Re: 2.5.69 - atempt to run on sony vaio picture book

Grzegorz Jaskiewicz (gj@pointblue.com.pl)
06 May 2003 00:55:58 +0100

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Keith Mannthey: "[RFC][PATCH] fix for clusterd io_apics"
Previous message: Grzegorz Jaskiewicz: "2.5.69 - atempt to run on sony vaio picture book"
In reply to: Grzegorz Jaskiewicz: "2.5.69 - atempt to run on sony vaio picture book"

This is a MIME-formatted message. If you see this text it means that your
E-mail software does not support MIME-formatted messages.

--=_courier-25665-1052179379-0001-2
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 7bit

On Tue, 2003-05-06 at 00:41, Grzegorz Jaskiewicz wrote:
> whole bzipped syslog should be best descryption on how many things have
> failed/not working/hanging computer.
> it is 73 kB long, so i will not attach it. Please download it from:
>
> http://gj.pointblue.com.pl/syslog.log.bz2
it is 17k now, there was binary rubish in middle of it - reiserfs..

when card is in pcmcia port (yenta) kernel freezes on boot. This card is
dlink something - tulip.ko.

using cisco airo_cs - kernel hangs when enabling key for wifi interface:

iwconfig eth0 key s:jakisklucz

so it is completly useless on my laptop at the moment :/

lspci -vvv is attached, tell me if you need more information.

Cheers.

-- 
Grzegorz Jaskiewicz <gj@pointblue.com.pl>
K4 labs

--=_courier-25665-1052179379-0001-2
Content-Type: text/plain; charset=iso-8859-2
Content-Transfer-Encoding: 7bit
Content-Description: 
Content-Disposition: inline; filename=vaio.lspci

00:00.0 Host bridge: Transmeta Corporation LongRun Northbridge
	Subsystem: Transmeta Corporation: Unknown device 0295
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0
	Region 0: Memory at fc100000 (32-bit, non-prefetchable) [size=1M]

00:00.1 RAM memory: Transmeta Corporation SDRAM controller
	Subsystem: Transmeta Corporation: Unknown device 0295
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:00.2 RAM memory: Transmeta Corporation BIOS scratchpad
	Subsystem: Transmeta Corporation: Unknown device 0295
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Region 4: I/O ports at 1090 [size=16]

00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Interrupt: pin D routed to IRQ 9
	Region 4: I/O ports at 1060 [size=32]

00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin ? routed to IRQ 9

00:08.0 FireWire (IEEE 1394): Texas Instruments TSB43AA22 IEEE-1394 Controller (PHY/Link Integrated) (rev 02) (prog-if 10 [OHCI])
	Subsystem: Sony Corporation: Unknown device 80b2
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 9
	Region 0: Memory at fc00d000 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at fc008000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:09.0 Multimedia audio controller: Yamaha Corporation YMF-754 [DS-1E Audio Controller]
	Subsystem: Sony Corporation: Unknown device 80b0
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 64 (1250ns min, 6250ns max)
	Interrupt: pin A routed to IRQ 9
	Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=32K]
	Region 1: I/O ports at 1000 [size=64]
	Region 2: I/O ports at 1080 [size=4]
	Capabilities: [50] Power Management version 1
		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0b.0 Multimedia controller: Kawasaki Steel Corporation: Unknown device ff01 (rev 01)
	Subsystem: Sony Corporation: Unknown device 80b4
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (750ns min, 1500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 9
	Region 0: Memory at fc00d800 (32-bit, non-prefetchable) [size=512]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0c.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 80)
	Subsystem: Sony Corporation: Unknown device 80b1
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168
	Interrupt: pin A routed to IRQ 9
	Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=01, subordinate=04, sec-latency=176
	Memory window 0: 10400000-107ff000 (prefetchable)
	Memory window 1: 10800000-10bff000
	I/O window 0: 00004000-000040ff
	I/O window 1: 00004400-000044ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
	16-bit legacy interface ports at 0001

00:0d.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M (rev 64) (prog-if 00 [VGA])
	Subsystem: Sony Corporation: Unknown device 80af
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 66 (2000ns min), cache line size 08
	Interrupt: pin A routed to IRQ 9
	Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: I/O ports at 1400 [size=256]
	Region 2: Memory at fc00c000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [5c] Power Management version 1
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 Ethernet controller: Abocom Systems Inc ADMtek Centaur-C rev 17 [D-Link DFE-680TX] CardBus Fast Ethernet Adapter (rev 11)
	Subsystem: D-Link System Inc: Unknown device 1541
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (63750ns min, 63750ns max)
	Interrupt: pin A routed to IRQ 9
	Region 0: I/O ports at 4000 [size=256]
	Region 1: Memory at 10800000 (32-bit, non-prefetchable) [size=1K]
	Expansion ROM at 10400000 [size=128K]
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-


--=_courier-25665-1052179379-0001-2--

Next message: Keith Mannthey: "[RFC][PATCH] fix for clusterd io_apics"
Previous message: Grzegorz Jaskiewicz: "2.5.69 - atempt to run on sony vaio picture book"
In reply to: Grzegorz Jaskiewicz: "2.5.69 - atempt to run on sony vaio picture book"