--=_courier-25058-1048983829-0001-2
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable
Hi all,=20
I wanted to test 2.5 kernels, but i have to say that i have no clue
about the current status of the drivers that use.
I checked dmesg to see what info it gave me and it just pushes loads of
error messages as seen below.... The only thing i have on that scsi
interface is two cdroms (one of which is a cd writer).
Is this known? Any information you guys want/need?
lspci:
00:0b.0 SCSI storage controller: Adaptec AHA-7850 (rev 03)
driver:
CONFIG_SCSI_AIC7XXX=3Dy
driver options:
CONFIG_AIC7XXX_CMDS_PER_DEVICE=3D8
CONFIG_AIC7XXX_RESET_DELAY_MS=3D15000
CONFIG_AIC7XXX_DEBUG_ENABLE=3Dy (shouldn't print all this data if it
wasn't important imho.)
CONFIG_AIC7XXX_DEBUG_MASK=3D0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=3Dy
dmesg is filled with:
scsi0: PCI error Interrupt at seqaddr =3D 0x7
scsi0: Data Parity Error Detected during address or write data phase
scsi0: PCI error Interrupt at seqaddr =3D 0x9
scsi0: Data Parity Error Detected during address or write data phase
CC since i don't think i could handle subscribing to this ml =3D)
--=20
Ian Kumlien <pomac@vapor.com>
--=_courier-25058-1048983829-0001-2
Content-Type: application/pgp-signature; name="signature.asc"
Content-Transfer-Encoding: 7bit
Content-Description: This is a digitally signed message part
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.7 (GNU/Linux)
iD8DBQA+hjgw7F3Euyc51N8RAiuVAJ4zXvorZCsm4XDcT3fxWeWpfyWdbgCfeajS
IZkAx9drUXYlHpTtJYhYTEE=
=uBV2
-----END PGP SIGNATURE-----
--=_courier-25058-1048983829-0001-2--