--=_courier-12517-1055972415-0001-2
Content-Type: text/plain; charset=iso-8859-1; format=flowed
Content-Transfer-Encoding: 8bit
My conf is:
2 x AMD Athlon MP 2400+
1Go Ram
MSI K7D Master Mobo
1 SCSI CDrom
and everything else IDE
My kernel:
2.4.21
skas patch(from UML but not very intrusive)
i2c-2.7.0
lm_sensors 2.7.0
Alsa 0.9.4
with ACPI, SMP and HighMem(4Go)
Everything works fine. But if i modprobe amd76x_pm the onboard sound
card(inteli810)
stops working. If i play a sound i can hear the first buffer and then
nothing, that's make
me think that it could be interrupt related.
The Tv cards also doesn't work but it looks like being sound related.
Nothing is visble
in dmesg. amd76x_pm seems to work because i can see via lm_sensors that
CPUs are 200c
cooler.
I tryed with acpi disabled(acpi=off) but it didn't solved the problem.
IIRC the MDK kernel(kernel-enterprise-2.4.21-0.rc1.1mdk-1-1mdk) doesn't
exibit
this behaviour.
I can perform extra test if needed(kernel are quite fast to compile ;)
-- %-------- -- This was sent by Djinn running Linux 2.4.21-skas -- ---------%
--=_courier-12517-1055972415-0001-2 Content-Type: text/plain; name=dmesg; charset=iso-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg"
le (1562k kernel code, 15032k reserved, 509k data, 132k init, 131008k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode cache hash table entries: 65536 (order: 7, 524288 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 CPU0: AMD Athlon(tm) MP 2400+ stepping 01 per-CPU timeslice cutoff: 731.38 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3997.69 BogoMIPS CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 CPU1: AMD Athlon(tm) MP stepping 01 Total of 2 processors activated (7982.28 BogoMIPS). ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-5, 2-11, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 21. number of IO-APIC #2 registers: 24. testing the IO APIC.......................
IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 003 03 0 0 0 0 0 1 1 51 07 003 03 0 0 0 0 0 1 1 59 08 003 03 0 0 0 0 0 1 1 61 09 003 03 0 0 0 0 0 1 1 69 0a 003 03 0 0 0 0 0 1 1 71 0b 000 00 1 0 0 0 0 0 0 00 0c 003 03 0 0 0 0 0 1 1 79 0d 003 03 0 0 0 0 0 1 1 81 0e 003 03 0 0 0 0 0 1 1 89 0f 003 03 0 0 0 0 0 1 1 91 10 003 03 1 1 0 1 0 1 1 99 11 003 03 1 1 0 1 0 1 1 A1 12 003 03 1 1 0 1 0 1 1 A9 13 003 03 1 1 0 1 0 1 1 B1 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2000.1020 MHz. ..... host bus clock speed is 266.6806 MHz. cpu: 0, clocks: 2666806, slice: 888935 CPU0<T0:2666800,T1:1777856,D:9,S:888935,C:2666806> cpu: 1, clocks: 2666806, slice: 888935 CPU1<T0:2666800,T1:888928,D:2,S:888935,C:2666806> checking TSC synchronization across CPUs: passed. Waiting on wait_init_idle (map = 0x2) All processors have done init_idle mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs PCI: PCI BIOS revision 2.10 entry at 0xfb130, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router default [1022/700c] at 00:00.0 PCI->APIC IRQ transform: (B0,I7,P1) -> 17 PCI->APIC IRQ transform: (B1,I5,P0) -> 17 PCI->APIC IRQ transform: (B2,I0,P3) -> 19 PCI->APIC IRQ transform: (B2,I4,P0) -> 16 PCI->APIC IRQ transform: (B2,I5,P0) -> 17 PCI->APIC IRQ transform: (B2,I5,P0) -> 17 PCI->APIC IRQ transform: (B2,I6,P0) -> 18 BIOS failed to enable PCI standards compliance, fixing this error. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 tbxface-0099 [01] Acpi_load_tables : ACPI Tables successfully loaded Parsing Methods:..................................................................................................... 101 Control Methods found and parsed (429 nodes total) ACPI Namespace successfully loaded at root c0364280 ACPI: Core Subsystem version [20011018] evxfevnt-0081 [-29] Acpi_enable : Transition to ACPI mode successful Executing device _INI methods:........................................ 40 Devices found: 40 _STA, 1 _INI Completing Region and Field initialization:.............................. 25/29 Regions, 5/5 Fields initialized (429 nodes total) ACPI: Subsystem enabled matroxfb: Matrox G550 detected matroxfb: MTRR's turned on matroxfb: 640x480x8bpp (virtual: 640x26208) matroxfb: framebuffer at 0xF2000000, mapped to 0xf880f000, size 33554432 Console: switching to colour frame buffer device 80x30 fb0: MATROX VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD7441: IDE controller at PCI slot 00:07.1 AMD7441: chipset revision 4 AMD7441: not 100% native mode: will probe irqs later AMD_IDE: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE (rev 04) UDMA100 controller on pci00:07.1 ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA hdb: C/H/S=19158/16/255 from BIOS ignored hda: IBM-DPTA-372050, ATA DISK drive hdb: WDC WD400BB-00CCB0, ATA DISK drive blk: queue c037e560, I/O limit 4095Mb (mask 0xffffffff) blk: queue c037e6ac, I/O limit 4095Mb (mask 0xffffffff) hdc: WDC WD400BB-00CAA0, ATA DISK drive hdd: TRAXDATA CDRW121032plus, ATAPI CD/DVD-ROM drive blk: queue c037e9d4, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 40088160 sectors (20525 MB) w/1961KiB Cache, CHS=2495/255/63, UDMA(66) hdb: attached ide-disk driver. hdb: host protected area => 1 hdb: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(100) hdc: attached ide-disk driver. hdc: host protected area => 1 hdc: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 p10 p11 > /dev/ide/host0/bus0/target1/lun0: p1 p3 /dev/ide/host0/bus1/target0/lun0: [PTBL] [4865/255/63] p3 matroxfb_crtc2: secondary head of fb0 was registered as fb1 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 132k freed Real Time Clock Driver v1.10e usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci.c: USB OHCI at membase 0xfa82d000, IRQ 19 usb-ohci.c: usb-02:00.0, Advanced Micro Devices [AMD] AMD-768 [Opus] USB usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 4 ports detected usbdevfs: remount parameter error EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,9), internal journal Adding Swap: 128484k swap-space (priority -1) hub.c: new USB device 02:00.0-4, assigned address 2 hub.c: USB hub found hub.c: 4 ports detected hub.c: new USB device 02:00.0-4.1, assigned address 3 usb.c: USB device 3 (vend/prod 0x46d/0x840) is not claimed by any active driver. hub.c: new USB device 02:00.0-4.3, assigned address 4 usb.c: USB device 4 (vend/prod 0x5a9/0x511) is not claimed by any active driver. SCSI subsystem driver Revision: 1.00 ahc_pci:2:6:0: Host Adapter Bios disabled. Using default SCSI device parameters scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 <Adaptec 2902/04/10/15/20/30C SCSI adapter> aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
blk: queue f7aab618, I/O limit 4095Mb (mask 0xffffffff) Linux video capture interface: v1.00 usb.c: registered new driver ov511 ov511.c: USB OV511 video device found ov511.c: model: Lifeview RoboCam ov511.c: Sensor is an OV7610 ov511.c: Device at usb-02:00.0-4.3 registered to minor 0 ov511.c: v1.63 for Linux 2.4 : ov511 USB Camera Driver Vendor: PIONEER Model: CD-ROM DR-U12X Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 blk: queue f7690218, I/O limit 4095Mb (mask 0xffffffff) (scsi0:A:5): 10.000MB/s transfers (10.000MHz, offset 15) i2c-core.o: i2c core module version 2.7.0 (20021208) i2c-algo-bit.o: i2c bit algorithm module version 2.7.0 (20021208) bttv: driver version 0.7.104 loaded bttv: using 4 buffers with 2080k (8320k total) for capture bttv: Host bridge is Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System Controller bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 02:05.0, irq: 17, latency: 32, mmio: 0xf9000000 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 bttv0: using: BT878(Pinnacle PCTV Studio/Ra) [card=39,autodetected] bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: miro: id=9 tuner=3 radio=no stereo=no bttv0: using tuner=3 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951) tuner: probing bt848 #0 i2c adapter [id=0x10005] tuner: chip found @ 0xc0 tuner: type set to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF)) bttv0: PLL: 28636363 => 35468950 .. ok bttv0: registered device video1 bttv0: registered device vbi0 hdd: attached ide-scsi driver. scsi1 : SCSI host adapter emulation for IDE ATAPI devices Vendor: TRAXDATA Model: CDRW121032plus Rev: LSRA Type: CD-ROM ANSI SCSI revision: 02 MSDOS FS: IO charset iso8859-15 MSDOS FS: Using codepage 850 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,3), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,67), internal journal EXT3-fs: mounted filesystem with ordered data mode. MSDOS FS: IO charset iso8859-15 MSDOS FS: Using codepage 850 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,11), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,10), internal journal EXT3-fs: mounted filesystem with ordered data mode. 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt 02:04.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xd000. Vers LK1.1.16 00:50:04:1b:42:ee, IRQ 16 product code 5450 rev 00.9 date 01-14-99 Internal config register is 1800000, transceivers 0xa. 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 786d. Enabling bus-master transmits and whole-frame receives. 02:04.0: scatter/gather enabled. h/w checksums enabled Attached scsi CD-ROM sr0 at scsi0, channel 0, id 5, lun 0 Attached scsi CD-ROM sr1 at scsi1, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 12x/12x xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray i2c-proc.o version 2.7.0 (20021208) i2c-isa.o version 2.7.0 (20021208) tuner: ignoring ISA main adapter i2c adapter [id=0x50000] i2c-isa.o: ISA bus access for i2c modules initialized. i2c-proc.o version 2.7.0 (20021208) eeprom.o version 2.7.0 (20021208) tuner: type already set (3) tuner: type already set (3) tuner: type already set (3) tuner: type already set (3) tuner: type already set (3) tuner: type already set (3) tuner: type already set (3) tuner: type already set (3) w83781d.o version 2.7.0 (20021208) IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver intel8x0: clocking to 48000 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) apm: disabled - APM is not SMP safe. Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 941M agpgart: Detected AMD 760MP chipset agpgart: AGP aperture is 32M @ 0xf0000000 [drm] AGP 0.99 on AMD Irongate @ 0xf0000000 32MB [drm] Initialized mga 3.0.2 20010321 on minor 0 Processor[0]: C0 C1 Processor[1]: C0 C1 btaudio: driver version 0.7 loaded [digital+analog] btaudio: Bt878 (rev 17) at 02:05.1, irq: 17, latency: 32, mmio: 0xf9001000 btaudio: using card config "default" btaudio: registered device dsp1 [digital] btaudio: registered device dsp2 [analog] btaudio: registered device mixer1 amd768_rng: AMD768 system management I/O registers at 0x600. amd768_rng hardware driver 0.1.0 loaded apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) apm: disabled - APM is not SMP safe.
--=_courier-12517-1055972415-0001-2 Content-Type: text/plain; name=pci; charset=iso-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="pci"
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System Controller (rev 11) Flags: bus master, 66Mhz, medium devsel, latency 32 Memory at f0000000 (32-bit, prefetchable) [size=32M] Memory at f9100000 (32-bit, prefetchable) [size=4K] I/O ports at ec00 [disabled] [size=4] Capabilities: <available only to root>
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] AGP Bridge (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 32 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 Memory behind bridge: f4000000-f6ffffff Prefetchable memory behind bridge: f2000000-f3ffffff
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ISA (rev 05) Flags: bus master, 66Mhz, medium devsel, latency 0
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE (rev 04) (prog-if 8a [Master SecP PriP]) Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE Flags: bus master, medium devsel, latency 32 I/O ports at e000 [size=16]
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI (rev 03) Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI Flags: medium devsel
00:07.5 Multimedia audio controller: Advanced Micro Devices [AMD] AMD-768 [Opus] Audio (rev 03) Flags: bus master, medium devsel, latency 32, IRQ 17 I/O ports at e400 [size=256] I/O ports at e800 [size=64]
00:10.0 PCI bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] PCI (rev 05) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 32 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f7000000-f8ffffff Prefetchable memory behind bridge: f9000000-f90fffff
01:05.0 VGA compatible controller: Matrox Graphics, Inc. MGA G550 AGP (rev 01) (prog-if 00 [VGA]) Subsystem: Matrox Graphics, Inc. Millennium G550 Dual Head DDR 32Mb Flags: bus master, medium devsel, latency 32, IRQ 17 Memory at f2000000 (32-bit, prefetchable) [size=32M] Memory at f4000000 (32-bit, non-prefetchable) [size=16K] Memory at f5000000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: <available only to root>
02:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-768 [Opus] USB (rev 07) (prog-if 10 [OHCI]) Flags: bus master, medium devsel, latency 32, IRQ 19 Memory at f8001000 (32-bit, non-prefetchable) [size=4K]
02:04.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24) Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100 Flags: bus master, medium devsel, latency 32, IRQ 16 I/O ports at d000 [size=128] Memory at f8000000 (32-bit, non-prefetchable) [size=128] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: <available only to root>
02:05.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver) Flags: bus master, medium devsel, latency 32, IRQ 17 Memory at f9000000 (32-bit, prefetchable) [size=4K] Capabilities: <available only to root>
02:05.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver, audio section) Flags: bus master, medium devsel, latency 32, IRQ 17 Memory at f9001000 (32-bit, prefetchable) [size=4K] Capabilities: <available only to root>
02:06.0 SCSI storage controller: Adaptec AHA-7850 (rev 03) Subsystem: Adaptec AHA-2904/Integrated AIC-7850 Flags: bus master, medium devsel, latency 32, IRQ 18 I/O ports at d400 [disabled] [size=256] Memory at f8002000 (32-bit, non-prefetchable) [size=4K] Capabilities: <available only to root>
--=_courier-12517-1055972415-0001-2--