Re: 2.5.65-ac2 -- hda/ide trouble on ICH4

[Jan Dittmer]

Alan Cox wrote:
> On Sat, 2003-03-22 at 16:25, Dominik Brodowski wrote:
> 
>>>Where is the lock, what does the NMI oopser show ?
>>
>>The lock is directly "below" that line -- and the NMI oopser isn't
>>triggered, AFAICT
> 
> 
> Anything useful off right-alt scroll-lock etc ?
> 
I'm seeing the same problem. VIA KT133A platform, nothing after 
partition detection.  No NMI-Watchdog, no sysrq magic. Just dead.
Any patch particular I could try to revert?

Jan

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
ide0: BM-DMA at 0x9000-0x9007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x9008-0x900f, BIOS settings: hdc:DMA, hdd:DMA
hda: IC35L060AVV207-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: SONY CD-RW CRX175E2, ATAPI CD/DVD-ROM drive
hdd: Pioneer DVD-ROM ATAPIModel DVD-104S 012, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 120103200 sectors (61493 MB) w/1821KiB Cache, CHS=7476/255/63, 
UDMA(100)
  /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 >