My ethernet module does not automatically load up, but that's probably
due to the module being named differently (xircom_tulip_cb vs tulip_cb).
In case anyone is curious:
PCI: PCI BIOS revision 2.10 entry at 0xfd99e, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/122e] at 00:07.0
PCI: Found IRQ 9 for device 00:0c.0
PCI: The same IRQ used for device 01:00.0
PCI: Found IRQ 9 for device 00:0c.1
PCI: The same IRQ used for device 00:0a.0
Limiting direct PCI/PCI transfers.
CPU0
0: 111908 XT-PIC timer
1: 5119 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 0 XT-PIC MPU-401 UART
9: 20785 XT-PIC Ricoh Co Ltd RL5c478, Ricoh Co Ltd
RL5c478 (#2), eth0, Yamaha DS-XG
12: 7795 XT-PIC PS/2 Mouse
13: 1 XT-PIC fpu
14: 10694 XT-PIC ide0
NMI: 0
ERR: 0
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
0330-0333 : MPU-401 UART
03c0-03df : vga+
03e8-03ef : serial(set)
03f6-03f6 : ide0
03f8-03ff : serial(set)
1040-105f : Intel Corporation 82371AB PIIX4 ACPI
1400-14ff : PCI CardBus #02
1800-18ff : PCI CardBus #04
1800-187f : PCI device 115d:0003
1800-187f : eth0
8000-803f : Intel Corporation 82371AB PIIX4 ACPI
fc78-fc7f : Rockwell International HCF 56k V90 FaxModem
fc8c-fc8f : Yamaha Corporation YMF-744B [DS-1S Audio Controller]
fc90-fc9f : Intel Corporation 82371AB PIIX4 IDE
fc90-fc97 : ide0
fc98-fc9f : ide1
fca0-fcbf : Intel Corporation 82371AB PIIX4 USB
fcc0-fcff : Yamaha Corporation YMF-744B [DS-1S Audio Controller]
Jordan
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/