--=_courier-8233-1056436350-0001-2
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
On Tue, 2003-06-24 02:53:29 +0200, Bartlomiej Zolnierkiewicz <B.Zolnierkiew=
icz@elka.pw.edu.pl>
wrote in message <Pine.SOL.4.30.0306240249410.5865-100000@mion.elka.pw.edu.=
pl>:
> On Tue, 24 Jun 2003, Jan-Benedict Glaw wrote:
> > > TCQ shouldn't be enabled on hdc, you have two drives on second ide
> > > channel and current TCQ driver design allows only one drive per chann=
el,
> > > so proper fix is to not enable TCQ :-).
> >
> > Your patch works for me - TCQ gets no longer stitched on while I've
> > configured to default ON, queue depth 32:
> >
> > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> > ide: Assuming 33MHz system bus speed for PIO modes; override with idebu=
s=3Dxx
> > PIIX4: IDE controller at PCI slot 00:07.1
> > PIIX4: chipset revision 1
> > PIIX4: not 100% native mode: will probe irqs later
> > ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
> > ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
> > hda: WDC AC2850F, ATA DISK drive
> > hdb: IC35L040AVER07-0, ATA DISK drive
> > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> > hdc: IC35L120AVV207-0, ATA DISK drive
> > hdd: Maxtor 4W100H6, ATA DISK drive
> > ide1 at 0x170-0x177,0x376 on irq 15
> > hda: max request size: 128KiB
> > hda: task_no_data_intr: status=3D0x51 { DriveReady SeekComplete Error }
> > hda: task_no_data_intr: error=3D0x04 { DriveStatusError }
> > hda: 1667232 sectors (854 MB) w/64KiB Cache, CHS=3D1654/16/63, DMA
> > hda: hda1 hda2 hda3
> > hdb: max request size: 128KiB
> > hdb: host protected area =3D> 1
> > hdb: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=3D79780/16/63, UD=
MA(33)
> > hdb: hdb1 hdb2 hdb3 hdb4
> > hdc: max request size: 1024KiB
> > hdc: host protected area =3D> 1
> > hdc: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=3D15017/255/63,=
UDMA(33)
> > hdc: hdc1 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 hdc11 hdc12 hdc13 hdc14 hdc=
15 hdc16 hdc17 >
> > hdd: max request size: 128KiB
> > hdd: host protected area =3D> 1
> > hdd: 195711264 sectors (100204 MB) w/2048KiB Cache, CHS=3D194158/16/63,=
UDMA(33)
> > hdd: hdd1 < hdd5 hdd6 hdd7 hdd8 hdd9 hdd10 hdd11 hdd12 hdd13 hdd14 >
>=20
> There is no info about IDE trying (then failing) to enable TCQ ?
No, there isn't. The box is now up'n'running for nearly 7 hours - that
should have been enough:) That's with your patch applied and the IDE
config as attached below.
Up to now, there's not a single IDE failure of any kind *knock on wood*.
MfG, JBG
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=3Dy
CONFIG_IDEDISK_MULTI_MODE=3Dy
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=3Dm
CONFIG_BLK_DEV_IDEFLOPPY=3Dm
CONFIG_BLK_DEV_IDESCSI=3Dm
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=3Dy
CONFIG_BLK_DEV_GENERIC=3Dy
CONFIG_IDEPCI_SHARE_IRQ=3Dy
CONFIG_BLK_DEV_IDEDMA_PCI=3Dy
CONFIG_BLK_DEV_IDE_TCQ=3Dy
CONFIG_BLK_DEV_IDE_TCQ_DEFAULT=3Dy
CONFIG_BLK_DEV_IDE_TCQ_DEPTH=3D32
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=3Dy
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=3Dy
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=3Dy
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=3Dy
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=3Dy
# CONFIG_IDEDMA_IVB is not set
CONFIG_BLK_DEV_IDE_MODES=3Dy
--=20
Jan-Benedict Glaw jbglaw@lug-owl.de . +49-172-7608481
"Eine Freie Meinung in einem Freien Kopf | Gegen Zensur | Gegen Krieg
fuer einen Freien Staat voll Freier B=FCrger" | im Internet! | im Ira=
k!
ret =3D do_actions((curr | FREE_SPEECH) & ~(IRAQ_WAR_2 | DRM | TCPA));
--=_courier-8233-1056436350-0001-2
Content-Type: application/pgp-signature
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)
iD8DBQE+9/BJHb1edYOZ4bsRArXAAJ9Oz7MdC8AfSJQZK35rJ/NpUqwbngCgkR9F
1ebs71I7EpBG+tRuyLpTIVU=
=2MP1
-----END PGP SIGNATURE-----
--=_courier-8233-1056436350-0001-2--