2.5.69+bk: "irq 15: nobody cared!" on a Compaq Armada 1592DT

Alex Riesen (alexander.riesen@synopsys.COM)
Tue, 13 May 2003 15:49:07 +0200


Hi!

(Zwane, I saw you fixing a similar bug in xircom, so included
you in cc also. Maybe you have an idea what could I try first?)

This occured just after starting pcmcia, when booted with a
card already in slot and cable connected to it.
The traces didn't stop until i removed the card
(i tried to disconnect the cable first, which didn't help).

-alex

$ lsmod
Module Size Used by
pcnet_cs 16100 1
8390 8384 1 pcnet_cs
crc32 3744 1 8390
ds 11616 3 pcnet_cs
yenta_socket 14240 2
pcmcia_core 53888 3 pcnet_cs,ds,yenta_socket
soundcore 6560 0

$ lspci | grep CardBus
00:11.0 CardBus bridge: Texas Instruments PCI1131 (rev 01)
00:11.1 CardBus bridge: Texas Instruments PCI1131 (rev 01)

$ grep PCMCIA .config
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
# PCMCIA/CardBus support
CONFIG_PCMCIA=m
CONFIG_PCMCIA_PROBE=y
# CONFIG_PARPORT_PC_PCMCIA is not set
# PCMCIA SCSI adapter support
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# PCMCIA network device support
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
# CONFIG_PCMCIA_AXNET is not set
# PCMCIA character devices

Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Found IRQ 15 for device 00:11.0
irq 15: nobody cared!
Call Trace:
[<c010a8fb>] handle_IRQ_event+0x7b/0xf0
[<c010ab39>] do_IRQ+0xa9/0x150
[<c01093a8>] common_interrupt+0x18/0x20
[<c01a4355>] pci_bus_write_config_word+0x55/0x70
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a1eeb1>] yenta_probe_irq+0xb1/0x120 [yenta_socket]
[<c6a1ed60>] yenta_interrupt+0x0/0x60 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a1ef49>] yenta_get_socket_capabilities+0x29/0x50 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a1fa6e>] yenta_open+0x12e/0x180 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a20ff4>] +0x94/0x840 [yenta_socket]
[<c6a1e316>] add_pci_socket+0xa6/0xe0 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a20bc0>] pci_cardbus_driver+0x0/0xa0 [yenta_socket]
[<c6a1e391>] cardbus_probe+0x31/0x40 [yenta_socket]
[<c6a20e40>] yenta_operations+0x0/0x40 [yenta_socket]
[<c01a7555>] pci_device_probe+0x45/0x60
[<c6a20b80>] cardbus_table+0x0/0x40 [yenta_socket]
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c01cf675>] bus_match+0x35/0x60
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c01cf768>] driver_attach+0x58/0x60
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c6a20c10>] pci_cardbus_driver+0x50/0xa0 [yenta_socket]
[<c01cf9f6>] bus_add_driver+0x96/0xb0
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c6a20e80>] +0x0/0xe0 [yenta_socket]
[<c01cfe1f>] driver_register+0x2f/0x40
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c01a765e>] pci_register_driver+0x3e/0x50
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c6a1200d>] +0xd/0x11 [yenta_socket]
[<c6a20bc0>] pci_cardbus_driver+0x0/0xa0 [yenta_socket]
[<c012f015>] sys_init_module+0x135/0x280
[<c0109187>] syscall_call+0x7/0xb

handlers:
[<c6a1ed60>] (yenta_interrupt+0x0/0x60 [yenta_socket])
irq 15: nobody cared!
Call Trace:
[<c010a8fb>] handle_IRQ_event+0x7b/0xf0
[<c010ab39>] do_IRQ+0xa9/0x150
[<c01093a8>] common_interrupt+0x18/0x20
[<c011e827>] do_softirq+0x47/0xb0
[<c010abb5>] do_IRQ+0x125/0x150
[<c01093a8>] common_interrupt+0x18/0x20
[<c01a4355>] pci_bus_write_config_word+0x55/0x70
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a1eeb1>] yenta_probe_irq+0xb1/0x120 [yenta_socket]
[<c6a1ed60>] yenta_interrupt+0x0/0x60 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a1ef49>] yenta_get_socket_capabilities+0x29/0x50 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a1fa6e>] yenta_open+0x12e/0x180 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a20ff4>] +0x94/0x840 [yenta_socket]
[<c6a1e316>] add_pci_socket+0xa6/0xe0 [yenta_socket]
[<c6a20f60>] +0x0/0x840 [yenta_socket]
[<c6a20bc0>] pci_cardbus_driver+0x0/0xa0 [yenta_socket]
[<c6a1e391>] cardbus_probe+0x31/0x40 [yenta_socket]
[<c6a20e40>] yenta_operations+0x0/0x40 [yenta_socket]
[<c01a7555>] pci_device_probe+0x45/0x60
[<c6a20b80>] cardbus_table+0x0/0x40 [yenta_socket]
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c01cf675>] bus_match+0x35/0x60
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c01cf768>] driver_attach+0x58/0x60
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c6a20c10>] pci_cardbus_driver+0x50/0xa0 [yenta_socket]
[<c01cf9f6>] bus_add_driver+0x96/0xb0
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c6a20e80>] +0x0/0xe0 [yenta_socket]
[<c01cfe1f>] driver_register+0x2f/0x40
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c01a765e>] pci_register_driver+0x3e/0x50
[<c6a20be8>] pci_cardbus_driver+0x28/0xa0 [yenta_socket]
[<c6a1200d>] +0xd/0x11 [yenta_socket]
[<c6a20bc0>] pci_cardbus_driver+0x0/0xa0 [yenta_socket]
[<c012f015>] sys_init_module+0x135/0x280
[<c0109187>] syscall_call+0x7/0xb

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/