Linux 2.5.73 - panic (freed memory) on CD-Recorder errors

Pavel Roskin (proski@gnu.org)
Mon, 23 Jun 2003 01:55:39 -0400 (EDT)


This message is in MIME format. The first part should be readable text,
while the remaining parts are likely unreadable without MIME-aware tools.
Send mail to mime@docserver.cac.washington.edu for more info.

--Boundary_(ID_KQU5f860Tt8ZUOYj2FT1jA)
Content-id: <Pine.LNX.4.44.0306230154291.1900@localhost.localdomain>
Content-type: TEXT/PLAIN; CHARSET=US-ASCII
Content-transfer-encoding: 7BIT

Hello!

I have been experiencing kernel panics with 2.5.x kernels when writing
oversized images like Knoppix to low-quality CDs using the IDE driver
without SCSI emulation.

Finally I have found a very simple way to reproduce the panic immediately
and without sacrificing a blank CD. Just try writing over a recorded disc
in the dummy mode (i.e. with the laser turned off).

I have captured the panic on the serial console. cdrecord was running on
that terminal as well, so you see the order in which it happened. The
kernel .config file and the kernel messages (without serial console being
active) are attached.

This panic occurred on Linux 2.5.73, but I remember the same function
names in the stack trace with older 2.5.x kernels when I was writing
Knoppix.

Note 6b6b6b6b in the eax and esi registers and on the stack. That must be
freed memory. __end_that_request_first() is a static function in
drivers/block/ll_rw_blk.c

-- 
Regards,
Pavel Roskin

--Boundary_(ID_KQU5f860Tt8ZUOYj2FT1jA) Content-id: <Pine.LNX.4.44.0306230127170.1694@localhost.localdomain> Content-type: TEXT/PLAIN; NAME=dmesg; CHARSET=US-ASCII Content-description: Content-disposition: ATTACHMENT; FILENAME=dmesg Content-transfer-encoding: 7BIT

Linux version 2.5.73 (proski@portland) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #8 Mon Jun 23 00:44:03 EDT 2003 Video mode to be used for restore is 122 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 32752 pages, LIFO batch:7 ACPI: RSDP (v000 VIA694 ) @ 0x000f6d40 ACPI: RSDT (v001 VIA694 AWRDACPI 16944.11825) @ 0x3fff3000 ACPI: FADT (v001 VIA694 AWRDACPI 16944.11825) @ 0x3fff3040 ACPI: DSDT (v001 VIA694 AWRDACPI 00000.04096) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: MADT not present Building zonelist for node : 0 Kernel command line: ro root=/dev/hdc5 vga=0x0122 Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 1002.386 MHz processor. Console: colour VGA+ 100x30 Calibrating delay loop... 1974.27 BogoMIPS Memory: 1033168k/1048512k available (2640k kernel code, 14408k reserved, 878k data, 144k init, 131008k highmem) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) processor stepping 02 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1001.0613 MHz. ..... host bus clock speed is 200.0322 MHz. Initializing RT netlink socket PCI: Using configuration type 1 mtrr: v2.0 (20020519) BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20030619 spurious 8259A interrupt: IRQ7. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Disabling VIA memory write queue (PCI ID 0305, rev 02): [55] 89 & 1f -> 09 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15) Linux Plug and Play Support v0.96 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fbf80 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbfb0, dseg 0xf0000 PnPBIOS: 12 nodes reported by PnP BIOS; 12 recorded by driver block request queues: 4/128 requests per read queue 4/128 requests per write queue enter congestion at 15 exit congestion at 17 drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' pty: 256 Unix98 ptys configured Machine check exception polling timer started. Enabling SEP on CPU 0 highmem bounce pool size: 64 pages Journalled Block Device driver loaded devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 SGI XFS for Linux 2.5.73 with no debug enabled ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states) Real Time Clock Driver v1.11 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA Apollo Pro KT133/KM133/TwisterK chipset agpgart: Maximum main memory to use for agp memory: 941M agpgart: AGP aperture is 64M @ 0xe8000000 [drm] Initialized radeon 1.8.0 20020828 on minor 0 Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 00:09.0: 3Com PCI 3c905C Tornado at 0xb800. Vers LK1.1.19 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 00:07.1 VP_IDE: chipset revision 16 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1 ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:DMA hda: SAMSUNG SV3063H, ATA DISK drive hdb: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: WDC WD600BB-00CAA1, ATA DISK drive hdd: CR-4804TE, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: host protected area => 1 hda: 59797584 sectors (30616 MB) w/426KiB Cache, CHS=59323/16/63, UDMA(66) /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 > p3 p4 hdc: max request size: 128KiB hdc: host protected area => 1 hdc: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=116301/16/63, UDMA(66) /dev/ide/host0/bus1/target0/lun0: p1 p2 < p5 p6 p7 > hdd: ATAPI 24X CD-ROM CD-R/RW drive, 2048kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 uhci-hcd 0000:00:07.2: VIA Technologies, In USB uhci-hcd 0000:00:07.2: irq 12, io base 0000a400 Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated. uhci-hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 hub 1-0:0: USB hub found hub 1-0:0: 2 ports detected uhci-hcd 0000:00:07.3: VIA Technologies, In USB (#2) uhci-hcd 0000:00:07.3: irq 12, io base 0000a800 uhci-hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 hub 2-0:0: USB hub found hub 2-0:0: 2 ports detected drivers/usb/core/usb.c: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver drivers/usb/core/usb.c: registered new driver usbscanner drivers/usb/image/scanner.c: 0.4.13:USB Scanner Driver mice: PS/2 mouse device common for all mice input: PC Speaker serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 Advanced Linux Sound Architecture Driver Version 0.9.4 (Mon Jun 09 12:01:18 2003 UTC). PCI: Setting latency timer of device 00:07.5 to 64 hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x101 hub 1-0:0: new USB device on port 1, assigned address 2 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1056 hub 2-0:0: debounce: port 1: delay 100ms stable 4 status 0x301 ALSA device list: #0: VIA 82C686A/B rev20 at 0xac00, irq 10 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) ip_conntrack version 2.1 (8191 buckets, 65528 max) - 300 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. hub 2-0:0: new USB device on port 1, assigned address 2 input: USB HID v1.00 Mouse [Cypress Sem PS2/USB Browser Combo Mouse] on usb-00:07.3-1 kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 144k freed Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated. EXT3 FS 2.4-0.9.16, 02 Dec 2001 on hdc5, internal journal Adding 514040k swap on /dev/hdc6. Priority:-1 extents:1 found reiserfs format "3.6" with standard journal Reiserfs journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda6) for (hda6) Using r5 hash to sort names found reiserfs format "3.6" with standard journal Reiserfs journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda3) for (hda3) Using r5 hash to sort names kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. ide-floppy driver 0.99.newide hdb: No disk in drive hdb: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm agpgart: Found an AGP 2.0 compliant device at 00:00.0. agpgart: Putting AGP V2 device at 00:00.0 into 1x mode agpgart: Putting AGP V2 device at 01:00.0 into 1x mode

--Boundary_(ID_KQU5f860Tt8ZUOYj2FT1jA) Content-id: <Pine.LNX.4.44.0306230127171.1694@localhost.localdomain> Content-type: TEXT/PLAIN; NAME=panic; CHARSET=US-ASCII Content-description: Content-disposition: ATTACHMENT; FILENAME=panic Content-transfer-encoding: 7BIT

[root@portland root]# cdrecord -v -dummy -dev=/dev/cdroms/cdrom0 /bin/ls Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jrg Schilling TOC Type: 1 = CD-ROM scsidev: '/dev/cdroms/cdrom0' devname: '/dev/cdroms/cdrom0' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 Using libscg version 'schily-0.7' cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.75-RH '@(#)scsi-linux-sg.c 1.75 02/10/21 Copyright 1997 J. Schilling'). atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'MITSUMI ' Identifikation : 'CR-4804TE ' Revision : '3.0D' Device seems to be: Philips CDD-522. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC SWABAUDIO Supported modes: TAO PACKET RAW/R16 RAW/R96R Drive buf size : 1343488 = 1312 KB FIFO size : 4194304 = 4096 KB Track 01: data 0 MB padsize: 532 KB Total size: 0 MB (00:04.02) = 302 sectors Lout start: 1 MB (00:06/02) = 302 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type C, low Beta category (C-) (6) ATIP start of lead in: -11640 (97:26/60) ATIP start of lead out: 337350 (75:00/00) Disk type: Long strategy type (Cyanine, AZO or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Trying to clear drive status. cdrecord: Drive needs to reload the media to return to proper status. Starting to write CD/DVD at speed 4 in dummy TAO mode for single session. Last chance to quit, starting dummy write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Unable to handle kernel paging request Track 02: 0 at virtual address 6b6b6b87 of 0 MB writ printing eip: ten.cdrecord: Suc02aec83 ccess. write_g1:*pde = 00000000 scsi sendcmd: nOops: 0000 [#1] CPU: 0 EIP: 0060:[<c02aec83>] Not tainted EFLAGS: 00010202 EIP is at __end_that_request_first+0x93/0x200 eax: 6b6b6b6b ebx: 00000000 ecx: c04cb2f0 edx: c1b71cb0 esi: 6b6b6b6b edi: 00000000 ebp: c0471eb0 esp: c0471e7c ds: 007b es: 007b ss: 0068 Process swapper (pid: 0, threadinfo=c0470000 task=c03f2d80) Stack: 00003461 00000001 c0471eb0 c02d1a47 6b6b6b6b c1b44ad0 00000000 00000000 00000000 00000000 00000000 c1b71cb0 00000000 c0471ef0 c02d321d c1b71cb0 00000001 6b6b6b6b c04cb2f0 c1b71cb0 c02d1c40 c04cb414 c0470000 c0470000 Call Trace: [<c02d1a47>] cdrom_decode_status+0x127/0x320 [<c02d321d>] cdrom_newpc_intr+0x49d/0x4f0 [<c02d1c40>] cdrom_timer_expiry+0x0/0x40 [<c02c408b>] ide_intr+0xfb/0x190 [<c02d2d80>] cdrom_newpc_intr+0x0/0x4f0 [<c010ac4b>] handle_IRQ_event+0x3b/0x70 [<c010afc1>] do_IRQ+0xb1/0x170 [<c0109458>] common_interrupt+0x18/0x20 [<c02673d3>] acpi_processor_idle+0x15a/0x1ef [<c0107040>] default_idle+0x0/0x30 [<c0267279>] acpi_processor_idle+0x0/0x1ef [<c0107040>] default_idle+0x0/0x30 [<c01070e1>] cpu_idle+0x31/0x40 [<c0105000>] _stext+0x0/0x60 [<c0472729>] start_kernel+0x149/0x150 [<c04724a0>] unknown_bootoption+0x0/0x100

Code: 8b 4e 1c 39 4d 10 89 4d e0 0f 83 23 01 00 00 0f b7 46 16 8b o error CDB: 2<0>Kernel panic: Fatal exception in interrupt A 00 00 00 00 00In interrupt handler - not syncing 00 00 1F 00 st atus: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 05 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 0.001s timeout 40s

write track data: error after 0 bytes

--Boundary_(ID_KQU5f860Tt8ZUOYj2FT1jA) Content-id: <Pine.LNX.4.44.0306230127172.1694@localhost.localdomain> Content-type: TEXT/PLAIN; NAME=.config; CHARSET=US-ASCII Content-description: Content-disposition: ATTACHMENT; FILENAME=.config Content-transfer-encoding: 7BIT

# # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y

# # Code maturity level options # CONFIG_EXPERIMENTAL=y

# # General setup # CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_LOG_BUF_SHIFT=17 # CONFIG_EMBEDDED is not set CONFIG_FUTEX=y CONFIG_EPOLL=y

# # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set CONFIG_KMOD=y

# # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set CONFIG_MK7=y # CONFIG_MK8 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_USE_3DNOW=y # CONFIG_HUGETLB_PAGE is not set # CONFIG_SMP is not set CONFIG_PREEMPT=y CONFIG_X86_UP_APIC=y # CONFIG_X86_UP_IOAPIC is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_TSC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_NONFATAL=y # CONFIG_X86_MCE_P4THERMAL is not set # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set # CONFIG_EDD is not set # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_HIGHMEM=y # CONFIG_HIGHPTE is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y CONFIG_HAVE_DEC_LOCK=y

# # Power management options (ACPI, APM) # CONFIG_PM=y # CONFIG_SOFTWARE_SUSPEND is not set

# # ACPI Support # CONFIG_ACPI=y # CONFIG_ACPI_HT_ONLY is not set CONFIG_ACPI_BOOT=y # CONFIG_ACPI_AC is not set # CONFIG_ACPI_BATTERY is not set CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_BUS=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_APM is not set

# # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set

# # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set CONFIG_PCI_GODIRECT=y # CONFIG_PCI_GOANY is not set CONFIG_PCI_DIRECT=y # CONFIG_PCI_LEGACY_PROC is not set CONFIG_PCI_NAMES=y # CONFIG_ISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set CONFIG_HOTPLUG=y

# # PCMCIA/CardBus support # CONFIG_PCMCIA=m CONFIG_YENTA=m CONFIG_CARDBUS=y # CONFIG_I82092 is not set # CONFIG_TCIC is not set

# # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set

# # Executable file formats # CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set

# # Generic Driver Options # CONFIG_FW_LOADER=m

# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set

# # Parallel port support # # CONFIG_PARPORT is not set

# # Plug and Play support # CONFIG_PNP=y CONFIG_PNP_NAMES=y # CONFIG_PNP_DEBUG is not set

# # Protocols # # CONFIG_ISAPNP is not set CONFIG_PNPBIOS=y

# # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_LBD is not set

# # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y

# # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y

# # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set # CONFIG_IDEDISK_STROKE is not set CONFIG_BLK_DEV_IDECS=m CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDEFLOPPY=m # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_TASKFILE_IO=y

# # IDE chipset support/bugfixes # # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_BLK_DEV_GENERIC=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDE_TCQ is not set # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_PCI_WIP is not set CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_RZ1000 is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y CONFIG_IDEDMA_AUTO=y # CONFIG_IDEDMA_IVB is not set CONFIG_BLK_DEV_IDE_MODES=y

# # SCSI device support # # CONFIG_SCSI is not set

# # Multi-device support (RAID and LVM) # # CONFIG_MD is not set

# # Fusion MPT device support #

# # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set

# # I2O device support # # CONFIG_I2O is not set

# # Networking support # CONFIG_NET=y

# # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_NETLINK_DEV=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set

# # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=y # CONFIG_IP_NF_FTP is not set # CONFIG_IP_NF_IRC is not set # CONFIG_IP_NF_TFTP is not set # CONFIG_IP_NF_AMANDA is not set # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=y # CONFIG_IP_NF_MATCH_LIMIT is not set # CONFIG_IP_NF_MATCH_MAC is not set # CONFIG_IP_NF_MATCH_PKTTYPE is not set # CONFIG_IP_NF_MATCH_MARK is not set # CONFIG_IP_NF_MATCH_MULTIPORT is not set # CONFIG_IP_NF_MATCH_TOS is not set # CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_DSCP is not set # CONFIG_IP_NF_MATCH_AH_ESP is not set # CONFIG_IP_NF_MATCH_LENGTH is not set # CONFIG_IP_NF_MATCH_TTL is not set # CONFIG_IP_NF_MATCH_TCPMSS is not set # CONFIG_IP_NF_MATCH_HELPER is not set # CONFIG_IP_NF_MATCH_STATE is not set # CONFIG_IP_NF_MATCH_CONNTRACK is not set # CONFIG_IP_NF_MATCH_UNCLEAN is not set # CONFIG_IP_NF_MATCH_OWNER is not set CONFIG_IP_NF_FILTER=y CONFIG_IP_NF_TARGET_REJECT=y # CONFIG_IP_NF_TARGET_MIRROR is not set CONFIG_IP_NF_NAT=y CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=y # CONFIG_IP_NF_TARGET_REDIRECT is not set # CONFIG_IP_NF_NAT_LOCAL is not set # CONFIG_IP_NF_NAT_SNMP_BASIC is not set # CONFIG_IP_NF_MANGLE is not set # CONFIG_IP_NF_TARGET_LOG is not set # CONFIG_IP_NF_TARGET_ULOG is not set # CONFIG_IP_NF_TARGET_TCPMSS is not set # CONFIG_IP_NF_ARPTABLES is not set # CONFIG_IPV6 is not set # CONFIG_XFRM_USER is not set

# # SCTP Configuration (EXPERIMENTAL) # CONFIG_IPV6_SCTP__=y # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_LLC is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set

# # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set

# # Network testing # # CONFIG_NET_PKTGEN is not set CONFIG_NETDEVICES=y

# # ARCnet devices # # CONFIG_ARCNET is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_ETHERTAP is not set # CONFIG_NET_SB1000 is not set

# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set CONFIG_NET_VENDOR_3COM=y CONFIG_VORTEX=y # CONFIG_TYPHOON is not set

# # Tulip family network device support # # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_NET_PCI is not set

# # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set

# # Ethernet (10000 Mbit) # # CONFIG_IXGB is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set

# # Wireless LAN (non-hamradio) # CONFIG_NET_RADIO=y

# # Obsolete Wireless cards support (pre-802.11) # # CONFIG_STRIP is not set # CONFIG_PCMCIA_WAVELAN is not set # CONFIG_PCMCIA_NETWAVE is not set

# # Wireless 802.11 Frequency Hopping cards support # # CONFIG_PCMCIA_RAYCS is not set

# # Wireless 802.11b ISA/PCI cards support # # CONFIG_AIRO is not set # CONFIG_HERMES is not set

# # Wireless 802.11b Pcmcia/Cardbus cards support # # CONFIG_AIRO_CS is not set # CONFIG_PCMCIA_ATMEL is not set CONFIG_NET_WIRELESS=y

# # Token Ring devices (depends on LLC=y) # # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set

# # Wan interfaces # # CONFIG_WAN is not set

# # PCMCIA network device support # CONFIG_NET_PCMCIA=y # CONFIG_PCMCIA_3C589 is not set # CONFIG_PCMCIA_3C574 is not set # CONFIG_PCMCIA_FMVJ18X is not set CONFIG_PCMCIA_PCNET=m # CONFIG_PCMCIA_NMCLAN is not set # CONFIG_PCMCIA_SMC91C92 is not set # CONFIG_PCMCIA_XIRC2PS is not set # CONFIG_PCMCIA_AXNET is not set

# # Amateur Radio support # # CONFIG_HAMRADIO is not set

# # IrDA (infrared) support # # CONFIG_IRDA is not set

# # ISDN subsystem # # CONFIG_ISDN_BOOL is not set

# # Telephony Support # # CONFIG_PHONE is not set

# # Input device support # CONFIG_INPUT=y

# # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set

# # Input I/O drivers # # CONFIG_GAMEPORT is not set CONFIG_SOUND_GAMEPORT=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set

# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=y # CONFIG_INPUT_UINPUT is not set

# # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set

# # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_ACPI=y # CONFIG_SERIAL_8250_EXTENDED is not set

# # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256

# # I2C support # # CONFIG_I2C is not set

# # I2C Hardware Sensors Mainboard support #

# # I2C Hardware Sensors Chip support # # CONFIG_I2C_SENSOR is not set

# # Mice # # CONFIG_BUSMOUSE is not set # CONFIG_QIC02_TAPE is not set

# # IPMI # # CONFIG_IPMI_HANDLER is not set

# # Watchdog Cards # # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set

# # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=y # CONFIG_AGP_ALI is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD_8151 is not set # CONFIG_AGP_INTEL is not set # CONFIG_AGP_NVIDIA is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_SWORKS is not set CONFIG_AGP_VIA=y CONFIG_DRM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_GAMMA is not set # CONFIG_DRM_R128 is not set CONFIG_DRM_RADEON=y # CONFIG_DRM_MGA is not set

# # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HANGCHECK_TIMER is not set

# # Multimedia devices # # CONFIG_VIDEO_DEV is not set

# # Digital Video Broadcasting Devices # # CONFIG_DVB is not set

# # File systems # # CONFIG_EXT2_FS is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=y # CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set

# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y # CONFIG_ZISOFS is not set # CONFIG_UDF_FS is not set

# # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set CONFIG_VFAT_FS=y # CONFIG_NTFS_FS is not set

# # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_DEVFS_FS=y CONFIG_DEVFS_MOUNT=y # CONFIG_DEVFS_DEBUG is not set CONFIG_DEVPTS_FS=y # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y CONFIG_RAMFS=y

# # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set

# # Network File Systems # # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_EXPORTFS is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set # CONFIG_AFS_FS is not set

# # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y

# # Native Language Support # CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set

# # Graphics support # # CONFIG_FB is not set CONFIG_VIDEO_SELECT=y

# # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y

# # Sound # CONFIG_SOUND=y

# # Advanced Linux Sound Architecture # CONFIG_SND=y # CONFIG_SND_SEQUENCER is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_RTCTIMER=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set

# # Generic devices # # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set

# # PCI devices # # CONFIG_SND_ALI5451 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_SONICVIBES is not set CONFIG_SND_VIA82XX=y # CONFIG_SND_VX222 is not set

# # ALSA USB devices # # CONFIG_SND_USB_AUDIO is not set

# # PCMCIA devices # # CONFIG_SND_VXPOCKET is not set # CONFIG_SND_VXP440 is not set

# # Open Sound System # # CONFIG_SOUND_PRIME is not set

# # USB support # CONFIG_USB=y # CONFIG_USB_DEBUG is not set

# # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set

# # USB Host Controller Drivers # # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y

# # USB Device Class drivers # # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y

# # SCSI support is needed for USB Storage #

# # USB Human Interface Devices (HID) # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_XPAD is not set

# # USB Imaging devices # # CONFIG_USB_MDC800 is not set CONFIG_USB_SCANNER=y

# # USB Multimedia devices # # CONFIG_USB_DABUSB is not set

# # Video4Linux support is needed for USB Multimedia device support #

# # USB Network adaptors # # CONFIG_USB_AX8817X is not set # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set

# # USB port drivers #

# # USB Serial Converter support # CONFIG_USB_SERIAL=m # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set CONFIG_USB_SERIAL_VISOR=m # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OMNINET is not set

# # USB Miscellaneous drivers # # CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_BRLVGER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_TEST is not set # CONFIG_USB_GADGET is not set

# # Bluetooth support # # CONFIG_BT is not set

# # Profiling support # # CONFIG_PROFILING is not set

# # Kernel hacking # CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_SLAB=y CONFIG_DEBUG_IOVIRT=y CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_HIGHMEM=y CONFIG_KALLSYMS=y CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_FRAME_POINTER=y CONFIG_X86_EXTRA_IRQS=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y

# # Security options # # CONFIG_SECURITY is not set

# # Cryptographic options # # CONFIG_CRYPTO is not set

# # Library routines # # CONFIG_CRC32 is not set CONFIG_X86_BIOS_REBOOT=y

--Boundary_(ID_KQU5f860Tt8ZUOYj2FT1jA)-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/