--=_courier-19622-1044978340-0001-2
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
On Tue, 11 Feb 2003 14:43:46 +0100, Henrik Persson wrote:
> I know this has been up before, but I couldn't find a solution in the
> archives that would solve my problems..
The patch attached below will definitely solve some of the problems
you're seeing (e.g. "excessive collisions" on a switch). Feedback
welcome. As I've explained in previous postings, the current event
handling is pretty broken.
I have nailed down a number of problems even this patch doesn't fix,
but it's kinda hard to build from there, since testing feedback has been
basically zero. Pretty amazing considering how common Rhine hardware
is. I guess I should write code for NUMA or ia64 instead, _they_ have
testers <g>.
You shouldn't need to force full duplex, btw.
Roger
--=_courier-19622-1044978340-0001-2
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="via-rhine.c-1.15exp1.diff"
--- linux-2.5.52/drivers/net/via-rhine.c.orig Fri Dec 20 20:13:55 2002
+++ linux-2.5.52/drivers/net/via-rhine.c Sat Dec 21 21:09:25 2002
@@ -101,11 +101,14 @@
LK1.1.15 (jgarzik):
- Use new MII lib helper generic_mii_ioctl
+ LK1.1.15exp1 (Roger Luethi):
+ - [...]
+
*/
#define DRV_NAME "via-rhine"
-#define DRV_VERSION "1.1.15"
-#define DRV_RELDATE "November-22-2002"
+#define DRV_VERSION "1.1.15exp1"
+#define DRV_RELDATE "December-21-2002"
/* A few user-configurable values.
@@ -416,29 +419,15 @@ int mmio_verify_registers[] = {
/* Bits in the interrupt status/mask registers. */
enum intr_status_bits {
IntrRxDone=0x0001, IntrRxErr=0x0004, IntrRxEmpty=0x0020,
- IntrTxDone=0x0002, IntrTxError=0x0008, IntrTxUnderrun=0x0010,
+ IntrTxDone=0x0002, IntrTxError=0x0008, IntrTxUnderrun=0x0210,
IntrPCIErr=0x0040,
- IntrStatsMax=0x0080, IntrRxEarly=0x0100, IntrMIIChange=0x0200,
+ IntrStatsMax=0x0080, IntrRxEarly=0x0100,
IntrRxOverflow=0x0400, IntrRxDropped=0x0800, IntrRxNoBuf=0x1000,
IntrTxAborted=0x2000, IntrLinkChange=0x4000,
IntrRxWakeUp=0x8000,
IntrNormalSummary=0x0003, IntrAbnormalSummary=0xC260,
};
-/* MII interface, status flags.
- Not to be confused with the MIIStatus register ... */
-enum mii_status_bits {
- MIICap100T4 = 0x8000,
- MIICap10100HdFd = 0x7800,
- MIIPreambleSupr = 0x0040,
- MIIAutoNegCompleted = 0x0020,
- MIIRemoteFault = 0x0010,
- MIICapAutoNeg = 0x0008,
- MIILink = 0x0004,
- MIIJabber = 0x0002,
- MIIExtended = 0x0001
-};
-
/* The Rx and Tx buffer descriptors. */
struct rx_desc {
s32 rx_status;
@@ -533,30 +522,31 @@ static void via_rhine_set_rx_mode(struct
static struct net_device_stats *via_rhine_get_stats(struct net_device *dev);
static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
static int via_rhine_close(struct net_device *dev);
-static inline void clear_tally_counters(long ioaddr);
-static inline void via_restart_tx(struct net_device *dev);
static void wait_for_reset(struct net_device *dev, int chip_id, char *name)
{
long ioaddr = dev->base_addr;
- int i;
+
+ udelay(5);
+
+ if (readw(ioaddr + ChipCmd) & CmdReset) {
+ printk(KERN_INFO "%s: Reset did not complete in 5 us.\n", name);
+ }
/* VT86C100A may need long delay after reset (dlink) */
if (chip_id == VT86C100A)
udelay(100);
- i = 0;
- do {
- udelay(5);
- i++;
- if(i > 2000) {
- printk(KERN_ERR "%s: reset did not complete in 10 ms.\n", name);
- break;
- }
- } while(readw(ioaddr + ChipCmd) & CmdReset);
+ /* The VT6102 needs to be forced sometimes */
+ if (chip_id == VT6102) {
+ writeb(0x40, ioaddr + 0x81);
+ }
+
+ udelay(5);
+
if (debug > 1)
- printk(KERN_INFO "%s: reset finished after %d microseconds.\n",
- name, 5*i);
+ printk(KERN_INFO "%s: Reset %s.\n", name,
+ (readw(ioaddr + ChipCmd) & CmdReset) ? "failed" : "succeeded");
}
#ifdef USE_MEM
@@ -787,17 +777,17 @@ static int __devinit via_rhine_init_one
int phy, phy_idx = 0;
np->phys[0] = 1; /* Standard for this chip. */
for (phy = 1; phy < 32 && phy_idx < MAX_MII_CNT; phy++) {
- int mii_status = mdio_read(dev, phy, 1);
+ int mii_status = mdio_read(dev, phy, MII_BMSR);
if (mii_status != 0xffff && mii_status != 0x0000) {
np->phys[phy_idx++] = phy;
- np->mii_if.advertising = mdio_read(dev, phy, 4);
+ np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE);
printk(KERN_INFO "%s: MII PHY found at address %d, status "
"0x%4.4x advertising %4.4x Link %4.4x.\n",
dev->name, phy, mii_status, np->mii_if.advertising,
- mdio_read(dev, phy, 5));
+ mdio_read(dev, phy, MII_LPA));
/* set IFF_RUNNING */
- if (mii_status & MIILink)
+ if (mii_status & BMSR_LSTATUS)
netif_carrier_on(dev);
else
netif_carrier_off(dev);
@@ -820,8 +810,8 @@ static int __devinit via_rhine_init_one
(option & 0x220 ? "full" : "half"));
if (np->mii_cnt)
mdio_write(dev, np->phys[0], MII_BMCR,
- ((option & 0x300) ? 0x2000 : 0) | /* 100mbps? */
- ((option & 0x220) ? 0x0100 : 0)); /* Full duplex? */
+ ((option & 0x300) ? BMCR_SPEED100 : 0) | /* 100mbps? */
+ ((option & 0x220) ? BMCR_FULLDPLX : 0)); /* Full duplex? */
}
}
@@ -1021,7 +1011,7 @@ static void init_registers(struct net_de
writew(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow |
IntrRxDropped | IntrRxNoBuf | IntrTxAborted |
IntrTxDone | IntrTxError | IntrTxUnderrun |
- IntrPCIErr | IntrStatsMax | IntrLinkChange | IntrMIIChange,
+ IntrPCIErr | IntrStatsMax | IntrLinkChange,
ioaddr + IntrEnable);
np->chip_cmd = CmdStart|CmdTxOn|CmdRxOn|CmdNoTxPoll;
@@ -1066,10 +1056,10 @@ static void mdio_write(struct net_device
if (phy_id == np->phys[0]) {
switch (regnum) {
case MII_BMCR: /* Is user forcing speed/duplex? */
- if (value & 0x9000) /* Autonegotiation. */
+ if (value & (BMCR_ANENABLE | BMCR_RESET)) /* Autonegotiation. */
np->mii_if.force_media = 0;
else
- np->mii_if.full_duplex = (value & 0x0100) ? 1 : 0;
+ np->mii_if.full_duplex = (value & BMCR_FULLDPLX) ? 1 : 0;
break;
case MII_ADVERTISE:
np->mii_if.advertising = value;
@@ -1175,8 +1165,8 @@ static void via_rhine_timer(unsigned lon
/* make IFF_RUNNING follow the MII status bit "Link established" */
mii_status = mdio_read(dev, np->phys[0], MII_BMSR);
- if ( (mii_status & MIILink) != (np->mii_status & MIILink) ) {
- if (mii_status & MIILink)
+ if ( (mii_status & BMSR_LSTATUS) != (np->mii_status & BMSR_LSTATUS) ) {
+ if (mii_status & BMSR_LSTATUS)
netif_carrier_on(dev);
else
netif_carrier_off(dev);
@@ -1320,7 +1310,7 @@ static void via_rhine_interrupt(int irq,
via_rhine_tx(dev);
/* Abnormal error summary/uncommon events handlers. */
- if (intr_status & (IntrPCIErr | IntrLinkChange | IntrMIIChange |
+ if (intr_status & (IntrPCIErr | IntrLinkChange |
IntrStatsMax | IntrTxError | IntrTxAborted |
IntrTxUnderrun))
via_rhine_error(dev, intr_status);
@@ -1515,7 +1505,7 @@ static void via_rhine_rx(struct net_devi
writew(CmdRxDemand | np->chip_cmd, dev->base_addr + ChipCmd);
}
-static inline void via_restart_tx(struct net_device *dev) {
+static inline void via_rhine_restart_tx(struct net_device *dev) {
struct netdev_private *np = dev->priv;
int entry = np->dirty_tx % TX_RING_SIZE;
@@ -1526,6 +1516,17 @@ static inline void via_restart_tx(struct
writew(CmdTxDemand | np->chip_cmd, dev->base_addr + ChipCmd);
}
+/* Clears the "tally counters" for CRC errors and missed frames(?).
+ It has been reported that some chips need a write of 0 to clear
+ these, for others the counters are set to 1 when written to and
+ instead cleared when read. So we clear them both ways ... */
+static inline void clear_tally_counters(const long ioaddr)
+{
+ writel(0, ioaddr + RxMissed);
+ readw(ioaddr + RxCRCErrs);
+ readw(ioaddr + RxMissed);
+}
+
static void via_rhine_error(struct net_device *dev, int intr_status)
{
struct netdev_private *np = dev->priv;
@@ -1533,7 +1534,7 @@ static void via_rhine_error(struct net_d
spin_lock (&np->lock);
- if (intr_status & (IntrMIIChange | IntrLinkChange)) {
+ if (intr_status & (IntrLinkChange)) {
if (readb(ioaddr + MIIStatus) & 0x02) {
/* Link failed, restart autonegotiation. */
if (np->drv_flags & HasDavicomPhy)
@@ -1551,11 +1552,11 @@ static void via_rhine_error(struct net_d
np->stats.rx_missed_errors += readw(ioaddr + RxMissed);
clear_tally_counters(ioaddr);
}
- if (intr_status & IntrTxError) {
+ if (intr_status & IntrTxAborted) {
if (debug > 1)
printk(KERN_INFO "%s: Abort %4.4x, frame dropped.\n",
dev->name, intr_status);
- via_restart_tx(dev);
+ via_rhine_restart_tx(dev);
}
if (intr_status & IntrTxUnderrun) {
if (np->tx_thresh < 0xE0)
@@ -1564,9 +1565,9 @@ static void via_rhine_error(struct net_d
printk(KERN_INFO "%s: Transmitter underrun, Tx "
"threshold now %2.2x.\n",
dev->name, np->tx_thresh);
- via_restart_tx(dev);
+ via_rhine_restart_tx(dev);
}
- if (intr_status & ~( IntrLinkChange | IntrStatsMax |
+ if (intr_status & ~( IntrLinkChange | IntrStatsMax | IntrTxUnderrun |
IntrTxError | IntrTxAborted | IntrNormalSummary)) {
if (debug > 1)
printk(KERN_ERR "%s: Something Wicked happened! %4.4x.\n",
@@ -1593,17 +1594,6 @@ static struct net_device_stats *via_rhin
return &np->stats;
}
-/* Clears the "tally counters" for CRC errors and missed frames(?).
- It has been reported that some chips need a write of 0 to clear
- these, for others the counters are set to 1 when written to and
- instead cleared when read. So we clear them both ways ... */
-static inline void clear_tally_counters(const long ioaddr)
-{
- writel(0, ioaddr + RxMissed);
- readw(ioaddr + RxCRCErrs);
- readw(ioaddr + RxMissed);
-}
-
static void via_rhine_set_rx_mode(struct net_device *dev)
{
struct netdev_private *np = dev->priv;
--=_courier-19622-1044978340-0001-2--