PROBLEM: reproduceable 2.4.21 NFS client Freeze

Sven Geggus (sven@gegg.us)
Wed, 25 Jun 2003 10:05:49 +0200


This is a MIME-formatted message. If you see this text it means that your
E-mail software does not support MIME-formatted messages.

--=_courier-28398-1056528992-0001-2
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Hello,

looks like my previous Bug-Report has been somewhat unspecific. So here is a
version which has the form suggested in the REPORTING-BUGS documentation.

[1.] reproduceable 2.4.21 NFS client Freeze

[2.] When an NFS Volume mounted from a Windows 2000 Machine (Hummingbird NFS
Maestro Server, Version unknown) is accessed using something like "ls
/mountpoint" the machine freezes immediately. The state is not
completely frozen, but a state where anything but ICMP-echo responces
seem to be frozen.

[3.] Kernelmode NFS client

[4.] Linux version 2.4.21 (root@neptun)
(gcc version 2.95.4 20011002 (Debian prerelease))
#1 Mon Jun 16 13:43:25 CEST 2003
This is a vanilla Kernel!

[5.] There is no oops

[6.] a simple "ls /mountpoint" triggers the Problem. Here is what the Kernel
reports with rpc_debug and nfs_debug enabled in between the time the
"ls /mountpoint" is started and the freeze:

RPC: 24 call_start nfs3 proc 1 (sync)
RPC: 24 call_reserve
RPC: 24 reserved req df16d078 xid 81c60017
RPC: 24 xprt_reserve returns 0
RPC: 24 call_reserveresult (status 0)
RPC: 24 call_allocate (status 0)
RPC: 24 call_encode (status 0)
RPC: 24 call_transmit (status 0)
RPC: 24 xprt_transmit(81c60017)
RPC: 24 xprt_cwnd_limited cong = 0 cwnd = 512
RPC: xprt_sendmsg(0) = 108
RPC: udp_data_ready...
RPC: udp_data_ready client df16d000
RPC: 24 received reply
RPC: cong 256, cwnd was 512, now 512
RPC: 24 has input (112 bytes)
RPC: 24 xmit complete
RPC: 24 call_status (status 112)
RPC: 24 call_decode (status 112)
RPC: 24 call_decode result 0
RPC: 24 release request df16d078
RPC: rpc_release_client(dfd6b480, 2)
NFS: refresh_inode(7/395120 ct=1 info=0x6)
RPC: 25 call_start nfs3 proc 4 (sync)
RPC: 25 call_reserve
RPC: 25 reserved req df16d078 xid 81c60018
RPC: 25 xprt_reserve returns 0
RPC: 25 call_reserveresult (status 0)
RPC: 25 call_allocate (status 0)
RPC: 25 call_encode (status 0)
RPC: 25 call_transmit (status 0)
RPC: 25 xprt_transmit(81c60018)
RPC: 25 xprt_cwnd_limited cong = 0 cwnd = 512
RPC: xprt_sendmsg(0) = 112
RPC: 25 xmit complete
RPC: udp_data_ready...
RPC: udp_data_ready client df16d000
RPC: 25 received reply
RPC: cong 256, cwnd was 512, now 512
RPC: 25 has input (36 bytes)
RPC: 25 call_status (status 36)
RPC: 25 call_decode (status 36)
RPC: 25 call_decode result 0
RPC: 25 release request df16d078
RPC: rpc_release_client(dfd6b480, 2)
NFS: readdir_search_pagecache() searching for cookie 0
NFS: find_dirent_page() searching directory page 0
NFS: nfs_readdir_filler() reading cookie 0 into page 0.
RPC: 26 call_start nfs3 proc 16 (sync)
RPC: 26 call_reserve
RPC: 26 reserved req df16d078 xid 81c60019
RPC: 26 xprt_reserve returns 0
RPC: 26 call_reserveresult (status 0)
RPC: 26 call_allocate (status 0)
RPC: 26 call_encode (status 0)
RPC: 26 call_transmit (status 0)
RPC: 26 xprt_transmit(81c60019)
RPC: 26 xprt_cwnd_limited cong = 0 cwnd = 512
RPC: xprt_sendmsg(0) = 128
RPC: 26 xmit complete
RPC: udp_data_ready...
RPC: udp_data_ready client df16d000
RPC: 26 received reply
RPC: cong 256, cwnd was 512, now 512
RPC: 26 has input (760 bytes)
RPC: 26 call_status (status 760)
RPC: 26 call_decode (status 760)

[7.] Environment

This is just one machine I randomly picked, but the Problem exists on any
machine we are running 2.4.21 on! The Problem does not exist with 2.4.20.

[7.1.] Output of ver_linux:

Linux neptun 2.4.21 #1 Mon Jun 16 13:43:25 CEST 2003 i686 unknown

Gnu C 2.95.4
Gnu make 3.79.1
util-linux 2.11n
mount 2.11n
modutils 2.4.15
e2fsprogs 1.27
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 2.0.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 2.0.11

[7.2.] /proc/cpuinfo

processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 10
cpu MHz : 928.181
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1848.11

[7.3.] This machine is using a monolithic Kernel

[8.] The bug is not specific to one particular machine, but see attached
.config of the machine I picked.

Regards

Sven

-- 
"Those who do not understand Unix are condemned to reinvent it, poorly"
(Henry Spencer)

/me is giggls@ircnet, http://sven.gegg.us/ on the Web

--=_courier-28398-1056528992-0001-2 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename=config-neptun

# # Automatically generated by make menuconfig: don't edit # CONFIG_X86=y # CONFIG_SBUS is not set CONFIG_UID16=y

# # Code maturity level options # CONFIG_EXPERIMENTAL=y

# # Loadable module support # # CONFIG_MODULES is not set

# # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set CONFIG_MPENTIUMIII=y # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_X86_HAS_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_PGE=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_F00F_WORKS_OK=y # CONFIG_X86_MCE is not set # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set CONFIG_MICROCODE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_HIGHMEM is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_SMP is not set CONFIG_X86_UP_APIC=y CONFIG_X86_UP_IOAPIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y # CONFIG_X86_TSC_DISABLE is not set CONFIG_X86_TSC=y

# # General setup # CONFIG_NET=y CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_ISA=y CONFIG_PCI_NAMES=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_HOTPLUG is not set # CONFIG_PCMCIA is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set # CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_PM is not set # CONFIG_ACPI is not set # CONFIG_APM is not set

# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set

# # Parallel port support # # CONFIG_PARPORT is not set

# # Plug and Play configuration # # CONFIG_PNP is not set # CONFIG_ISAPNP is not set

# # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_CISS_SCSI_TAPE is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_BLK_STATS is not set

# # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # CONFIG_BLK_DEV_MD is not set # CONFIG_MD_LINEAR is not set # CONFIG_MD_RAID0 is not set # CONFIG_MD_RAID1 is not set # CONFIG_MD_RAID5 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_BLK_DEV_LVM is not set

# # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set # CONFIG_NETLINK_DEV is not set # CONFIG_NETFILTER is not set CONFIG_FILTER=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set CONFIG_SYN_COOKIES=y # CONFIG_IPV6 is not set # CONFIG_KHTTPD is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set

# # Appletalk devices # # CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_LLC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set

# # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set

# # Network testing # # CONFIG_NET_PKTGEN is not set

# # Telephony Support # # CONFIG_PHONE is not set # CONFIG_PHONE_IXJ is not set # CONFIG_PHONE_IXJ_PCMCIA is not set

# # ATA/IDE/MFM/RLL support # # CONFIG_IDE is not set # CONFIG_BLK_DEV_IDE_MODES is not set # CONFIG_BLK_DEV_HD is not set

# # SCSI support # CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SD_EXTRA_DEVS=40 CONFIG_CHR_DEV_ST=y # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_SR_EXTRA_DEVS=2 CONFIG_CHR_DEV_SG=y CONFIG_SCSI_DEBUG_QUEUES=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set

# # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_NCR53C7xx is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_NCR53C8XX is not set CONFIG_SCSI_SYM53C8XX=y CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 CONFIG_SCSI_NCR53C8XX_SYNC=20 # CONFIG_SCSI_NCR53C8XX_PROFILE is not set # CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set # CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set # CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set

# # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_BOOT is not set # CONFIG_FUSION_ISENSE is not set # CONFIG_FUSION_CTL is not set # CONFIG_FUSION_LAN is not set

# # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set

# # I2O device support # # CONFIG_I2O is not set # CONFIG_I2O_PCI is not set # CONFIG_I2O_BLOCK is not set # CONFIG_I2O_LAN is not set # CONFIG_I2O_SCSI is not set # CONFIG_I2O_PROC is not set

# # Network device support # CONFIG_NETDEVICES=y

# # ARCnet devices # # CONFIG_ARCNET is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_ETHERTAP is not set

# # Ethernet (10 or 100Mbit) # # CONFIG_NET_ETHERNET is not set

# # Ethernet (1000 Mbit) # CONFIG_ACENIC=y # CONFIG_ACENIC_OMIT_TIGON_I is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_MYRI_SBUS is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set

# # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set

# # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set

# # Wan interfaces # # CONFIG_WAN is not set

# # Amateur Radio support # # CONFIG_HAMRADIO is not set

# # IrDA (infrared) support # # CONFIG_IRDA is not set

# # ISDN subsystem # # CONFIG_ISDN is not set

# # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set

# # Input core support # # CONFIG_INPUT is not set # CONFIG_INPUT_KEYBDEV is not set # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_EVDEV is not set

# # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=y CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256

# # I2C support # # CONFIG_I2C is not set

# # Mice # # CONFIG_BUSMOUSE is not set # CONFIG_MOUSE is not set

# # Joysticks # # CONFIG_INPUT_GAMEPORT is not set # CONFIG_QIC02_TAPE is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_IPMI_PANIC_EVENT is not set # CONFIG_IPMI_DEVICE_INTERFACE is not set # CONFIG_IPMI_KCS is not set # CONFIG_IPMI_WATCHDOG is not set

# # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_SCx200_GPIO is not set # CONFIG_AMD_RNG is not set # CONFIG_INTEL_RNG is not set # CONFIG_AMD_PM768 is not set # CONFIG_NVRAM is not set CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set

# # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set # CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set

# # Multimedia devices # # CONFIG_VIDEO_DEV is not set

# # File systems # # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_ADFS_FS is not set # CONFIG_ADFS_FS_RW is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BEFS_DEBUG is not set # CONFIG_BFS_FS is not set CONFIG_EXT3_FS=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_FAT_FS is not set # CONFIG_MSDOS_FS is not set # CONFIG_UMSDOS_FS is not set # CONFIG_VFAT_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set CONFIG_TMPFS=y CONFIG_RAMFS=y # CONFIG_ISO9660_FS is not set # CONFIG_JOLIET is not set # CONFIG_ZISOFS is not set # CONFIG_JFS_FS is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set # CONFIG_MINIX_FS is not set # CONFIG_VXFS_FS is not set # CONFIG_NTFS_FS is not set # CONFIG_NTFS_RW is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVFS_MOUNT is not set # CONFIG_DEVFS_DEBUG is not set CONFIG_DEVPTS_FS=y # CONFIG_QNX4FS_FS is not set # CONFIG_QNX4FS_RW is not set # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UDF_FS is not set # CONFIG_UDF_RW is not set # CONFIG_UFS_FS is not set # CONFIG_UFS_FS_WRITE is not set

# # Network File Systems # # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_ROOT_NFS is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_TCP is not set CONFIG_SUNRPC=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_SMB_FS=y CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp850" # CONFIG_NCP_FS is not set # CONFIG_NCPFS_PACKET_SIGNING is not set # CONFIG_NCPFS_IOCTL_LOCKING is not set # CONFIG_NCPFS_STRONG is not set # CONFIG_NCPFS_NFS_NS is not set # CONFIG_NCPFS_OS2_NS is not set # CONFIG_NCPFS_SMALLDOS is not set # CONFIG_NCPFS_NLS is not set # CONFIG_NCPFS_EXTRAS is not set # CONFIG_ZISOFS_FS is not set

# # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_SMB_NLS=y CONFIG_NLS=y

# # Native Language Support # CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=y # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set

# # Console drivers # CONFIG_VGA_CONSOLE=y CONFIG_VIDEO_SELECT=y # CONFIG_MDA_CONSOLE is not set

# # Frame-buffer support # # CONFIG_FB is not set

# # Sound # # CONFIG_SOUND is not set

# # USB support # # CONFIG_USB is not set

# # Bluetooth support # # CONFIG_BLUEZ is not set

# # Kernel hacking # # CONFIG_DEBUG_KERNEL is not set

# # Library routines # # CONFIG_ZLIB_INFLATE is not set # CONFIG_ZLIB_DEFLATE is not set

--=_courier-28398-1056528992-0001-2--