Re: 3c59x gives HWaddr FF:FF:...

[Felipe Alfaro Solana]

On Sun, 2003-03-30 at 04:21, Juan Quintela wrote:
> In my experience, that bug is related with acpi.  In a kernel compiled
> without acpi, the card works perfectly, in a kernel compiled with acpi
> it depend on the phase of the moon and similar things :(

I'm not using ACPI but APM and, on a vanilla 2.4.20 kernel, that's what
I'm seeing with my 3CCFE575CT on my kernel dmesg ring:

<snip>
Yenta IRQ list 08d8, PCI irq5
Socket status: 30000020
Yenta IRQ list 08d8, PCI irq10
Socket status: 30000006
cs: cb_alloc(bus 6): vendor 0x10b7, device 0x5257
PCI: Failed to allocate resource 0(1000-2c3) for 06:00.0
PCI: Enabling device 06:00.0 (0000 -> 0003)
<snip>
eth0: command 0x5800 did not complete! Status=0xffff
eth0: command 0x2804 did not complete! Status=0xffff
<snip>

However, Alan Cox patches for 2.4.20 and Red Hat's linux kernel both
seem to work OK... I think it's related to PCI resource assignment.

________________________________________________________________________
        Felipe Alfaro Solana
   Linux Registered User #287198
http://counter.li.org