2.4.21 panic on CDRW Mount

Dave Bentham (dave.bentham@ntlworld.com)
Thu, 19 Jun 2003 20:21:43 +0100


This is a MIME-formatted message. If you see this text it means that your
E-mail software does not support MIME-formatted messages.

--=_courier-786-1056050529-0001-2
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Hello,

I've now managed to capture the 'panic' output of 2.4.21.

I was running 2.4.20 for quite some time on a Mandrake 9.0 base on a
Pentium IV 1.5MHz PC. When 2.4.21 came out I patched the source and
upgraded to it as I usually do for kernel upgrades.

However, mounting the CDRW makes it all go crappy and it dies. See
attached panic output.

The command was issued on the PC's own attached console, but the
output's captured on an attached serial console (command was 'mount
/mnt/cdrom2' entered in BASH without starting X, etc).

Thanks

Dave

-- 
A computer without Microsoft is like chocolate cake without mustard.

--=_courier-786-1056050529-0001-2 Content-Type: text/plain; name="TelekonRunToPanic.txt"; charset=iso-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="TelekonRunToPanic.txt"

LILO 22.3.2 boot: Loading Linux_2.4.21................ BIOS data check successful Linux version 2.4.21 (root@telekon.davesnet) (gcc version 3.2 (Mandrake Linux 9. 0 3.2-1mdk)) #50 Thu Jun 19 07:51:48 BST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff00 BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 255MB LOWMEM available. On node 0 totalpages: 65520 zone(0): 4096 pages. zone(1): 61424 pages. zone(2): 0 pages. Kernel command line: BOOT_IMAGE=Linux_2.4.21 ro root=303 devfs=mount hdd=ide-scs i console=tty0 console=ttyS0 ide_setup: hdd=ide-scsi Initializing CPU#0 Detected 1498.113 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2988.44 BogoMIPS Memory: 256844k/262080k available (1266k kernel code, 4848k reserved, 462k data, 80k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 256K CPU: Intel(R) Pentium(R) 4 CPU 1.50GHz stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb190, last bus=2 PCI: Using configuration PCI: Probing PCI hardware Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) Starting kswapd Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) w abled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize PPP generic driver version 2.4.2 PPP Deflate Compression module registered Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 203M Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with i hda: ST340810A, ATA DISK drive hdc: LITEON DVD-ROM LTD163, ATAPI CD/DVD-ROM drive hdd: CW038D ATAPI CD-R/RW, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63 hdc: attached ide-cdrom driver. hdc: ATAPI 48X DVD-ROM drive, 512kB Cache Uniform CD-ROM driver Revision: 3.12 hdd: attached ide-scsi driver. Partition check: /dev/ide/host0/bus0/target0/ SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: CyberDrv Model: CW038D CD-R/RW Rev: 110C Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 80k freed INIT: version 2.83 booting Setting default font (lat0-16): [ OK ]

Booting, please wait...

Welcome to Mandrake Linux 9.0 Press 'I' to enter interactive startup. Running DevFs daemon [ OK ] Configuring kernel parameters: [ OK ] Setting clock (utc): Thu Jun 19 16:59:51 BST 2003 [ OK ] Setting hostname telekon.davesnet: [ OK ] Initializing USB controller (usb-uhci): [ OK ] Mount USB filesystem [ OK ] Loading USB printer [ OK ] Checking root filesystem /dev/hda3: clean, 224767/2101152 files, 1419679/4194973 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Activating swap partitions: [ OK ] Finding module dependencies: [ OK ] Checking filesystems /dev/hda4: clean, 42024/3478784 files, 1412964/3476064 blocks [ OK ] Mounting local filesystems: [ OK ] Checking loopback filesystems[ OK ] Mounting loopback filesystems: [ OK ] Loading keymap: uk [ OK ] Loading compose keys: compose.latin9.inc [ OK ] The BackSpace key sends: ^?[ OK ] Turning on user and group quotas for local filesystems: [ OK ] Enabling swap space: [ OK ] Building Window Manager Sessions [ OK ] modprobe: modprobe: Can't locate module eth5 modprobe: modprobe: Can't locate modprobe: modprobe: Can't locate module eth7 INIT: Entering runlevel: 3 Entering non-interactive startup Starting iptables: [ OK ] Setting network parameters: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Bringing up interface eth1: [ OK ] Starting portmapper: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] Starting partmon: [ OK ] Starting console mouse services: [ OK ] Loading sound module (snd-card-0) modprobe: Can't locate module [FAILED] Initializing random number generator: [ OK ] Starting X Font Server: [ OK ] Mounting other filesystems: [ OK ] Starting atd: [ OK ] Starting saslauthd[ OK ] Starting sshd: [ OK ] Starting xinetd: [ OK ] Starting cups: [ OK ] Starting automount:[ OK ] Loading keymap: uk [ OK ] Loading compose keys: compose.latin9.inc [ OK ] The BackSpace key sends: ^?[ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting numlock: [ OK ] Checking internet connections to start Starting crond: [ OK ] Starting squid: [ OK ] Starting Webmin [ OK ] Starting Fetchmail services: [ OK ] Starting SMB services: [ OK ] Starting NMB services: [ OK ] Starting lisa: [ OK ] Starting kheader: [ OK ] Starting cups: [ OK ] Running devfsd actions: [ OK ] Running Linuxconf hooks: [ OK ] alsactl: load_state:1121: No soundcards found...

Mandrake Linux release 9.0 (dolphin) for i586 Kernel 2.4.21 on an i686 / ttyS0 telekon.davesnet login: root Password: Login incorrect

login: Unable to handle kernel NULL pointer dereference at virtual address 00000 000 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[<00000000>] Not tainted EFLAGS: 00010202 eax: c02ecab4 ebx: c02ecca0 ecx: 00000000 edx: 00000170 esi: cf6f0d60 edi: c12cee80 ebp: cf223a8c esp: cf223a64 ds: 0018 es: 0018 ss: 0018 Process mount (pid: 2255, stackpage=cf223000) Stack: c01d8054 c02ecca0 cf6f0d60 0000000c 00000000 000001f4 c12cee80 c02ecca0 00000040 00000000 cf223ac0 c01c21e2 c02ecca0 cf6f0d 000001f4 c02ecca0 00000000 00000002 c02ecca0 cff3f260 cf237ea0 cf223ae4 Call Trace: [<c01d8054>] [<c01c21e2>] [<c01c235e>] [<c01c2a2f>] [<c01d8cd4>] [<c01cd575>] [<c01d2dc0>] [<c01d2b30>] [<c01d4845>] [<c01d2b30>] [<c01d3d35>] [<c01d3dc9>] [<c01cd6a5>] [<c01ccff0>] [<c01dac15>] [<c01dbe8b>] [<c01d9455>] [<c01e2c2e>] [<c01e2ca2>] [<c013f45a>] [<c01d9bd8>] [<c01e236a>] [<c01e21c1>] [<c013abdf>] [<c013f671>] [<c013f6ff>] [<c017d276>] [<c013e17c>] [<c013e583>] [<c015064d>] [<c0150945>] [<c01507

Code: Bad EIP value. <7>IPT INPUT packet died: IN=eth1 OUT= MAC= SRC=80.5.242.41 DST=255.255.255.255 LEN=137 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=631 DPT=631 LEN=117 IPT INPUT packet died: IN=eth1 OUT= MAC= SRC=80.5.242.41 DST=255.255.255.255 LEN =149 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=631 DPT=631 LEN=129 Login timed out Mandrake Linux release 9.0 (dolphin) for i586 Kernel 2.4.21 on an i686 / ttyS0 telekon.davesnet login: scsi : aborting command due to timeout : pid 6, scsi0, c hannel 0, id 0, lun 0 0x43 00 00 00 00 00 00 00 0c 40 Kernel 2.4.21 hdd: irq timeout: status=0xd0 { Busy } Unable to handle kernel NULL pointer dereference at virtual address 00000000 printing eip: 00000000 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[<00000000>] Not tainted EFLAGS: 00010203 eax: c02ecab4 ebx: c02ecca0 ecx: 00000000 edx: 00000170 esi: cf6f0d60 edi: c12cee80 ebp: c02b3e94 esp: c02b3e6c ds: 0018 es: 0018 ss: 0018 Process swapper (pid: 0, stackpage=c02b3000) Stack: c01d8054 c02ecca0 cf6f0d60 0000000c 00000000 000001f4 c12cee80 c02ecca0 00000040 00000000 c02b3ec8 c01c21e2 c02ecca0 cf6f0d60 00000000 00000088 000001f4 c02b3eec 00000000 00000018 c02ecca0 cff3f260 cf237ea0 c02b3eec Call Trace: [<c01d8054>] [<c01c21e2>] [<c01c235e>] [<c01c260c>] [<c01172a0>] [<c01c2520>] [<c0122a9b>] [<c01221f6>] [<c011eff2>] [<c011eee6>] [<c011ed16>] [<c010a9b0>] [<c0107250>] [<c010d038>] [<c0107250>] [<c0107273>] [<c0107302>] [<c0105000>]

Code: Bad EIP value. <0>Kernel panic: Aiee, killing interrupt handler! In interrupt handler - not syncing

--=_courier-786-1056050529-0001-2--