[PATCH] i2c i2c-amd756.c: remove some #ifdefs and fix all printk() to use dev_*().
Also some minor whitespace cleanups.
drivers/i2c/busses/i2c-amd756.c | 142 +++++++++++++++++++---------------------
1 files changed, 70 insertions(+), 72 deletions(-)
diff -Nru a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
--- a/drivers/i2c/busses/i2c-amd756.c Thu Mar 20 12:54:12 2003
+++ b/drivers/i2c/busses/i2c-amd756.c Thu Mar 20 12:54:12 2003
@@ -35,6 +35,8 @@
Note: we assume there can only be one device, with one SMBus interface.
*/
+/* #define DEBUG 1 */
+
#include <linux/version.h>
#include <linux/module.h>
#include <linux/pci.h>
@@ -46,44 +48,42 @@
#include <linux/init.h>
#include <asm/io.h>
-#define DRV_NAME "i2c-amd756"
-
/* AMD756 SMBus address offsets */
-#define SMB_ADDR_OFFSET 0xE0
-#define SMB_IOSIZE 16
-#define SMB_GLOBAL_STATUS (0x0 + amd756_ioport)
-#define SMB_GLOBAL_ENABLE (0x2 + amd756_ioport)
-#define SMB_HOST_ADDRESS (0x4 + amd756_ioport)
-#define SMB_HOST_DATA (0x6 + amd756_ioport)
-#define SMB_HOST_COMMAND (0x8 + amd756_ioport)
-#define SMB_HOST_BLOCK_DATA (0x9 + amd756_ioport)
-#define SMB_HAS_DATA (0xA + amd756_ioport)
-#define SMB_HAS_DEVICE_ADDRESS (0xC + amd756_ioport)
-#define SMB_HAS_HOST_ADDRESS (0xE + amd756_ioport)
-#define SMB_SNOOP_ADDRESS (0xF + amd756_ioport)
+#define SMB_ADDR_OFFSET 0xE0
+#define SMB_IOSIZE 16
+#define SMB_GLOBAL_STATUS (0x0 + amd756_ioport)
+#define SMB_GLOBAL_ENABLE (0x2 + amd756_ioport)
+#define SMB_HOST_ADDRESS (0x4 + amd756_ioport)
+#define SMB_HOST_DATA (0x6 + amd756_ioport)
+#define SMB_HOST_COMMAND (0x8 + amd756_ioport)
+#define SMB_HOST_BLOCK_DATA (0x9 + amd756_ioport)
+#define SMB_HAS_DATA (0xA + amd756_ioport)
+#define SMB_HAS_DEVICE_ADDRESS (0xC + amd756_ioport)
+#define SMB_HAS_HOST_ADDRESS (0xE + amd756_ioport)
+#define SMB_SNOOP_ADDRESS (0xF + amd756_ioport)
/* PCI Address Constants */
/* address of I/O space */
-#define SMBBA 0x058 /* mh */
-#define SMBBANFORCE 0x014
+#define SMBBA 0x058 /* mh */
+#define SMBBANFORCE 0x014
/* general configuration */
-#define SMBGCFG 0x041 /* mh */
+#define SMBGCFG 0x041 /* mh */
/* silicon revision code */
-#define SMBREV 0x008
+#define SMBREV 0x008
/* Other settings */
-#define MAX_TIMEOUT 500
+#define MAX_TIMEOUT 500
/* AMD756 constants */
-#define AMD756_QUICK 0x00
-#define AMD756_BYTE 0x01
-#define AMD756_BYTE_DATA 0x02
-#define AMD756_WORD_DATA 0x03
-#define AMD756_PROCESS_CALL 0x04
-#define AMD756_BLOCK_DATA 0x05
+#define AMD756_QUICK 0x00
+#define AMD756_BYTE 0x01
+#define AMD756_BYTE_DATA 0x02
+#define AMD756_WORD_DATA 0x03
+#define AMD756_PROCESS_CALL 0x04
+#define AMD756_BLOCK_DATA 0x05
static unsigned short amd756_ioport = 0;
@@ -101,36 +101,36 @@
schedule_timeout(amount);
}
-#define GS_ABRT_STS (1 << 0)
-#define GS_COL_STS (1 << 1)
-#define GS_PRERR_STS (1 << 2)
-#define GS_HST_STS (1 << 3)
-#define GS_HCYC_STS (1 << 4)
-#define GS_TO_STS (1 << 5)
-#define GS_SMB_STS (1 << 11)
-
-#define GS_CLEAR_STS (GS_ABRT_STS | GS_COL_STS | GS_PRERR_STS | \
- GS_HCYC_STS | GS_TO_STS )
-
-#define GE_CYC_TYPE_MASK (7)
-#define GE_HOST_STC (1 << 3)
-#define GE_ABORT (1 << 5)
+#define GS_ABRT_STS (1 << 0)
+#define GS_COL_STS (1 << 1)
+#define GS_PRERR_STS (1 << 2)
+#define GS_HST_STS (1 << 3)
+#define GS_HCYC_STS (1 << 4)
+#define GS_TO_STS (1 << 5)
+#define GS_SMB_STS (1 << 11)
+
+#define GS_CLEAR_STS (GS_ABRT_STS | GS_COL_STS | GS_PRERR_STS | \
+ GS_HCYC_STS | GS_TO_STS )
+
+#define GE_CYC_TYPE_MASK (7)
+#define GE_HOST_STC (1 << 3)
+#define GE_ABORT (1 << 5)
-static int amd756_transaction(void)
+static int amd756_transaction(struct i2c_adapter *adap)
{
int temp;
int result = 0;
int timeout = 0;
- pr_debug(DRV_NAME
- ": Transaction (pre): GS=%04x, GE=%04x, ADD=%04x, DAT=%04x\n",
- inw_p(SMB_GLOBAL_STATUS), inw_p(SMB_GLOBAL_ENABLE),
- inw_p(SMB_HOST_ADDRESS), inb_p(SMB_HOST_DATA));
+ dev_dbg(&adap->dev, ": Transaction (pre): GS=%04x, GE=%04x, ADD=%04x, "
+ "DAT=%04x\n", inw_p(SMB_GLOBAL_STATUS),
+ inw_p(SMB_GLOBAL_ENABLE), inw_p(SMB_HOST_ADDRESS),
+ inb_p(SMB_HOST_DATA));
/* Make sure the SMBus host is ready to start transmitting */
if ((temp = inw_p(SMB_GLOBAL_STATUS)) & (GS_HST_STS | GS_SMB_STS)) {
- pr_debug(DRV_NAME ": SMBus busy (%04x). Waiting... \n", temp);
+ dev_dbg(&adap->dev, ": SMBus busy (%04x). Waiting... \n", temp);
do {
amd756_do_pause(1);
temp = inw_p(SMB_GLOBAL_STATUS);
@@ -138,7 +138,7 @@
(timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
if (timeout >= MAX_TIMEOUT) {
- pr_debug(DRV_NAME ": Busy wait timeout (%04x)\n", temp);
+ dev_dbg(&adap->dev, ": Busy wait timeout (%04x)\n", temp);
goto abort;
}
timeout = 0;
@@ -155,46 +155,46 @@
/* If the SMBus is still busy, we give up */
if (timeout >= MAX_TIMEOUT) {
- pr_debug(DRV_NAME ": Completion timeout!\n");
+ dev_dbg(&adap->dev, ": Completion timeout!\n");
goto abort;
}
if (temp & GS_PRERR_STS) {
result = -1;
- pr_debug(DRV_NAME ": SMBus Protocol error (no response)!\n");
+ dev_dbg(&adap->dev, ": SMBus Protocol error (no response)!\n");
}
if (temp & GS_COL_STS) {
result = -1;
- printk(KERN_WARNING DRV_NAME " SMBus collision!\n");
+ dev_warn(&adap->dev, " SMBus collision!\n");
}
if (temp & GS_TO_STS) {
result = -1;
- pr_debug(DRV_NAME ": SMBus protocol timeout!\n");
+ dev_dbg(&adap->dev, ": SMBus protocol timeout!\n");
}
if (temp & GS_HCYC_STS)
- pr_debug(DRV_NAME " SMBus protocol success!\n");
+ dev_dbg(&adap->dev, " SMBus protocol success!\n");
outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS);
#ifdef DEBUG
if (((temp = inw_p(SMB_GLOBAL_STATUS)) & GS_CLEAR_STS) != 0x00) {
- pr_debug(DRV_NAME
- ": Failed reset at end of transaction (%04x)\n", temp);
+ dev_dbg(&adap->dev,
+ ": Failed reset at end of transaction (%04x)\n", temp);
}
-
- pr_debug(DRV_NAME
- ": Transaction (post): GS=%04x, GE=%04x, ADD=%04x, DAT=%04x\n",
- inw_p(SMB_GLOBAL_STATUS), inw_p(SMB_GLOBAL_ENABLE),
- inw_p(SMB_HOST_ADDRESS), inb_p(SMB_HOST_DATA));
#endif
+ dev_dbg(&adap->dev,
+ ": Transaction (post): GS=%04x, GE=%04x, ADD=%04x, DAT=%04x\n",
+ inw_p(SMB_GLOBAL_STATUS), inw_p(SMB_GLOBAL_ENABLE),
+ inw_p(SMB_HOST_ADDRESS), inb_p(SMB_HOST_DATA));
+
return result;
abort:
- printk(KERN_WARNING DRV_NAME ": Sending abort.\n");
+ dev_warn(&adap->dev, ": Sending abort.\n");
outw_p(inw(SMB_GLOBAL_ENABLE) | GE_ABORT, SMB_GLOBAL_ENABLE);
amd756_do_pause(100);
outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS);
@@ -211,7 +211,7 @@
/** TODO: Should I supporte the 10-bit transfers? */
switch (size) {
case I2C_SMBUS_PROC_CALL:
- pr_debug(DRV_NAME ": I2C_SMBUS_PROC_CALL not supported!\n");
+ dev_dbg(&adap->dev, ": I2C_SMBUS_PROC_CALL not supported!\n");
/* TODO: Well... It is supported, I'm just not sure what to do here... */
return -1;
case I2C_SMBUS_QUICK:
@@ -266,7 +266,7 @@
/* How about enabling interrupts... */
outw_p(size & GE_CYC_TYPE_MASK, SMB_GLOBAL_ENABLE);
- if (amd756_transaction()) /* Error in transaction */
+ if (amd756_transaction(adap)) /* Error in transaction */
return -1;
if ((read_write == I2C_SMBUS_WRITE) || (size == AMD756_QUICK))
@@ -334,7 +334,7 @@
u8 temp;
if (amd756_ioport) {
- printk(KERN_ERR DRV_NAME ": Only one device supported. "
+ dev_err(&pdev->dev, ": Only one device supported. "
"(you have a strange motherboard, btw..)\n");
return -ENODEV;
}
@@ -351,8 +351,8 @@
pci_read_config_byte(pdev, SMBGCFG, &temp);
if ((temp & 128) == 0) {
- printk(KERN_ERR DRV_NAME
- ": Error: SMBus controller I/O not enabled!\n");
+ dev_err(&pdev->dev,
+ ": Error: SMBus controller I/O not enabled!\n");
return -ENODEV;
}
@@ -364,16 +364,14 @@
}
if (!request_region(amd756_ioport, SMB_IOSIZE, "amd756-smbus")) {
- printk(KERN_ERR DRV_NAME
- ": SMB region 0x%x already in use!\n", amd756_ioport);
+ dev_err(&pdev->dev, ": SMB region 0x%x already in use!\n",
+ amd756_ioport);
return -ENODEV;
}
-#ifdef DEBUG
pci_read_config_byte(pdev, SMBREV, &temp);
- printk(KERN_DEBUG DRV_NAME ": SMBREV = 0x%X\n", temp);
- printk(KERN_DEBUG DRV_NAME ": AMD756_smba = 0x%X\n", amd756_ioport);
-#endif
+ dev_dbg(&pdev->dev, ": SMBREV = 0x%X\n", temp);
+ dev_dbg(&pdev->dev, ": AMD756_smba = 0x%X\n", amd756_ioport);
/* set up the driverfs linkage to our parent device */
amd756_adapter.dev.parent = &pdev->dev;
@@ -383,8 +381,8 @@
error = i2c_add_adapter(&amd756_adapter);
if (error) {
- printk(KERN_ERR DRV_NAME
- ": Adapter registration failed, module not inserted.\n");
+ dev_err(&pdev->dev,
+ ": Adapter registration failed, module not inserted.\n");
goto out_err;
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/