4.13 detected OK (220) Jan 19 20:32:40 PENT kernel: lp0: using parport0 (interrupt-driven). Jan 19 20:32:40 PENT kernel: usb.c: registered new driver usbdevfs Jan 19 20:32:40 PENT kernel: usb.c: registered new driver hub Jan 19 20:32:40 PENT kernel: usb-ohci.c: USB OHCI at membase 0xc5087000, IRQ 11 Jan 19 20:32:40 PENT kernel: usb-ohci.c: usb-00:05.0, OPTi Inc. 82C861 Jan 19 20:32:40 PENT kernel: usb.c: new USB bus registered, assigned bus number 1 Jan 19 20:32:40 PENT kernel: usb.c: kmalloc IF c11249c0, numif 1 Jan 19 20:32:40 PENT kernel: usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1 Jan 19 20:32:40 PENT kernel: usb.c: USB device number 1 default language ID 0x0 Jan 19 20:32:40 PENT kernel: Product: USB OHCI Root Hub Jan 19 20:32:40 PENT kernel: SerialNumber: c5087000 Jan 19 20:32:40 PENT kernel: hub.c: USB hub found Jan 19 20:32:40 PENT kernel: hub.c: 2 ports detected Jan 19 20:32:40 PENT kernel: hub.c: standalone hub Jan 19 20:32:40 PENT kernel: hub.c: ganged power switching Jan 19 20:32:40 PENT kernel: hub.c: global over-current protection Jan 19 20:32:40 PENT kernel: hub.c: Port indicators are not supported Jan 19 20:32:40 PENT kernel: hub.c: power on to power good time: 2ms Jan 19 20:32:40 PENT kernel: hub.c: hub controller current requirement: 0mA Jan 19 20:32:40 PENT kernel: hub.c: port removable status: RR Jan 19 20:32:40 PENT kernel: hub.c: local power source is good Jan 19 20:32:40 PENT kernel: hub.c: no over-current condition exists Jan 19 20:32:40 PENT kernel: hub.c: enabling power on all ports Jan 19 20:32:40 PENT kernel: usb.c: hub driver claimed interface c11249c0 Jan 19 20:32:40 PENT kernel: Uniform CD-ROM driver unloaded Jan 19 20:32:40 PENT kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled Jan 19 20:32:40 PENT kernel: ttyS00 at 0x03f8 (irq = 4) is a 16450 Jan 19 20:32:40 PENT kernel: ttyS01 at 0x02f8 (irq = 3) is a 16450 Jan 19 20:32:40 PENT kernel: usb.c: registered new driver usbscanner Jan 19 20:32:40 PENT kernel: scanner.c: 0.4.6:USB Scanner Driver Jan 19 20:32:40 PENT kernel: svc: unknown version (3) Jan 19 20:34:07 PENT kernel: Uniform CD-ROM driver Revision: 3.12 Jan 19 20:40:34 PENT kernel: usb.c: USB disconnect on device 1 Jan 19 20:40:34 PENT kernel: usb.c: USB bus 1 deregistered Jan 19 20:42:24 PENT kernel: cdu31a: Trying session 1 Jan 19 20:42:25 PENT kernel: cdu31a: Trying session 2 Jan 19 20:42:26 PENT kernel: VFS: Disk change detected on device cdu31a(15,0) Jan 19 20:42:26 PENT kernel: ISO 9660 Extensions: Microsoft Joliet Level 3 Jan 19 20:42:27 PENT kernel: ISOFS: changing to secondary root Jan 19 20:42:59 PENT kernel: Unable to handle kernel paging request at virtual address c50c4920 Jan 19 20:42:59 PENT kernel: printing eip: Jan 19 20:42:59 PENT kernel: c50a10a5 Jan 19 20:42:59 PENT kernel: *pde = 01159067 Jan 19 20:42:59 PENT kernel: *pte = 00000000 Jan 19 20:42:59 PENT kernel: Oops: 0002 Jan 19 20:42:59 PENT kernel: CPU: 1 Jan 19 20:42:59 PENT kernel: EIP: 0010:[serial:__insmod_serial_S.bss_L3328+58437/95389083] Not tainted Jan 19 20:42:59 PENT kernel: EFLAGS: 00013286 Jan 19 20:42:59 PENT kernel: eax: 00000004 ebx: 0001f800 ecx: fffe1000 edx: 00000232 Jan 19 20:42:59 PENT kernel: esi: 00000000 edi: c50c4920 ebp: c3600000 esp: c4725e60 Jan 19 20:42:59 PENT kernel: ds: 0018 es: 0018 ss: 0018 Jan 19 20:42:59 PENT kernel: Process le (pid: 2681, stackpage=c4725000) Jan 19 20:42:59 PENT kernel: Stack: c4725edc 00000000 c3600000 0001f800 00000000 c50a130d c3600000 0001f800 Jan 19 20:42:59 PENT kernel: 000000fc 00000000 00000000 c4725edc 0000cde8 c4725ed8 000000fc c4724000 Jan 19 20:42:59 PENT kernel: 00000000 00015944 c50a18ea c3600000 0000cde8 000000fc c4725edc c4725ed8 Jan 19 20:42:59 PENT kernel: Call Trace: [serial:__insmod_serial_S.bss_L3328+59053/95388467] [serial:__insmod_serial_S.bss_L3328+60554/95386966] [sys_getresgid+64/144] [generic_unplug_device+45/60] [__run_task_queue+100/112] Jan 19 20:42:59 PENT kernel: [block_sync_page+22/28] [___wait_on_page+105/148] [do_generic_file_read+797/1148] [generic_file_read+126/300] [file_read_actor+0/96] [sys_read+146/260] Jan 19 20:42:59 PENT kernel: [system_call+51/64] Jan 19 20:42:59 PENT kernel: Jan 19 20:42:59 PENT kernel: Code: f3 6c 8b 44 24 20 29 05 c4 4a 0a c5 01 05 70 4c 0a c5 83 3d Jan 19 20:45:00 PENT kernel: <1>Unable to handle kernel paging request at virtual address c84287a8 Jan 19 20:45:00 PENT kernel: printing eip: Jan 19 20:45:00 PENT kernel: c012abb6 Jan 19 20:45:00 PENT kernel: *pde = 00000000 Jan 19 20:45:00 PENT kernel: Oops: 0002 Jan 19 20:45:00 PENT kernel: CPU: 0 Jan 19 20:45:00 PENT kernel: EIP: 0010:[free_block+102/220] Not tainted Jan 19 20:45:00 PENT kernel: EFLAGS: 00013086 Jan 19 20:45:00 PENT kernel: eax: 013899e4 ebx: 00000000 ecx: c3602000 edx: 00000060 Jan 19 20:45:00 PENT kernel: esi: c1126934 edi: 00000055 ebp: c11472a4 esp: c3aa5e78 Jan 19 20:45:00 PENT kernel: ds: 0018 es: 0018 ss: 0018 Jan 19 20:45:00 PENT kernel: Process XF86_S3 (pid: 226, stackpage=c3aa5000) Jan 19 20:45:00 PENT kernel: Stack: c1147000 c3ffbac0 00003286 c3ffbac0 c011cfe8 c3602ee0 c112693c c1126944 Jan 19 20:45:00 PENT kernel: 00000000 c012aefb c1126934 c1147200 0000007e c3ffbac0 c029e4e0 c3ffbb1c Jan 19 20:45:00 PENT kernel: c3ffbac0 c019c67f c1126934 c3ffbac0 c3ffbac0 000000f0 c019c767 c3ffbac0 Jan 19 20:45:00 PENT kernel: Call Trace: [update_process_times+32/148] [kmem_cache_free+83/128] [kfree_skbmem+95/104] [__kfree_skb+223/232] [unix_stream_recvmsg+786/928] Jan 19 20:45:00 PENT kernel: [sock_recvmsg+61/188] [sock_read+132/144] [sys_read+146/260] [system_call+51/64] Jan 19 20:45:00 PENT kernel: Jan 19 20:45:00 PENT kernel: Code: 89 5c 81 18 89 41 14 8b 41 10 8d 50 ff 89 51 10 83 f8 01 75
--------------28FCB2E8AB673287CABC68EB Content-Type: text/plain; charset=us-ascii; name=".config" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename=".config"
# # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_ISA=y # CONFIG_SBUS is not set CONFIG_UID16=y
# # Code maturity level options # CONFIG_EXPERIMENTAL=y
# # Loadable module support # CONFIG_MODULES=y CONFIG_MODVERSIONS=y # CONFIG_KMOD is not set
# # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set CONFIG_M586TSC=y # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_X86_USE_STRING_486=y CONFIG_X86_ALIGNMENT_16=y CONFIG_X86_TSC=y CONFIG_X86_PPRO_FENCE=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set CONFIG_X86_MSR=m CONFIG_X86_CPUID=m CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y CONFIG_SMP=y # CONFIG_MULTIQUAD is not set CONFIG_HAVE_DEC_LOCK=y
# # General setup # CONFIG_NET=y CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_NAMES=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_HOTPLUG is not set # CONFIG_PCMCIA is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_SYSCTL is not set CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set # CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_PM is not set # CONFIG_ACPI is not set # CONFIG_APM is not set
# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set
# # Parallel port support # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_PC_CML1=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_AMIGA is not set # CONFIG_PARPORT_MFC3 is not set # CONFIG_PARPORT_ATARI is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_SUNBPP is not set # CONFIG_PARPORT_OTHER is not set CONFIG_PARPORT_1284=y
# # Plug and Play configuration # # CONFIG_PNP is not set # CONFIG_ISAPNP is not set
# # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_INITRD is not set
# # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # CONFIG_BLK_DEV_MD is not set # CONFIG_MD_LINEAR is not set # CONFIG_MD_RAID0 is not set # CONFIG_MD_RAID1 is not set # CONFIG_MD_RAID5 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_BLK_DEV_LVM is not set
# # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_NETLINK_DEV=y # CONFIG_NETFILTER is not set CONFIG_FILTER=y CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set CONFIG_SYN_COOKIES=y # CONFIG_IPV6 is not set # CONFIG_KHTTPD is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set
# # # # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_LLC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set
# # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set
# # Telephony Support # # CONFIG_PHONE is not set # CONFIG_PHONE_IXJ is not set # CONFIG_PHONE_IXJ_PCMCIA is not set
# # ATA/IDE/MFM/RLL support # CONFIG_IDE=y
# # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y
# # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set # CONFIG_BLK_DEV_IDEDISK_VENDOR is not set # CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set # CONFIG_BLK_DEV_IDEDISK_IBM is not set # CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set # CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set # CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set # CONFIG_BLK_DEV_IDEDISK_WD is not set # CONFIG_BLK_DEV_COMMERIAL is not set # CONFIG_BLK_DEV_TIVO is not set # CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set
# # IDE chipset support/bugfixes # CONFIG_BLK_DEV_CMD640=y CONFIG_BLK_DEV_CMD640_ENHANCED=y # CONFIG_BLK_DEV_ISAPNP is not set CONFIG_BLK_DEV_RZ1000=y # CONFIG_BLK_DEV_IDEPCI is not set # CONFIG_IDE_CHIPSETS is not set # CONFIG_IDEDMA_AUTO is not set # CONFIG_DMA_NONPCI is not set CONFIG_BLK_DEV_IDE_MODES=y # CONFIG_BLK_DEV_ATARAID is not set # CONFIG_BLK_DEV_ATARAID_PDC is not set # CONFIG_BLK_DEV_ATARAID_HPT is not set
# # SCSI support # CONFIG_SCSI=m
# # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=m CONFIG_SD_EXTRA_DEVS=40 # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_SR_EXTRA_DEVS=2 CONFIG_CHR_DEV_SG=m
# # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_DEBUG_QUEUES is not set # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set
# # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set CONFIG_SCSI_AHA152X=m # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_NCR53C7xx is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_NCR53C8XX is not set # CONFIG_SCSI_SYM53C8XX is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_DEBUG is not set
# # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_BOOT is not set # CONFIG_FUSION_ISENSE is not set # CONFIG_FUSION_CTL is not set # CONFIG_FUSION_LAN is not set
# # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set
# # I2O device support # # CONFIG_I2O is not set # CONFIG_I2O_PCI is not set # CONFIG_I2O_BLOCK is not set # CONFIG_I2O_LAN is not set # CONFIG_I2O_SCSI is not set # CONFIG_I2O_PROC is not set
# # Network device support # CONFIG_NETDEVICES=y
# # ARCnet devices # # CONFIG_ARCNET is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_ETHERTAP is not set
# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_SUNLANCE is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNBMAC is not set # CONFIG_SUNQE is not set # CONFIG_SUNGEM is not set CONFIG_NET_VENDOR_3COM=y # CONFIG_EL1 is not set # CONFIG_EL2 is not set # CONFIG_ELPLUS is not set # CONFIG_EL16 is not set CONFIG_EL3=m # CONFIG_3C515 is not set # CONFIG_ELMC is not set # CONFIG_ELMC_II is not set # CONFIG_VORTEX is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set CONFIG_NET_ISA=y # CONFIG_E2100 is not set # CONFIG_EWRK3 is not set # CONFIG_EEXPRESS is not set # CONFIG_EEXPRESS_PRO is not set # CONFIG_HPLAN_PLUS is not set # CONFIG_HPLAN is not set # CONFIG_LP486E is not set # CONFIG_ETH16I is not set CONFIG_NE2000=m # CONFIG_NET_PCI is not set # CONFIG_NET_POCKET is not set
# # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_MYRI_SBUS is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_SK98LIN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set # CONFIG_PPP_FILTER is not set # CONFIG_PPP_ASYNC is not set # CONFIG_PPP_SYNC_TTY is not set # CONFIG_PPP_DEFLATE is not set # CONFIG_PPP_BSDCOMP is not set # CONFIG_PPPOE is not set # CONFIG_SLIP is not set
# # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set
# # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set
# # Wan interfaces # # CONFIG_WAN is not set
# # Amateur Radio support # # CONFIG_HAMRADIO is not set
# # IrDA (infrared) support # # CONFIG_IRDA is not set
# # ISDN subsystem # # CONFIG_ISDN is not set
# # Old CD-ROM drivers (not SCSI, not IDE) # CONFIG_CD_NO_IDESCSI=y # CONFIG_AZTCD is not set # CONFIG_GSCD is not set # CONFIG_SBPCD is not set # CONFIG_MCD is not set # CONFIG_MCDX is not set # CONFIG_OPTCD is not set # CONFIG_CM206 is not set # CONFIG_SJCD is not set # CONFIG_ISP16_CDI is not set CONFIG_CDU31A=m # CONFIG_CDU535 is not set
# # Input core support # # CONFIG_INPUT is not set # CONFIG_INPUT_KEYBDEV is not set # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_EVDEV is not set
# # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=m # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=32 CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set
# # I2C support # # CONFIG_I2C is not set
# # Mice # # CONFIG_BUSMOUSE is not set # CONFIG_MOUSE is not set
# # Joysticks # # CONFIG_INPUT_GAMEPORT is not set
# # Input core support is needed for gameports #
# # Input core support is needed for joysticks # # CONFIG_QIC02_TAPE is not set
# # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_INTEL_RNG is not set # CONFIG_NVRAM is not set CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set
# # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set # CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set
# # Multimedia devices # # CONFIG_VIDEO_DEV is not set
# # File systems # # CONFIG_QUOTA is not set CONFIG_AUTOFS_FS=m # CONFIG_AUTOFS4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_ADFS_FS is not set # CONFIG_ADFS_FS_RW is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_JBD is not set # CONFIG_JBD_DEBUG is not set CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m # CONFIG_UMSDOS_FS is not set CONFIG_VFAT_FS=m # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_TMPFS is not set # CONFIG_RAMFS is not set CONFIG_ISO9660_FS=m CONFIG_JOLIET=y # CONFIG_ZISOFS is not set # CONFIG_MINIX_FS is not set # CONFIG_VXFS_FS is not set CONFIG_NTFS_FS=m CONFIG_NTFS_RW=y CONFIG_HPFS_FS=m CONFIG_PROC_FS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVFS_MOUNT is not set # CONFIG_DEVFS_DEBUG is not set CONFIG_DEVPTS_FS=y # CONFIG_QNX4FS_FS is not set # CONFIG_QNX4FS_RW is not set # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UDF_FS is not set # CONFIG_UDF_RW is not set # CONFIG_UFS_FS is not set # CONFIG_UFS_FS_WRITE is not set
# # Network File Systems # # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_ROOT_NFS is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set CONFIG_SUNRPC=y CONFIG_LOCKD=y CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set CONFIG_NCP_FS=m # CONFIG_NCPFS_PACKET_SIGNING is not set # CONFIG_NCPFS_IOCTL_LOCKING is not set # CONFIG_NCPFS_STRONG is not set # CONFIG_NCPFS_NFS_NS is not set # CONFIG_NCPFS_OS2_NS is not set # CONFIG_NCPFS_SMALLDOS is not set CONFIG_NCPFS_NLS=y # CONFIG_NCPFS_EXTRAS is not set # CONFIG_ZISOFS_FS is not set # CONFIG_ZLIB_FS_INFLATE is not set
# # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_SMB_NLS=y CONFIG_NLS=y
# # Native Language Support # CONFIG_NLS_DEFAULT="cp437" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=m # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set
# # Console drivers # CONFIG_VGA_CONSOLE=y CONFIG_VIDEO_SELECT=y # CONFIG_MDA_CONSOLE is not set
# # Frame-buffer support # # CONFIG_FB is not set
# # Sound # CONFIG_SOUND=m # CONFIG_SOUND_BT878 is not set # CONFIG_SOUND_CMPCI is not set # CONFIG_SOUND_EMU10K1 is not set # CONFIG_MIDI_EMU10K1 is not set # CONFIG_SOUND_FUSION is not set # CONFIG_SOUND_CS4281 is not set # CONFIG_SOUND_ES1370 is not set # CONFIG_SOUND_ES1371 is not set # CONFIG_SOUND_ESSSOLO1 is not set # CONFIG_SOUND_MAESTRO is not set # CONFIG_SOUND_MAESTRO3 is not set # CONFIG_SOUND_ICH is not set # CONFIG_SOUND_RME96XX is not set # CONFIG_SOUND_SONICVIBES is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_VIA82CXXX is not set # CONFIG_MIDI_VIA82CXXX is not set CONFIG_SOUND_OSS=m # CONFIG_SOUND_TRACEINIT is not set # CONFIG_SOUND_DMAP is not set # CONFIG_SOUND_AD1816 is not set # CONFIG_SOUND_SGALAXY is not set # CONFIG_SOUND_ADLIB is not set # CONFIG_SOUND_ACI_MIXER is not set # CONFIG_SOUND_CS4232 is not set # CONFIG_SOUND_SSCAPE is not set # CONFIG_SOUND_GUS is not set # CONFIG_SOUND_VMIDI is not set # CONFIG_SOUND_TRIX is not set # CONFIG_SOUND_MSS is not set # CONFIG_SOUND_MPU401 is not set # CONFIG_SOUND_NM256 is not set # CONFIG_SOUND_MAD16 is not set # CONFIG_SOUND_PAS is not set # CONFIG_PAS_JOYSTICK is not set # CONFIG_SOUND_PSS is not set CONFIG_SOUND_SB=m # CONFIG_SOUND_AWE32_SYNTH is not set # CONFIG_SOUND_WAVEFRONT is not set # CONFIG_SOUND_MAUI is not set # CONFIG_SOUND_YM3812 is not set # CONFIG_SOUND_OPL3SA1 is not set # CONFIG_SOUND_OPL3SA2 is not set # CONFIG_SOUND_YMFPCI is not set # CONFIG_SOUND_YMFPCI_LEGACY is not set CONFIG_SOUND_UART6850=m # CONFIG_SOUND_AEDSP16 is not set # CONFIG_SOUND_TVMIXER is not set
# # USB support # CONFIG_USB=m CONFIG_USB_DEBUG=y
# # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_BANDWIDTH=y CONFIG_USB_LONG_TIMEOUT=y
# # USB Controllers # CONFIG_USB_UHCI=m CONFIG_USB_UHCI_ALT=m CONFIG_USB_OHCI=m
# # USB Device Class drivers # # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH is not set CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set CONFIG_USB_STORAGE_DPCM=y # CONFIG_USB_STORAGE_HP8200e is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set CONFIG_USB_ACM=m # CONFIG_USB_PRINTER is not set
# # USB Human Interface Devices (HID) #
# # Input core support is needed for USB HID #
# # USB Imaging devices # CONFIG_USB_DC2XX=m CONFIG_USB_MDC800=m CONFIG_USB_SCANNER=m # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HPUSBSCSI is not set
# # USB Multimedia devices #
# # Video4Linux support is needed for USB Multimedia device support #
# # USB Network adaptors # # CONFIG_USB_PEGASUS is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_CATC is not set # CONFIG_USB_CDCETHER is not set # CONFIG_USB_USBNET is not set
# # USB port drivers # # CONFIG_USB_USS720 is not set
# # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OMNINET is not set
# # USB Miscellaneous drivers # # CONFIG_USB_RIO500 is not set
# # Bluetooth support # # CONFIG_BLUEZ is not set
# # Kernel hacking # # CONFIG_DEBUG_KERNEL is not set
--------------28FCB2E8AB673287CABC68EB--
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/