Broadcom Gigabit + Linux 2.4.20 - Error with polling.

[war]

In dmesg, I get this on a board with onboard broadcom gbit ethernet.
The NIC is running at 100mbps.

root@l1:~_26 # uname -a
Linux l1 2.4.20 #6 Thu Jun 12 19:56:43 EDT 2003 i686 unknown unknown
GNU/Linux
root@l1:~_27 #

The description from dmesg:
eth0: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:33MHz:32-bit)
10/100/1000BaseT

00:0f.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702
Gigabit Ethernet (rev 02)
        Subsystem: Micro-Star International Co., Ltd.: Unknown device 730b
        Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 5
        Memory at dffb0000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: [40] PCI-X non-bridge device.
        Capabilities: [48] Power Management version 2
        Capabilities: [50] Vital Product Data
        Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3
Enable-

tg3: eth0: Error, poll already scheduled
tg3: eth0: Error, poll already scheduled
tg3: eth0: Error, poll already scheduled
tg3: eth0: Error, poll already scheduled
tg3: eth0: Error, poll already scheduled
tg3: eth0: Error, poll already scheduled
tg3: eth0: Error, poll already scheduled

# dmesg | grep -c tg3
372

I haven't noticed any particular network problems from this message,
however, it certainy is not normal, anyone know what the cause of this
error is?