Can you try latest 2.4-ac kernel. That has a patch to enable systems with more than 8 logical cpus. With that kernel, you should be able to boot with HT and without "noapic".
Thanks,
-Venki
> -----Original Message-----
> From: Bruno Cornec [mailto:Bruno.Cornec@hp.com]
> Sent: Tuesday, June 17, 2003 10:25 AM
> To: linux-kernel@vger.kernel.org
> Cc: sophie.pasquier@hp.com; bruno.cornec@hp.com
> Subject: PROBLEM: DL760 G2 issue on 2.4.21 with Hyper-Threading
>
>
> Hello,
>
> First this is my first mail on that mailing-list so even if I
> try reading
> all the guidelines before posting, I may have missed some, as I'm not
> reading it regularly but only through kernel-traffic.
> [So please keep the Cc: if you answer to that mail]
>
> PROBLEM: DL760 G2 issue on 2.4.21 with Hyper-Threading (HT)
>
> When activating HT on the machine in the BIOS, the system
> boots correctly
> as it seems (detecting the 16 CPUs it should detect) but then
> it hangs
> during the remaining phases of the boot (before launching the
> X session
> generally). Whatever the runlevel (S, 2, 3, 4), results is the same.
> The base distribution is SLES 8. So I tried first their kernel
> (k_smp-2.4.19-113), then their updated kernel (k_smp-2.4.19-257), then
> a RedHat kernel (2.4.20-18.9bigmem), then a std 2.4.21
> kernel, with always
> the same result, soon or less a hang. No other messages at
> the console.
>
> The same machines with the same kernels without HT enabled in
> BIOS works
> like a charm.
>
> Tests were made initialy with 24 GB of RAM, then with 4 GB of
> RAM, just
> to be in a safe conf.
>
> Here are some more precise info:
>
> --------------------------------------------------------------------
> The latest BIOS has been put on the system (P44 - 2003-02-18)
> --------------------------------------------------------------------
> cat /proc/cmdline :
> root=/dev/cciss/c0d0p1 ide=nodma apm=off acpi=off (8 CPUs)
> root=/dev/cciss/c0d0p1 ide=nodma apm=off acpi=off noapic (16 CPUs)
>
> The noapic option seems mandatory as the system does a kernel panic
> without it in HT mode due to errors in IO-APIC.
>
> --------------------------------------------------------------------
> cat /proc/cpuinfo (8 CPUs) :
>
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 15
> model : 2
> model name : Intel(R) XEON(TM) MP CPU 2.00GHz
> stepping : 2
> cpu MHz : 1999.320
> cache size : 512 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep
> mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse
> sse2 ss ht tm
> bogomips : 3984.58
>
> processor : 1
> vendor_id : GenuineIntel
> cpu family : 15
> model : 2
> model name : Intel(R) XEON(TM) MP CPU 2.00GHz
> stepping : 2
> cpu MHz : 1999.320
> cache size : 512 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep
> mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse
> sse2 ss ht tm
> bogomips : 3997.69
>
> processor : 2
> vendor_id : GenuineIntel
> cpu family : 15
> model : 2
> model name : Intel(R) XEON(TM) MP CPU 2.00GHz
> stepping : 2
> cpu MHz : 1999.320
> cache size : 512 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep
> mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse
> sse2 ss ht tm
> bogomips : 3997.69
>
> processor : 3
> vendor_id : GenuineIntel
> cpu family : 15
> model : 2
> model name : Intel(R) XEON(TM) MP CPU 2.00GHz
> stepping : 2
> cpu MHz : 1999.320
> cache size : 512 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep
> mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse
> sse2 ss ht tm
> bogomips : 3997.69
>
> processor : 4
> vendor_id : GenuineIntel
> cpu family : 15
> model : 2
> model name : Intel(R) XEON(TM) MP CPU 2.00GHz
> stepping : 2
> cpu MHz : 1999.320
> cache size : 512 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep
> mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse
> sse2 ss ht tm
> bogomips : 3997.69
>
> processor : 5
> vendor_id : GenuineIntel
> cpu family : 15
> model : 2
> model name : Intel(R) XEON(TM) MP CPU 2.00GHz
> stepping : 2
> cpu MHz : 1999.320
> cache size : 512 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep
> mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse
> sse2 ss ht tm
> bogomips : 3997.69
>
> processor : 6
> vendor_id : GenuineIntel
> cpu family : 15
> model : 2
> model name : Intel(R) XEON(TM) MP CPU 2.00GHz
> stepping : 2
> cpu MHz : 1999.320
> cache size : 512 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep
> mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse
> sse2 ss ht tm
> bogomips : 3997.69
>
> processor : 7
> vendor_id : GenuineIntel
> cpu family : 15
> model : 2
> model name : Intel(R) XEON(TM) MP CPU 2.00GHz
> stepping : 2
> cpu MHz : 1999.320
> cache size : 512 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep
> mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse
> sse2 ss ht tm
> bogomips : 3997.69
>
> --------------------------------------------------------------------
> boot.log (8 CPU - without noapic )
>
> Inspecting /boot/System.map
> Loaded 18066 symbols from /boot/System.map.
> Symbols match kernel version 2.4.21.
> No module symbols loaded.
> klogd 1.4.1, log source = ksyslog started.
> <4>Linux version 2.4.21 (root@linux) (gcc version 3.2) #3 SMP
> Tue Jun 17 17:32:56 CEST 2003
> <6>BIOS-provided physical RAM map:
> <4> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> <4> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> <4> BIOS-e820: 0000000000100000 - 00000000efff0000 (usable)
> <4> BIOS-e820: 00000000efff0000 - 00000000f0000000 (ACPI data)
> <4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> <4> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> <4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> <4> BIOS-e820: 0000000100000000 - 000000010ffff000 (usable)
> <5>3455MB HIGHMEM available.
> <5>896MB LOWMEM available.
> <4>found SMP MP-table at 000f4fd0
> <4>hm, page 000f4000 reserved twice.
> <4>hm, page 000f5000 reserved twice.
> <4>hm, page 000f7000 reserved twice.
> <4>hm, page 000f8000 reserved twice.
> <4>On node 0 totalpages: 1114111
> <4>zone(0): 4096 pages.
> <4>zone(1): 225280 pages.
> <4>zone(2): 884735 pages.
> <6>ACPI: Searched entire block, no RSDP was found.
> <6>ACPI: RSDP located at physical address c00f4f70
> <6>RSD PTR v0 [HP ]
> <4>__va_range(0xefff0000, 0x68): idx=8 mapped at ffff6000
> <6>ACPI table found: RSDT v1 [HP P44 0.1]
> <4>__va_range(0xefff0040, 0x24): idx=8 mapped at ffff6000
> <4>__va_range(0xefff0040, 0x74): idx=8 mapped at ffff6000
> <6>ACPI table found: FACP v1 [HP P44 0.1]
> <4>__va_range(0xefff0100, 0x24): idx=8 mapped at ffff6000
> <4>__va_range(0xefff0100, 0xe0): idx=8 mapped at ffff6000
> <6>ACPI table found: APIC v1 [HP P44 0.1]
> <4>__va_range(0xefff0100, 0xe0): idx=8 mapped at ffff6000
> <6>LAPIC (acpi_id[0x0001] id[0x0] enabled[1])
> <6>CPU 0 (0x0000) enabledProcessor #0 Pentium 4(tm) XEON(tm)
> APIC version 16
> <4>
> <6>LAPIC (acpi_id[0x0002] id[0x2] enabled[1])
> <6>CPU 1 (0x0200) enabledProcessor #2 Pentium 4(tm) XEON(tm)
> APIC version 16
> <4>
> <6>LAPIC (acpi_id[0x0003] id[0x4] enabled[1])
> <6>CPU 2 (0x0400) enabledProcessor #4 Pentium 4(tm) XEON(tm)
> APIC version 16
> <4>
> <6>LAPIC (acpi_id[0x0004] id[0x6] enabled[1])
> <6>CPU 3 (0x0600) enabledProcessor #6 Pentium 4(tm) XEON(tm)
> APIC version 16
> <4>
> <6>LAPIC (acpi_id[0x0005] id[0x8] enabled[1])
> <6>CPU 4 (0x0800) enabledProcessor #8 Pentium 4(tm) XEON(tm)
> APIC version 16
> <4>
> <6>LAPIC (acpi_id[0x0006] id[0xa] enabled[1])
> <6>CPU 5 (0x0a00) enabledProcessor #10 Pentium 4(tm) XEON(tm)
> APIC version 16
> <4>
> <6>LAPIC (acpi_id[0x0007] id[0xc] enabled[1])
> <6>CPU 6 (0x0c00) enabledProcessor #12 Pentium 4(tm) XEON(tm)
> APIC version 16
> <4>
> <6>LAPIC (acpi_id[0x0008] id[0xe] enabled[1])
> <6>CPU 7 (0x0e00) enabledProcessor #14 Pentium 4(tm) XEON(tm)
> APIC version 16
> <4>
> <6>LAPIC (acpi_id[0x0009] id[0x1] enabled[0])
> <6>CPU 8 (0x0100) disabled
> <6>LAPIC (acpi_id[0x000a] id[0x3] enabled[0])
> <6>CPU 9 (0x0300) disabled
> <6>LAPIC (acpi_id[0x000b] id[0x5] enabled[0])
> <6>CPU 10 (0x0500) disabled
> <6>LAPIC (acpi_id[0x000c] id[0x7] enabled[0])
> <6>CPU 11 (0x0700) disabled
> <6>LAPIC (acpi_id[0x000d] id[0x9] enabled[0])
> <6>CPU 12 (0x0900) disabled
> <6>LAPIC (acpi_id[0x000e] id[0xb] enabled[0])
> <6>CPU 13 (0x0b00) disabled
> <6>LAPIC (acpi_id[0x000f] id[0xd] enabled[0])
> <6>CPU 14 (0x0d00) disabled
> <6>LAPIC (acpi_id[0x0010] id[0xf] enabled[0])
> <6>CPU 15 (0x0f00) disabled
> <6>IOAPIC (id[0x8] address[0xfec00000] global_irq_base[0x0])
> <6>IOAPIC (id[0x9] address[0xfec01000] global_irq_base[0x10])
> <6>IOAPIC (id[0xa] address[0xfec02000] global_irq_base[0x20])
> <6>INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x1]
> trigger[0x1])
> <6>LAPIC_NMI (acpi_id[0x00ff] polarity[0x0] trigger[0x0] lint[0x1])
> <6>16 CPUs total
> <6>Local APIC address fee00000
> <4>__va_range(0xefff01e0, 0x24): idx=8 mapped at ffff6000
> <4>__va_range(0xefff01e0, 0x58): idx=8 mapped at ffff6000
> <6>ACPI table found: SRAT v1 [HP P44 0.3]
> <4>__va_range(0xefff0238, 0x24): idx=8 mapped at ffff6000
> <4>__va_range(0xefff0238, 0x50): idx=8 mapped at ffff6000
> <6>ACPI table found: SPCR v1 [HP P44 0.1]
> <4>__va_range(0xefff8000, 0x24): idx=8 mapped at ffff6000
> <4>__va_range(0xefff8000, 0x4fae): idx=8 mapped at ffff6000
> <6>ACPI table found: SSDT v1 [HP P44 0.2]
> <4>Enabling the CPU's according to the ACPI table
> <4>Intel MultiProcessor Specification v1.4
> <4> Virtual Wire compatibility mode.
> <4>OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000
> <4>I/O APIC #8 Version 17 at 0xFEC00000.
> <4>I/O APIC #9 Version 17 at 0xFEC01000.
> <4>I/O APIC #10 Version 17 at 0xFEC02000.
> <4>Enabling APIC mode: Flat. Using 3 I/O APICs
> <4>Processors: 8
> <4>Kernel command line: root=/dev/cciss/c0d0p1 ide=nodma
> apm=off acpi=off
> <6>ide_setup: ide=nodma : Prevented DMA
> <6>Initializing CPU#0
> <4>Detected 1999.320 MHz processor.
> <4>Console: colour VGA+ 80x25
> <4>Calibrating delay loop... 3984.58 BogoMIPS
> <6>Memory: 4138352k/4456444k available (1594k kernel code,
> 55496k reserved, 397k data, 500k init, 3276732k highmem)
> <6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
> <6>Inode cache hash table entries: 262144 (order: 9, 2097152 bytes)
> <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
> <4>Buffer-cache hash table entries: 524288 (order: 9, 2097152 bytes)
> <4>Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
> <6>CPU: Trace cache: 12K uops, L1 D cache: 8K
> <6>CPU: L2 cache: 512K
> <6>CPU: L3 cache: 2048K
> <6>CPU: Hyper-Threading is disabled
> <6>Intel machine check architecture supported.
> <6>Intel machine check reporting enabled on CPU#0.
> <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
> <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
> <6>Enabling fast FPU save and restore... done.
> <6>Enabling unmasked SIMD FPU exception support... done.
> <6>Checking 'hlt' instruction... OK.
> <4>POSIX conformance testing by UNIFIX
> <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
> <4>mtrr: detected mtrr type: Intel
> <6>CPU: Trace cache: 12K uops, L1 D cache: 8K
> <6>CPU: L2 cache: 512K
> <6>CPU: L3 cache: 2048K
> <6>CPU: Hyper-Threading is disabled
> <6>Intel machine check reporting enabled on CPU#0.
> <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
> <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
> <4>CPU0: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
> <4>per-CPU timeslice cutoff: 1462.74 usecs.
> <4>enabled ExtINT on CPU#0
> <4>ESR value before enabling vector: 00000000
> <4>ESR value after enabling vector: 00000000
> <4>Booting processor 1/2 eip 2000
> <6>Initializing CPU#1
> <4>masked ExtINT on CPU#1
> <4>ESR value before enabling vector: 00000000
> <4>ESR value after enabling vector: 00000000
> <4>Calibrating delay loop... 3997.69 BogoMIPS
> <6>CPU: Trace cache: 12K uops, L1 D cache: 8K
> <6>CPU: L2 cache: 512K
> <6>CPU: L3 cache: 2048K
> <6>CPU: Hyper-Threading is disabled
> <6>Intel machine check reporting enabled on CPU#1.
> <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
> <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
> <4>CPU1: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
> <4>Booting processor 2/4 eip 2000
> <6>Initializing CPU#2
> <4>masked ExtINT on CPU#2
> <4>ESR value before enabling vector: 00000000
> <4>ESR value after enabling vector: 00000000
> <4>Calibrating delay loop... 3997.69 BogoMIPS
> <6>CPU: Trace cache: 12K uops, L1 D cache: 8K
> <6>CPU: L2 cache: 512K
> <6>CPU: L3 cache: 2048K
> <6>CPU: Hyper-Threading is disabled
> <6>Intel machine check reporting enabled on CPU#2.
> <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
> <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
> <4>CPU2: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
> <4>Booting processor 3/6 eip 2000
> <6>Initializing CPU#3
> <4>masked ExtINT on CPU#3
> <4>ESR value before enabling vector: 00000000
> <4>ESR value after enabling vector: 00000000
> <4>Calibrating delay loop... 3997.69 BogoMIPS
> <6>CPU: Trace cache: 12K uops, L1 D cache: 8K
> <6>CPU: L2 cache: 512K
> <6>CPU: L3 cache: 2048K
> <6>CPU: Hyper-Threading is disabled
> <6>Intel machine check reporting enabled on CPU#3.
> <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
> <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
> <4>CPU3: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
> <4>Booting processor 4/8 eip 2000
> <6>Initializing CPU#4
> <4>masked ExtINT on CPU#4
> <4>ESR value before enabling vector: 00000000
> <4>ESR value after enabling vector: 00000000
> <4>Calibrating delay loop... 3997.69 BogoMIPS
> <6>CPU: Trace cache: 12K uops, L1 D cache: 8K
> <6>CPU: L2 cache: 512K
> <6>CPU: L3 cache: 2048K
> <6>CPU: Hyper-Threading is disabled
> <6>Intel machine check reporting enabled on CPU#4.
> <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
> <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
> <4>CPU4: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
> <4>Booting processor 5/10 eip 2000
> <6>Initializing CPU#5
> <4>masked ExtINT on CPU#5
> <4>ESR value before enabling vector: 00000000
> <4>ESR value after enabling vector: 00000000
> <4>Calibrating delay loop... 3997.69 BogoMIPS
> <6>CPU: Trace cache: 12K uops, L1 D cache: 8K
> <6>CPU: L2 cache: 512K
> <6>CPU: L3 cache: 2048K
> <6>CPU: Hyper-Threading is disabled
> <6>Intel machine check reporting enabled on CPU#5.
> <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
> <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
> <4>CPU5: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
> <4>Booting processor 6/12 eip 2000
> <6>Initializing CPU#6
> <4>masked ExtINT on CPU#6
> <4>ESR value before enabling vector: 00000000
> <4>ESR value after enabling vector: 00000000
> <4>Calibrating delay loop... 3997.69 BogoMIPS
> <6>CPU: Trace cache: 12K uops, L1 D cache: 8K
> <6>CPU: L2 cache: 512K
> <6>CPU: L3 cache: 2048K
> <6>CPU: Hyper-Threading is disabled
> <6>Intel machine check reporting enabled on CPU#6.
> <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
> <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
> <4>CPU6: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
> <4>Booting processor 7/14 eip 2000
> <6>Initializing CPU#7
> <4>masked ExtINT on CPU#7
> <4>ESR value before enabling vector: 00000000
> <4>ESR value after enabling vector: 00000000
> <4>Calibrating delay loop... 3997.69 BogoMIPS
> <6>CPU: Trace cache: 12K uops, L1 D cache: 8K
> <6>CPU: L2 cache: 512K
> <6>CPU: L3 cache: 2048K
> <6>CPU: Hyper-Threading is disabled
> <6>Intel machine check reporting enabled on CPU#7.
> <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
> <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
> <4>CPU7: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
> <6>Total of 8 processors activated (31968.46 BogoMIPS).
> <4>ENABLING IO-APIC IRQs
> <3>BIOS bug, IO-APIC#0 ID 8 is already used!...
> <3>... fixing up to 1. (tell your hw vendor)
> <6>...changing IO-APIC physical APIC ID to 1 ... ok.
> <4>Setting 9 in the phys_id_present_map
> <6>...changing IO-APIC physical APIC ID to 9 ... ok.
> <3>BIOS bug, IO-APIC#2 ID 10 is already used!...
> <3>... fixing up to 3. (tell your hw vendor)
> <6>...changing IO-APIC physical APIC ID to 3 ... ok.
> <7>init IO_APIC IRQs
> <7> IO-APIC (apicid-pin) 1-0, 1-3, 1-5, 1-7, 1-11, 3-1, 3-2,
> 3-4 not connected.
> <6>..TIMER: vector=0x31 pin1=2 pin2=0
> <7>number of MP IRQ sources: 68.
> <7>number of IO-APIC #1 registers: 16.
> <7>number of IO-APIC #9 registers: 16.
> <7>number of IO-APIC #3 registers: 16.
> <6>testing the IO APIC.......................
> <4>
> <7>IO APIC #1......
> <7>.... register #00: 01000000
> <7>....... : physical APIC id: 01
> <7>....... : Delivery Type: 0
> <7>....... : LTS : 0
> <7>.... register #01: 000F0011
> <7>....... : max redirection entries: 000F
> <7>....... : PRQ implemented: 0
> <7>....... : IO APIC version: 0011
> <7>.... register #02: 01000000
> <7>....... : arbitration: 01
> <7>.... IRQ redirection table:
> <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
> <7> 00 000 00 1 0 0 0 0 0 0 00
> <7> 01 0FF 0F 0 0 0 0 0 1 1 39
> <7> 02 0FF 0F 0 0 0 0 0 1 1 31
> <7> 03 000 00 1 0 0 0 0 0 0 00
> <7> 04 0FF 0F 0 0 0 0 0 1 1 41
> <7> 05 000 00 1 0 0 0 0 0 0 00
> <7> 06 0FF 0F 0 0 0 0 0 1 1 49
> <7> 07 000 00 1 0 0 0 0 0 0 00
> <7> 08 0FF 0F 0 0 0 0 0 1 1 51
> <7> 09 0FF 0F 1 1 0 1 0 1 1 59
> <7> 0a 0FF 0F 1 1 0 1 0 1 1 61
> <7> 0b 000 00 1 0 0 0 0 0 0 00
> <7> 0c 0FF 0F 0 0 0 0 0 1 1 69
> <7> 0d 0FF 0F 1 1 0 1 0 1 1 71
> <7> 0e 0FF 0F 0 0 0 0 0 1 1 79
> <7> 0f 0FF 0F 0 0 0 0 0 1 1 81
> <4>
> <7>IO APIC #9......
> <7>.... register #00: 09000000
> <7>....... : physical APIC id: 09
> <7>....... : Delivery Type: 0
> <7>....... : LTS : 0
> <7>.... register #01: 000F0011
> <7>....... : max redirection entries: 000F
> <7>....... : PRQ implemented: 0
> <7>....... : IO APIC version: 0011
> <7>.... register #02: 09000000
> <7>....... : arbitration: 09
> <7>.... IRQ redirection table:
> <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
> <7> 00 0FF 0F 1 1 0 1 0 1 1 89
> <7> 01 0FF 0F 1 1 0 1 0 1 1 91
> <7> 02 0FF 0F 1 1 0 1 0 1 1 99
> <7> 03 0FF 0F 1 1 0 1 0 1 1 A1
> <7> 04 0FF 0F 1 1 0 1 0 1 1 A9
> <7> 05 0FF 0F 1 1 0 1 0 1 1 B1
> <7> 06 0FF 0F 1 1 0 1 0 1 1 B9
> <7> 07 0FF 0F 1 1 0 1 0 1 1 C1
> <7> 08 0FF 0F 1 1 0 1 0 1 1 C9
> <7> 09 0FF 0F 1 1 0 1 0 1 1 D1
> <7> 0a 0FF 0F 1 1 0 1 0 1 1 D9
> <7> 0b 0FF 0F 1 1 0 1 0 1 1 E1
> <7> 0c 0FF 0F 1 1 0 1 0 1 1 E9
> <7> 0d 0FF 0F 1 1 0 1 0 1 1 32
> <7> 0e 0FF 0F 1 1 0 1 0 1 1 3A
> <7> 0f 0FF 0F 1 1 0 1 0 1 1 42
> <4>
> <7>IO APIC #3......
> <7>.... register #00: 03000000
> <7>....... : physical APIC id: 03
> <7>....... : Delivery Type: 0
> <7>....... : LTS : 0
> <7>.... register #01: 000F0011
> <7>....... : max redirection entries: 000F
> <7>....... : PRQ implemented: 0
> <7>....... : IO APIC version: 0011
> <7>.... register #02: 03000000
> <7>....... : arbitration: 03
> <7>.... IRQ redirection table:
> <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
> <7> 00 0FF 0F 1 1 0 1 0 1 1 4A
> <7> 01 000 00 1 0 0 0 0 0 0 00
> <7> 02 000 00 1 0 0 0 0 0 0 00
> <7> 03 0FF 0F 1 1 0 1 0 1 1 52
> <7> 04 000 00 1 0 0 0 0 0 0 00
> <7> 05 0FF 0F 1 1 0 1 0 1 1 5A
> <7> 06 0FF 0F 1 1 0 1 0 1 1 62
> <7> 07 0FF 0F 1 1 0 1 0 1 1 6A
> <7> 08 0FF 0F 1 1 0 1 0 1 1 72
> <7> 09 0FF 0F 1 1 0 1 0 1 1 7A
> <7> 0a 0FF 0F 1 1 0 1 0 1 1 82
> <7> 0b 0FF 0F 1 1 0 1 0 1 1 8A
> <7> 0c 0FF 0F 1 1 0 1 0 1 1 92
> <7> 0d 0FF 0F 1 1 0 1 0 1 1 9A
> <7> 0e 0FF 0F 1 1 0 1 0 1 1 A2
> <7> 0f 0FF 0F 1 1 0 1 0 1 1 AA
> <7>IRQ to pin mappings:
> <7>IRQ0 -> 0:2
> <7>IRQ1 -> 0:1
> <7>IRQ4 -> 0:4
> <7>IRQ6 -> 0:6
> <7>IRQ8 -> 0:8
> <7>IRQ9 -> 0:9
> <7>IRQ10 -> 0:10
> <7>IRQ12 -> 0:12
> <7>IRQ13 -> 0:13
> <7>IRQ14 -> 0:14
> <7>IRQ15 -> 0:15
> <7>IRQ16 -> 1:0
> <7>IRQ17 -> 1:1
> <7>IRQ18 -> 1:2
> <7>IRQ19 -> 1:3
> <7>IRQ20 -> 1:4
> <7>IRQ21 -> 1:5
> <7>IRQ22 -> 1:6
> <7>IRQ23 -> 1:7
> <7>IRQ24 -> 1:8
> <7>IRQ25 -> 1:9
> <7>IRQ26 -> 1:10
> <7>IRQ27 -> 1:11
> <7>IRQ28 -> 1:12
> <7>IRQ29 -> 1:13
> <7>IRQ30 -> 1:14
> <7>IRQ31 -> 1:15
> <7>IRQ32 -> 2:0
> <7>IRQ35 -> 2:3
> <7>IRQ37 -> 2:5
> <7>IRQ38 -> 2:6
> <7>IRQ39 -> 2:7
> <7>IRQ40 -> 2:8
> <7>IRQ41 -> 2:9
> <7>IRQ42 -> 2:10
> <7>IRQ43 -> 2:11
> <7>IRQ44 -> 2:12
> <7>IRQ45 -> 2:13
> <7>IRQ46 -> 2:14
> <7>IRQ47 -> 2:15
> <6>.................................... done.
> <4>Using local APIC timer interrupts.
> <4>calibrating APIC timer ...
> <4>..... CPU clock speed is 1999.2879 MHz.
> <4>..... host bus clock speed is 99.9641 MHz.
> <4>cpu: 0, clocks: 999641, slice: 111071
> <4>CPU0<T0:999632,T1:888560,D:1,S:111071,C:999641>
> <4>cpu: 2, clocks: 999641, slice: 111071
> <4>cpu: 3, clocks: 999641, slice: 111071
> <4>cpu: 1, clocks: 999641, slice: 111071
> <4>cpu: 7, clocks: 999641, slice: 111071
> <4>cpu: 4, clocks: 999641, slice: 111071
> <4>cpu: 6, clocks: 999641, slice: 111071
> <4>cpu: 5, clocks: 999641, slice: 111071
> <4>CPU1<T0:999632,T1:777488,D:2,S:111071,C:999641>
> <4>CPU2<T0:999632,T1:666416,D:3,S:111071,C:999641>
> <4>CPU3<T0:999632,T1:555344,D:4,S:111071,C:999641>
> <4>CPU5<T0:999632,T1:333200,D:6,S:111071,C:999641>
> <4>CPU4<T0:999632,T1:444272,D:5,S:111071,C:999641>
> <4>CPU6<T0:999632,T1:222128,D:7,S:111071,C:999641>
> <4>CPU7<T0:999632,T1:111056,D:8,S:111071,C:999641>
> <4>checking TSC synchronization across CPUs:
> <4>BIOS BUG: CPU#0 improperly initialized, has -2 usecs TSC
> skew! FIXED.
> <4>BIOS BUG: CPU#2 improperly initialized, has -2 usecs TSC
> skew! FIXED.
> <4>BIOS BUG: CPU#3 improperly initialized, has 4 usecs TSC
> skew! FIXED.
> <4>BIOS BUG: CPU#6 improperly initialized, has 2 usecs TSC
> skew! FIXED.
> <4>Waiting on wait_init_idle (map = 0xfe)
> <4>All processors have done init_idle
> <6>PCI: PCI BIOS revision 2.10 entry at 0xf1135, last bus=22
> <6>PCI: Using configuration type 1
> <6>PCI: Probing PCI hardware
> <6>PCI: Ignoring BAR0-3 of IDE controller 00:0f.1
> <6>PCI: Discovered primary peer bus 03 [IRQ]
> <6>PCI: Discovered primary peer bus 07 [IRQ]
> <6>PCI: Discovered primary peer bus 0b [IRQ]
> <6>PCI: Discovered primary peer bus 0f [IRQ]
> <6>PCI: Discovered primary peer bus 13 [IRQ]
> <6>PCI->APIC IRQ transform: (B0,I12,P0) -> 37
> <6>PCI->APIC IRQ transform: (B0,I13,P0) -> 41
> <6>PCI->APIC IRQ transform: (B0,I14,P0) -> 40
> <6>PCI->APIC IRQ transform: (B0,I15,P0) -> 10
> <6>PCI->APIC IRQ transform: (B0,I16,P0) -> 39
> <6>PCI->APIC IRQ transform: (B0,I16,P1) -> 32
> <6>PCI->APIC IRQ transform: (B0,I16,P2) -> 38
> <6>PCI->APIC IRQ transform: (B0,I30,P0) -> 35
> <6>PCI->APIC IRQ transform: (B3,I2,P0) -> 43
> <6>PCI->APIC IRQ transform: (B3,I30,P0) -> 35
> <6>PCI->APIC IRQ transform: (B7,I30,P0) -> 35
> <6>PCI->APIC IRQ transform: (B11,I30,P0) -> 35
> <6>PCI->APIC IRQ transform: (B15,I30,P0) -> 35
> <6>PCI->APIC IRQ transform: (B19,I30,P0) -> 35
> <4>PCI: Device 00:78 not found by BIOS
> <4>PCI: Device 00:7b not found by BIOS
> <4>PCI: Device 00:b8 not found by BIOS
> <4>PCI: Device 00:c0 not found by BIOS
> <4>PCI: Device 00:c2 not found by BIOS
> <4>PCI: Device 00:c4 not found by BIOS
> <4>PCI: Device 00:c6 not found by BIOS
> <4>PCI: Device 00:c8 not found by BIOS
> <4>PCI: Device 00:ca not found by BIOS
> <6>Linux NET4.0 for Linux 2.4
> <6>Based upon Swansea University Computer Society NET3.039
> <4>Initializing RT netlink socket
> <4>Starting kswapd
> <4>allocated 32 pages and 32 bhs reserved for the highmem bounces
> <6>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> <4>pty: 256 Unix98 ptys configured
> <6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS
> SHARE_IRQ SERIAL_PCI enabled
> <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
> <6>Floppy drive(s): fd0 is 1.44M
> <6>FDC 0 is a National Semiconductor PC87306
> <6>loop: loaded (max 8 devices)
> <6>HP CISS Driver (v 2.4.42)
> <7>cciss: Device 0xb178 has been found at bus 0 dev 14 func 0
> <4>cciss: using DAC cycles
> <6> blocks= 35553120 block_size= 512
> <6> heads= 255, sectors= 32, cylinders= 4357 RAID 1(0+1)
> <4>
> <6> blocks= 35553120 block_size= 512
> <6> heads= 255, sectors= 32, cylinders= 4357 RAID 1(0+1)
> <4>
> <4>blk: queue c03d1000, I/O limit 4294967295Mb (mask
> 0xffffffffffffffff)
> <6>Partition check:
> <6> cciss/c0d0: p1 p2 p3 p4 < p5 p6 >
> <6> cciss/c0d1: p1
> <6>tg3.c:v1.5 (March 21, 2003)
> <6>eth0: Tigon3 [partno(284685-003) rev 0105 PHY(5701)]
> (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:0b:cd:52:3d:68
> <6>bonding.c:v2.4.20-20030320 (March 20, 2003)
> <3>bonding_init(): either miimon or arp_interval and
> arp_ip_target module parameters must be specified, otherwise
> bonding will not detect link failures! see bonding.txt for details.
> <6>bond0 registered without MII link monitoring, in load
> balancing (round-robin) mode.
> <6>bond0 registered without ARP monitoring
> <6>Linux agpgart interface v0.99 (c) Jeff Hartmann
> <6>agpgart: Maximum main memory to use for agp memory: 203M
> <7>agpgart: no supported devices found.
> <6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
> <6>ide: Assuming 33MHz system bus speed for PIO modes;
> override with idebus=xx
> <6>SvrWks CSB5: IDE controller at PCI slot 00:0f.1
> <6>SvrWks CSB5: chipset revision 147
> <6>SvrWks CSB5: not 100%% native mode: will probe irqs later
> <6>SvrWks CSB5: simplex device: DMA forced
> <6> ide0: BM-DMA at 0x2820-0x2827, BIOS settings: hda:pio, hdb:pio
> <6>SvrWks CSB5: simplex device: DMA forced
> <6> ide1: BM-DMA at 0x2828-0x282f, BIOS settings: hdc:pio, hdd:pio
> <4>hda: COMPAQ CD-ROM SN-124, ATAPI CD/DVD-ROM drive
> <4>hda: set_drive_speed_status: status=0x51 { DriveReady
> SeekComplete Error }
> <4>hda: set_drive_speed_status: error=0x04
> <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> <4>hda: attached ide-cdrom driver.
> <6>hda: ATAPI 24X CD-ROM drive, 128kB Cache
> <6>Uniform CD-ROM driver Revision: 3.12
> <6>SCSI subsystem driver Revision: 1.00
> <3>kmod: failed to exec /sbin/modprobe -s -k
> scsi_hostadapter, errno = 2
> <3>kmod: failed to exec /sbin/modprobe -s -k
> scsi_hostadapter, errno = 2
> <6>NET4: Linux TCP/IP 1.0 for NET4.0
> <6>IP Protocols: ICMP, UDP, TCP, IGMP
> <6>IP: routing cache hash table of 65536 buckets, 512Kbytes
> <6>TCP: Hash tables configured (established 262144 bind 65536)
> <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> <4>reiserfs: checking transaction log (device 68:01) ...
> <4>reiserfs: replayed 6 transactions in 0 seconds
> <4>Using r5 hash to sort names
> <4>ReiserFS version 3.6.25
> <4>VFS: Mounted root (reiserfs filesystem) readonly.
> <6>Freeing unused kernel memory: 500k freed
> <6>Adding Swap: 2097136k swap-space (priority 42)
> <4>reiserfs: checking transaction log (device 68:11) ...
> <4>Using r5 hash to sort names
> <4>ReiserFS version 3.6.25
> <4>reiserfs: checking transaction log (device 68:06) ...
> <4>reiserfs: replayed 3 transactions in 0 seconds
> <4>Using r5 hash to sort names
> <4>ReiserFS version 3.6.25
> <4>reiserfs: checking transaction log (device 68:02) ...
> <4>reiserfs: replayed 5 transactions in 0 seconds
> <4>Using r5 hash to sort names
> <4>ReiserFS version 3.6.25
> <4>reiserfs: checking transaction log (device 68:03) ...
> <4>reiserfs: replayed 3 transactions in 0 seconds
> <4>Using r5 hash to sort names
> <4>ReiserFS version 3.6.25
>
> --------------------------------------------------------------------
> Of course I've seen the messages:
> <3>BIOS bug, IO-APIC#0 ID 8 is already used!...
> <3>... fixing up to 1. (tell your hw vendor)
>
> This is where without noapic the system hangs in HT mode.
> are they better solutions to allow HT to work than noapic ?
>
> --------------------------------------------------------------------
> boot.log (8 CPU - with noapic which is the potion used for HT)
>
> Inspecting /boot/System.map
> Loaded 18066 symbols from /boot/System.map.
> Symbols match kernel version 2.4.21.
> No module symbols loaded.
> klogd 1.4.1, log source = ksyslog started.
> <4>Linux version 2.4.21 (root@linux) (gcc version 3.2) #3 SMP
> Tue Jun 17 17:32:56 CEST 2003
> <6>BIOS-provided physical RAM map:
> <4> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> <4> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> <4> BIOS-e820: 0000000000100000 - 00000000efff0000 (usable)
> <4> BIOS-e820: 00000000efff0000 - 00000000f0000000 (ACPI data)
> <4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> <4> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> <4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> <4> BIOS-e820: 0000000100000000 - 000000010ffff000 (usable)
> <5>3455MB HIGHMEM available.
> <5>896MB LOWMEM available.
> <4>found SMP MP-table at 000f4fd0
> <4>hm, page 000f4000 reserved twice.
> <4>hm, page 000f5000 reserved twice.
> <4>hm, page 000f7000 reserved twice.
> <4>hm, page 000f8000 reserved twice.
> <4>On node 0 totalpages: 1114111
> <4>zone(0): 4096 pages.
> <4>zone(1): 225280 pages.
> <4>zone(2): 884735 pages.
> <6>ACPI: Searched entire block, no RSDP was found.
> <6>ACPI: RSDP located at physical address c00f4f70
> <6>RSD PTR v0 [HP ]
> <4>__va_range(0xefff0000, 0x68): idx=8 mapped at ffff6000
> <6>ACPI table found: RSDT v1 [HP P44 0.1]
> <4>__va_range(0xefff0040, 0x24): idx=8 mapped at ffff6000
> <4>__va_range(0xefff0040, 0x74): idx=8 mapped at ffff6000
> <6>ACPI table found: FACP v1 [HP P44 0.1]
> <4>__va_range(0xefff0100, 0x24): idx=8 mapped at ffff6000
> <4>__va_range(0xefff0100, 0xe0): idx=8 mapped at ffff6000
> <6>ACPI table found: APIC v1 [HP P44 0.1]
> <4>__va_range(0xefff0100, 0xe0): idx=8 mapped at ffff6000
> <6>LAPIC (acpi_id[0x0001] id[0x0] enabled[1])
> <6>CPU 0 (0x0000) enabledProcessor #0 Pentium 4(tm) XEON(tm)
> APIC version 16
> <4>
> <6>LAPIC (acpi_id[0x0002] id[0x2] enabled[1])
> <6>CPU 1 (0x0200) enabledProcessor #2 Pentium 4(tm) XEON(tm)
> APIC version 16
> <4>
> <6>LAPIC (acpi_id[0x0003] id[0x4] enabled[1])
> <6>CPU 2 (0x0400) enabledProcessor #4 Pentium 4(tm) XEON(tm)
> APIC version 16
> <4>
> <6>LAPIC (acpi_id[0x0004] id[0x6] enabled[1])
> <6>CPU 3 (0x0600) enabledProcessor #6 Pentium 4(tm) XEON(tm)
> APIC version 16
> <4>
> <6>LAPIC (acpi_id[0x0005] id[0x8] enabled[1])
> <6>CPU 4 (0x0800) enabledProcessor #8 Pentium 4(tm) XEON(tm)
> APIC version 16
> <4>
> <6>LAPIC (acpi_id[0x0006] id[0xa] enabled[1])
> <6>CPU 5 (0x0a00) enabledProcessor #10 Pentium 4(tm) XEON(tm)
> APIC version 16
> <4>
> <6>LAPIC (acpi_id[0x0007] id[0xc] enabled[1])
> <6>CPU 6 (0x0c00) enabledProcessor #12 Pentium 4(tm) XEON(tm)
> APIC version 16
> <4>
> <6>LAPIC (acpi_id[0x0008] id[0xe] enabled[1])
> <6>CPU 7 (0x0e00) enabledProcessor #14 Pentium 4(tm) XEON(tm)
> APIC version 16
> <4>
> <6>LAPIC (acpi_id[0x0009] id[0x1] enabled[0])
> <6>CPU 8 (0x0100) disabled
> <6>LAPIC (acpi_id[0x000a] id[0x3] enabled[0])
> <6>CPU 9 (0x0300) disabled
> <6>LAPIC (acpi_id[0x000b] id[0x5] enabled[0])
> <6>CPU 10 (0x0500) disabled
> <6>LAPIC (acpi_id[0x000c] id[0x7] enabled[0])
> <6>CPU 11 (0x0700) disabled
> <6>LAPIC (acpi_id[0x000d] id[0x9] enabled[0])
> <6>CPU 12 (0x0900) disabled
> <6>LAPIC (acpi_id[0x000e] id[0xb] enabled[0])
> <6>CPU 13 (0x0b00) disabled
> <6>LAPIC (acpi_id[0x000f] id[0xd] enabled[0])
> <6>CPU 14 (0x0d00) disabled
> <6>LAPIC (acpi_id[0x0010] id[0xf] enabled[0])
> <6>CPU 15 (0x0f00) disabled
> <6>IOAPIC (id[0x8] address[0xfec00000] global_irq_base[0x0])
> <6>IOAPIC (id[0x9] address[0xfec01000] global_irq_base[0x10])
> <6>IOAPIC (id[0xa] address[0xfec02000] global_irq_base[0x20])
> <6>INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x1]
> trigger[0x1])
> <6>LAPIC_NMI (acpi_id[0x00ff] polarity[0x0] trigger[0x0] lint[0x1])
> <6>16 CPUs total
> <6>Local APIC address fee00000
> <4>__va_range(0xefff01e0, 0x24): idx=8 mapped at ffff6000
> <4>__va_range(0xefff01e0, 0x58): idx=8 mapped at ffff6000
> <6>ACPI table found: SRAT v1 [HP P44 0.3]
> <4>__va_range(0xefff0238, 0x24): idx=8 mapped at ffff6000
> <4>__va_range(0xefff0238, 0x50): idx=8 mapped at ffff6000
> <6>ACPI table found: SPCR v1 [HP P44 0.1]
> <4>__va_range(0xefff8000, 0x24): idx=8 mapped at ffff6000
> <4>__va_range(0xefff8000, 0x4fae): idx=8 mapped at ffff6000
> <6>ACPI table found: SSDT v1 [HP P44 0.2]
> <4>Enabling the CPU's according to the ACPI table
> <4>Intel MultiProcessor Specification v1.4
> <4> Virtual Wire compatibility mode.
> <4>OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000
> <4>I/O APIC #8 Version 17 at 0xFEC00000.
> <4>I/O APIC #9 Version 17 at 0xFEC01000.
> <4>I/O APIC #10 Version 17 at 0xFEC02000.
> <4>Enabling APIC mode: Flat. Using 3 I/O APICs
> <4>Processors: 8
> <4>Kernel command line: root=/dev/cciss/c0d0p1 ide=nodma
> apm=off acpi=off noapic
> <6>ide_setup: ide=nodma : Prevented DMA
> <6>Initializing CPU#0
> <4>Detected 1999.339 MHz processor.
> <4>Console: colour VGA+ 80x25
> <4>Calibrating delay loop... 3984.58 BogoMIPS
> <6>Memory: 4138352k/4456444k available (1594k kernel code,
> 55496k reserved, 397k data, 500k init, 3276732k highmem)
> <6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
> <6>Inode cache hash table entries: 262144 (order: 9, 2097152 bytes)
> <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
> <4>Buffer-cache hash table entries: 524288 (order: 9, 2097152 bytes)
> <4>Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
> <6>CPU: Trace cache: 12K uops, L1 D cache: 8K
> <6>CPU: L2 cache: 512K
> <6>CPU: L3 cache: 2048K
> <6>CPU: Hyper-Threading is disabled
> <6>Intel machine check architecture supported.
> <6>Intel machine check reporting enabled on CPU#0.
> <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
> <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
> <6>Enabling fast FPU save and restore... done.
> <6>Enabling unmasked SIMD FPU exception support... done.
> <6>Checking 'hlt' instruction... OK.
> <4>POSIX conformance testing by UNIFIX
> <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
> <4>mtrr: detected mtrr type: Intel
> <6>CPU: Trace cache: 12K uops, L1 D cache: 8K
> <6>CPU: L2 cache: 512K
> <6>CPU: L3 cache: 2048K
> <6>CPU: Hyper-Threading is disabled
> <6>Intel machine check reporting enabled on CPU#0.
> <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
> <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
> <4>CPU0: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
> <4>per-CPU timeslice cutoff: 1462.74 usecs.
> <4>enabled ExtINT on CPU#0
> <4>ESR value before enabling vector: 00000000
> <4>ESR value after enabling vector: 00000000
> <4>Booting processor 1/2 eip 2000
> <6>Initializing CPU#1
> <4>masked ExtINT on CPU#1
> <4>ESR value before enabling vector: 00000000
> <4>ESR value after enabling vector: 00000000
> <4>Calibrating delay loop... 3997.69 BogoMIPS
> <6>CPU: Trace cache: 12K uops, L1 D cache: 8K
> <6>CPU: L2 cache: 512K
> <6>CPU: L3 cache: 2048K
> <6>CPU: Hyper-Threading is disabled
> <6>Intel machine check reporting enabled on CPU#1.
> <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
> <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
> <4>CPU1: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
> <4>Booting processor 2/4 eip 2000
> <6>Initializing CPU#2
> <4>masked ExtINT on CPU#2
> <4>ESR value before enabling vector: 00000000
> <4>ESR value after enabling vector: 00000000
> <4>Calibrating delay loop... 3997.69 BogoMIPS
> <6>CPU: Trace cache: 12K uops, L1 D cache: 8K
> <6>CPU: L2 cache: 512K
> <6>CPU: L3 cache: 2048K
> <6>CPU: Hyper-Threading is disabled
> <6>Intel machine check reporting enabled on CPU#2.
> <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
> <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
> <4>CPU2: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
> <4>Booting processor 3/6 eip 2000
> <6>Initializing CPU#3
> <4>masked ExtINT on CPU#3
> <4>ESR value before enabling vector: 00000000
> <4>ESR value after enabling vector: 00000000
> <4>Calibrating delay loop... 3997.69 BogoMIPS
> <6>CPU: Trace cache: 12K uops, L1 D cache: 8K
> <6>CPU: L2 cache: 512K
> <6>CPU: L3 cache: 2048K
> <6>CPU: Hyper-Threading is disabled
> <6>Intel machine check reporting enabled on CPU#3.
> <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
> <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
> <4>CPU3: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
> <4>Booting processor 4/8 eip 2000
> <6>Initializing CPU#4
> <4>masked ExtINT on CPU#4
> <4>ESR value before enabling vector: 00000000
> <4>ESR value after enabling vector: 00000000
> <4>Calibrating delay loop... 3997.69 BogoMIPS
> <6>CPU: Trace cache: 12K uops, L1 D cache: 8K
> <6>CPU: L2 cache: 512K
> <6>CPU: L3 cache: 2048K
> <6>CPU: Hyper-Threading is disabled
> <6>Intel machine check reporting enabled on CPU#4.
> <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
> <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
> <4>CPU4: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
> <4>Booting processor 5/10 eip 2000
> <6>Initializing CPU#5
> <4>masked ExtINT on CPU#5
> <4>ESR value before enabling vector: 00000000
> <4>ESR value after enabling vector: 00000000
> <4>Calibrating delay loop... 3997.69 BogoMIPS
> <6>CPU: Trace cache: 12K uops, L1 D cache: 8K
> <6>CPU: L2 cache: 512K
> <6>CPU: L3 cache: 2048K
> <6>CPU: Hyper-Threading is disabled
> <6>Intel machine check reporting enabled on CPU#5.
> <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
> <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
> <4>CPU5: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
> <4>Booting processor 6/12 eip 2000
> <6>Initializing CPU#6
> <4>masked ExtINT on CPU#6
> <4>ESR value before enabling vector: 00000000
> <4>ESR value after enabling vector: 00000000
> <4>Calibrating delay loop... 3997.69 BogoMIPS
> <6>CPU: Trace cache: 12K uops, L1 D cache: 8K
> <6>CPU: L2 cache: 512K
> <6>CPU: L3 cache: 2048K
> <6>CPU: Hyper-Threading is disabled
> <6>Intel machine check reporting enabled on CPU#6.
> <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
> <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
> <4>CPU6: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
> <4>Booting processor 7/14 eip 2000
> <6>Initializing CPU#7
> <4>masked ExtINT on CPU#7
> <4>ESR value before enabling vector: 00000000
> <4>ESR value after enabling vector: 00000000
> <4>Calibrating delay loop... 3997.69 BogoMIPS
> <6>CPU: Trace cache: 12K uops, L1 D cache: 8K
> <6>CPU: L2 cache: 512K
> <6>CPU: L3 cache: 2048K
> <6>CPU: Hyper-Threading is disabled
> <6>Intel machine check reporting enabled on CPU#7.
> <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
> <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
> <4>CPU7: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02
> <6>Total of 8 processors activated (31968.46 BogoMIPS).
> <4>Using local APIC timer interrupts.
> <4>calibrating APIC timer ...
> <4>..... CPU clock speed is 1999.3407 MHz.
> <4>..... host bus clock speed is 99.9668 MHz.
> <4>cpu: 0, clocks: 999668, slice: 111074
> <4>CPU0<T0:999664,T1:888576,D:14,S:111074,C:999668>
> <4>cpu: 2, clocks: 999668, slice: 111074
> <4>cpu: 1, clocks: 999668, slice: 111074
> <4>cpu: 3, clocks: 999668, slice: 111074
> <4>cpu: 6, clocks: 999668, slice: 111074
> <4>cpu: 7, clocks: 999668, slice: 111074
> <4>cpu: 5, clocks: 999668, slice: 111074
> <4>cpu: 4, clocks: 999668, slice: 111074
> <4>CPU1<T0:999664,T1:777504,D:12,S:111074,C:999668>
> <4>CPU3<T0:999664,T1:555360,D:8,S:111074,C:999668>
> <4>CPU2<T0:999664,T1:666432,D:10,S:111074,C:999668>
> <4>CPU4<T0:999664,T1:444288,D:6,S:111074,C:999668>
> <4>CPU7<T0:999664,T1:111072,D:0,S:111074,C:999668>
> <4>CPU5<T0:999664,T1:333216,D:4,S:111074,C:999668>
> <4>CPU6<T0:999664,T1:222144,D:2,S:111074,C:999668>
> <4>checking TSC synchronization across CPUs:
> <4>BIOS BUG: CPU#0 improperly initialized, has -3 usecs TSC
> skew! FIXED.
> <4>BIOS BUG: CPU#1 improperly initialized, has -2 usecs TSC
> skew! FIXED.
> <4>BIOS BUG: CPU#3 improperly initialized, has 7 usecs TSC
> skew! FIXED.
> <4>BIOS BUG: CPU#6 improperly initialized, has -2 usecs TSC
> skew! FIXED.
> <4>Waiting on wait_init_idle (map = 0xfe)
> <4>All processors have done init_idle
> <6>PCI: PCI BIOS revision 2.10 entry at 0xf1135, last bus=22
> <6>PCI: Using configuration type 1
> <6>PCI: Probing PCI hardware
> <6>PCI: Ignoring BAR0-3 of IDE controller 00:0f.1
> <6>PCI: Discovered primary peer bus 03 [IRQ]
> <6>PCI: Discovered primary peer bus 07 [IRQ]
> <6>PCI: Discovered primary peer bus 0b [IRQ]
> <6>PCI: Discovered primary peer bus 0f [IRQ]
> <6>PCI: Discovered primary peer bus 13 [IRQ]
> <4>PCI: Device 00:78 not found by BIOS
> <4>PCI: Device 00:7b not found by BIOS
> <4>PCI: Device 00:b8 not found by BIOS
> <4>PCI: Device 00:c0 not found by BIOS
> <4>PCI: Device 00:c2 not found by BIOS
> <4>PCI: Device 00:c4 not found by BIOS
> <4>PCI: Device 00:c6 not found by BIOS
> <4>PCI: Device 00:c8 not found by BIOS
> <4>PCI: Device 00:ca not found by BIOS
> <6>Linux NET4.0 for Linux 2.4
> <6>Based upon Swansea University Computer Society NET3.039
> <4>Initializing RT netlink socket
> <4>Starting kswapd
> <4>allocated 32 pages and 32 bhs reserved for the highmem bounces
> <6>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> <4>pty: 256 Unix98 ptys configured
> <6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS
> SHARE_IRQ SERIAL_PCI enabled
> <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
> <6>Floppy drive(s): fd0 is 1.44M
> <6>FDC 0 is a National Semiconductor PC87306
> <6>loop: loaded (max 8 devices)
> <6>HP CISS Driver (v 2.4.42)
> <7>cciss: Device 0xb178 has been found at bus 0 dev 14 func 0
> <4>cciss: using DAC cycles
> <6> blocks= 35553120 block_size= 512
> <6> heads= 255, sectors= 32, cylinders= 4357 RAID 1(0+1)
> <4>
> <6> blocks= 35553120 block_size= 512
> <6> heads= 255, sectors= 32, cylinders= 4357 RAID 1(0+1)
> <4>
> <4>blk: queue c03d1000, I/O limit 4294967295Mb (mask
> 0xffffffffffffffff)
> <6>Partition check:
> <6> cciss/c0d0: p1 p2 p3 p4 < p5 p6 >
> <6> cciss/c0d1: p1
> <6>tg3.c:v1.5 (March 21, 2003)
> <6>eth0: Tigon3 [partno(284685-003) rev 0105 PHY(5701)]
> (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:0b:cd:52:3d:68
> <6>bonding.c:v2.4.20-20030320 (March 20, 2003)
> <3>bonding_init(): either miimon or arp_interval and
> arp_ip_target module parameters must be specified, otherwise
> bonding will not detect link failures! see bonding.txt for details.
> <6>bond0 registered without MII link monitoring, in load
> balancing (round-robin) mode.
> <6>bond0 registered without ARP monitoring
> <6>Linux agpgart interface v0.99 (c) Jeff Hartmann
> <6>agpgart: Maximum main memory to use for agp memory: 203M
> <7>agpgart: no supported devices found.
> <6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
> <6>ide: Assuming 33MHz system bus speed for PIO modes;
> override with idebus=xx
> <6>SvrWks CSB5: IDE controller at PCI slot 00:0f.1
> <6>SvrWks CSB5: chipset revision 147
> <6>SvrWks CSB5: not 100%% native mode: will probe irqs later
> <6>SvrWks CSB5: simplex device: DMA forced
> <6> ide0: BM-DMA at 0x2820-0x2827, BIOS settings: hda:pio, hdb:pio
> <6>SvrWks CSB5: simplex device: DMA forced
> <6> ide1: BM-DMA at 0x2828-0x282f, BIOS settings: hdc:pio, hdd:pio
> <4>hda: COMPAQ CD-ROM SN-124, ATAPI CD/DVD-ROM drive
> <4>hda: set_drive_speed_status: status=0x51 { DriveReady
> SeekComplete Error }
> <4>hda: set_drive_speed_status: error=0x04
> <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> <4>hda: attached ide-cdrom driver.
> <6>hda: ATAPI 24X CD-ROM drive, 128kB Cache
> <6>Uniform CD-ROM driver Revision: 3.12
> <6>SCSI subsystem driver Revision: 1.00
> <3>kmod: failed to exec /sbin/modprobe -s -k
> scsi_hostadapter, errno = 2
> <3>kmod: failed to exec /sbin/modprobe -s -k
> scsi_hostadapter, errno = 2
> <6>NET4: Linux TCP/IP 1.0 for NET4.0
> <6>IP Protocols: ICMP, UDP, TCP, IGMP
> <6>IP: routing cache hash table of 65536 buckets, 512Kbytes
> <6>TCP: Hash tables configured (established 262144 bind 65536)
> <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> <4>reiserfs: checking transaction log (device 68:01) ...
> <4>Using r5 hash to sort names
> <4>ReiserFS version 3.6.25
> <4>VFS: Mounted root (reiserfs filesystem) readonly.
> <6>Freeing unused kernel memory: 500k freed
> <6>Adding Swap: 2097136k swap-space (priority 42)
> <4>reiserfs: checking transaction log (device 68:11) ...
> <4>Using r5 hash to sort names
> <4>ReiserFS version 3.6.25
> <4>reiserfs: checking transaction log (device 68:06) ...
> <4>Using r5 hash to sort names
> <4>ReiserFS version 3.6.25
> <4>reiserfs: checking transaction log (device 68:02) ...
> <4>Using r5 hash to sort names
> <4>ReiserFS version 3.6.25
> <4>reiserfs: checking transaction log (device 68:03) ...
> <4>Using r5 hash to sort names
> <4>ReiserFS version 3.6.25
> --------------------------------------------------------------------
> I've also messages like this one in /var/log/messages:
> Jun 17 17:49:24 linux kernel: mtrr: type mismatch for
> f6000000,800000 old: write-back new: write-combining
> --------------------------------------------------------------------
>
> Let me know if I need to send other logs from the system.
> Any hint to help me solve the issue would be welcome.
>
> Thanks in advance,
> Bruno.
> --
> Linux Solution Consultant Tél: +33 476 143 278 - Fax:
> +33 476 146 105
> HP/Intel Solution Center http://hpintelco.net Hewlett-Packard
> Grenoble/France
> Des infos sur Linux? http://www.HyPer-Linux.org
http://www.hp.com/linux
La musique ancienne? http://www.musique-ancienne.org http://www.medieval.org
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/