Re: Oops with bttv in latest bk

[Jan Dittmer]

>>
>>------------[ cut here ]------------
>>kernel BUG at drivers/media/video/bttv-risc.c:742!
> 
> 
> Not reproducable here with latest bttv bits.  Sure you have the latest
> module loaded?  bttv prints the version number at insmod time, should be
> 0.9.6 (vanilla 2.5.65 has 0.9.4 I think) ...
> 
>   Gerd
> 
bttv: driver version 0.9.7 loaded
Would it make sense to try as module? Currently it is compiled in.

Jan

Linux video capture interface: v1.00
bttv: driver version 0.9.7 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Host bridge is VIA Technologies, In VT8363/8365 [KT133/K
bttv: Host bridge is VIA Technologies, In VT82C686 [Apollo Sup
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 2) at 00:0e.0, irq: 5, latency: 32, mmio: 0xeb120000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: BT878(Hauppauge (bt878)) [card=10,autodetected]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
bttv0: Hauppauge eeprom: model=61324, tuner=Philips FI1216 MK2 (5), radio=no
bttv0: using tuner=5
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
msp34xx: init: chip=MSP3410D-B4 +nicam +simple
msp3410: daemon started
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: 
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 
(PV951),ta8874z
tuner: probing bt848 #0 i2c adapter [id=0x10005]
tuner: chip found @ 0xc2
tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
tda9887: probing bt848 #0 i2c adapter [id=0x10005]