Re: Can't burn DVD under 2.5.59 with ide-cd

[Jens Axboe]

On Wed, Jan 22 2003, Joerg Schilling wrote:
> >From [e-mail] Wed Jan 22 09:06:12 2003
> 
> >> >BURN-Free is ON.
> >> >Starting new track at sector: 0
> >> >Track 01:    4 of 4001 MB written (fifo  96%)  16.1x.cdrecord-prodvd: Success. write_g1: scsi sendcmd: no error
> >> >CDB:  2A 00 00 00 08 B8 00 00 1F 00
> >> >status: 0x1 (GOOD STATUS)
> >> >resid: 63488
> >> >cmd finished after 0.008s timeout 100s
> >> 
> >> I can't tell you what happened because the kernel is broken :-(
> >> 
> >> If you fix the kernel, you will get a readble error message,
> 
> >How helpful. How about saying what's broken instead and I'd be happy to
> >fix it.
> 
> I thought it's obvious: It is most likely a problem caused by the broken 
> bit #defines in the Linux kernel for the SCSI status byte. I assume that
> status should be 0x02 instead of 0x01. In addition, I would guess that

Sounds plausible. Patch attached. Anyone care to expand on _why_ these
status bytes are shifted one bit?

===== drivers/ide/ide-cd.c 1.35 vs edited =====
--- 1.35/drivers/ide/ide-cd.c	Thu Nov 21 22:56:59 2002
+++ edited/drivers/ide/ide-cd.c	Wed Jan 22 09:34:28 2003
@@ -706,7 +706,7 @@
 		 * scsi status byte
 		 */
 		if ((rq->flags & REQ_BLOCK_PC) && !rq->errors)
-			rq->errors = CHECK_CONDITION;
+			rq->errors = CHECK_CONDITION << 1;
 
 		/* Check for tray open. */
 		if (sense_key == NOT_READY) {

-- 
Jens Axboe