Re: 2.5.70 and 2.5.70-mm3 hang on bootup

[John Stoffel]

Martin> On Tue, 2003-06-03 at 15:58, John Stoffel wrote:
>> Thanks for all the help, my initial thoughts that APIC was the root of
>> my problem was wrong, it was all ACPI issues.  Maybe we should put in
>> a note in the Kconfig help entries for people to disable ACPI if they
>> enable SMP and/or UP APIC options?
>> 

Martin> Both my previous board (Asus P4T533-C with 850E chipset) and
Martin> current one (Asus P4C800 with 875P chipset) works fine with
Martin> ACPI, APIC, and IO-APIC enabled ....

You have much newer chipsets that I do, I have a 440GX board.  My
suggestion for the note in Kconfig is merely that if your system hangs
after printing just a couple of lines on bootup, try disabling ACPI in
your kernel.

I probably wasn't clear enough.

John