PROBLEM: when booting from USB-HDD device kernel 2.4.21 is trying

Ilia A. Petrov (masmas@mcst.ru)
Fri, 04 Jul 2003 16:03:25 +0400


When kernel is mounting root file system it is doing it too fast so
usb-support have not ime to scan bus for mass-storage devices and
connect them.

i've tested bios usb support, so i've checked how fine different OSes
boot from USB mass-storage divices. here is my linux test:
kernel 2.4.21, with compiled-in usb support (core, HID and mass-storage
devices) and scsi generic support
USB-HDD device supports bulk-only & scsi commands
PC with BIOS that supports USB-booting

i've executed "rdev" to point kernel that root file system will be on
/dev/sda1 (cause USB-HDD uses scsi commands, it's seen as an SCSI drive)

but when i tried to boot it i've found that kernel tries to mount root
file system before is scans usb-bus for devices so it falls to panic :(

when i checked sources i've found that there is no way to delay this
like it's doing when mounting floppy RAMDISK.

here is my system:

Linux version 2.4.21 (root@ejik) (gcc version 2.95.3 20010315 (release))
#4 Thu Jun 19 19:41:08 MSD 2003

Linux ejik 2.4.21 #4 Thu Jun 19 19:41:08 MSD 2003 i686 unknown

Gnu C 2.95.3
Gnu make 3.79.1
binutils 2.11.90.0.19
util-linux 2.11f
mount 2.11b
modutils 2.4.6
e2fsprogs 1.22
reiserfsprogs 3.x.0j
pcmcia-cs 3.1.26
PPP 2.4.1
Linux C Library 2.2.3
Dynamic linker (ldd) 2.2.3
Procps 2.0.7
Net-tools 1.60
Kbd 1.06
Sh-utils 2.0
Modules Loaded nvidia vmnet vmmon 3c59x

bash-2.05# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 1
model name : Intel(R) Pentium(R) 4 CPU 1.70GHz
stepping : 2
cpu MHz : 1716.958
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 3420.97

bash-2.05# cat /proc/modules
nvidia 1540272 10 (autoclean)
vmnet 21120 9
vmmon 20000 0 (unused)
3c59x 25120 1

bash-2.05# cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
5000-500f : Intel Corp. 82801BA/BAM SMBus
c000-c07f : 3Com Corporation 3c905C-TX/TX-M [Tornado]
c000-c07f : 02:03.0
d000-d01f : Intel Corp. 82801BA/BAM USB (Hub #1)
d000-d01f : usb-uhci
d800-d81f : Intel Corp. 82801BA/BAM USB (Hub #2)
d800-d81f : usb-uhci
dc00-dcff : Intel Corp. 82801BA/BAM AC'97 Audio
dc00-dcff : Intel ICH2
e000-e03f : Intel Corp. 82801BA/BAM AC'97 Audio
e000-e03f : Intel ICH2
f000-f00f : Intel Corp. 82801BA IDE U100
f000-f007 : ide0
f008-f00f : ide1

bash-2.05# cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000d0000-000d07ff : Extension ROM
000f0000-000fffff : System ROM
00100000-0ffeffff : System RAM
00100000-002df321 : Kernel code
002df322-0039c1b7 : Kernel data
0fff0000-0fff2fff : ACPI Non-volatile Storage
0fff3000-0fffffff : ACPI Tables
e0000000-e7ffffff : PCI Bus #01
e0000000-e7ffffff : nVidia Corporation NV11 [GeForce2 MX]
e0000000-e0bfffff : vesafb
e8000000-ebffffff : Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge
ec000000-edffffff : PCI Bus #01
ec000000-ecffffff : nVidia Corporation NV11 [GeForce2 MX]
ef000000-ef00007f : 3Com Corporation 3c905C-TX/TX-M [Tornado]
fec00000-ffffffff : reserved

bash-2.05# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: IC25N020 Model: ATCS04-0 Rev: CA2O
Type: Direct-Access ANSI SCSI revision: 02

i've made a temporary solution- just copied a code that prints "insert
floppy with ramdisk and press enter" a waits for keypress:

from function "change_floppy" in init/do_mounts.c:

struct termios termios;
char c;
int fd;
printk(KERN_NOTICE "VFS: Insert %s and press ENTER\n", buf);
fd = open("/dev/console", O_RDWR, 0);
if (fd >= 0) {
sys_ioctl(fd, TCGETS, (long)&termios);
termios.c_lflag &= ~ICANON;
sys_ioctl(fd, TCSETSF, (long)&termios);
read(fd, &c, 1);
termios.c_lflag |= ICANON;
sys_ioctl(fd, TCSETSF, (long)&termios);
close(fd);
}

to function "mount_block_root" in init/do_mounts.c before
"get_fs_names(fs_names)" call.

it works fine: i wait for message that kernel found USB mass-storage
device and then press enter, but i think it isn't a best solution.
first u always need press a key to boot
second - if pc has only usb-keyboard connected and no pc\2 or com- user
couldn't mount root fs because it waits input in /dev/console

so i think it's better to add some kind of delay before mounting root,
or, imho better way, - when completing init of usb bus, first scans it
and connect all devices and only after all devices were connected
returns to main kernel code.

regards,
Ilia Petrov

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/