On Wednesday 22 January 2003 20:07, Srihari Vijayaraghavan wrote:
> ...
> The RAID0 doesn't work in 2.4.21-pre3aa1 in my computer, while it is fine
> with 2.4.21-pre3 and 2.4.20-aa1.
> ...
Ok. I did some more testing, and this is what happens:
/sbin/raidstart /dev/md0 executes and exits fine under 2.4.21-pre3. Where as
under 2.4.21-pre3aa1 it starts executing but _never_ exits (I waited for few
minutes). I had to kill it using alt + sysrq + k.
I have captured the dmesg outputs of both 2.4.21-pre3aa1 and 2.4.21-pre3 and
here is the diff between them:
--- dmesg-2.4.21-pre3aa1 2003-01-23 00:38:11.000000000 +1100
+++ dmesg-2.4.21-pre3 2003-01-23 00:41:11.000000000 +1100
@@ -1,4 +1,4 @@
-Linux version 2.4.21-pre3aa1 (hari@localhost.localdomain) (gcc version 3.2
20020903 (Red Hat Linux 8.0 3.2-7)) #9 Tue Jan 21 23:27:11 EST 2003
+Linux version 2.4.21-pre3 (hari@localhost.localdomain) (gcc version 3.2
20020903 (Red Hat Linux 8.0 3.2-7)) #9 Wed Jan 22 19:28:29 EST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
@@ -12,14 +12,13 @@
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
-Building zonelist for node : 0
Kernel command line: ro root=/dev/hda5 hdb=ide-scsi single
ide_setup: hdb=ide-scsi
Initializing CPU#0
-Detected 1200.072 MHz processor.
+Detected 1200.061 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2392.06 BogoMIPS
-Memory: 516560k/524224k available (955k kernel code, 7276k reserved, 209k
data, 220k init, 0k highmem)
+Memory: 516652k/524224k available (923k kernel code, 7184k reserved, 204k
data, 216k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
@@ -45,9 +44,6 @@
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
-bigpage subsystem: allocated 0 bigpages (=0MB).
-aio_setup: num_physpages = 32764
-aio_setup: sizeof(struct page) = 44
Journalled Block Device driver loaded
pty: 256 Unix98 ptys configured
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
@@ -61,12 +57,12 @@
hda: QUANTUM FIREBALL CX10.2A, ATA DISK drive
hdb: RICOH CD-R/RW MP7083A, ATAPI CD/DVD-ROM drive
hda: DMA disabled
-blk: queue c028ace0, I/O limit 4095Mb (mask 0xffffffff)
+blk: queue c0274460, I/O limit 4095Mb (mask 0xffffffff)
hdb: DMA disabled
hdc: SAMSUNG SV1022D, ATA DISK drive
hdd: Pioneer DVD-ROM ATAPIModel DVD-113 0113, ATAPI CD/DVD-ROM drive
hdc: DMA disabled
-blk: queue c028b144, I/O limit 4095Mb (mask 0xffffffff)
+blk: queue c02748ac, I/O limit 4095Mb (mask 0xffffffff)
hdd: DMA disabled
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
@@ -84,7 +80,7 @@
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
-Freeing unused kernel memory: 220k freed
+Freeing unused kernel memory: 216k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Real Time Clock Driver v1.10e
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
@@ -128,4 +124,5 @@
raid0 : Allocating 8 bytes for hash.
md: updating md0 RAID superblock on device
md: hdc1 [events: 00000193]<6>(write) hdc1's sb offset: 2562240
-SysRq : SAK
+md: hda3 [events: 00000193]<6>(write) hda3's sb offset: 2562240
+md: ... autorun DONE.
It looks though the kernel raid sub-system on 2.4.21-pre3aa1 is not able to
access/activate /dev/hda3 properly, which is part of /dev/md0 raid0 array
(this raid0 array is made up of /dev/hdc1 and /dev/hda3).
Please feel free to ask for more informartion. Thanks.
-- Hari harisri@bigpond.com- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/