Linux-kernel mailing list archive 2000-26,: Re: linux 2.4.0-test1-ac21: hdc: lost interrupt

# Re: linux 2.4.0-test1-ac21: hdc: lost interrupt

Andre Hedrick (andre@linux-ide.org)
Sun, 25 Jun 2000 22:47:22 -0700 (PDT)

- Messages sorted by: [ date ][ thread ][ subject ][ author ]
- Next message: Derek Martin: "Re: IMMUTABLE and APPEND-ONLY rationales"
- Previous message: Art Wagner: "Re: Linux 2.4.0-test2-ac1 Compile failure"

It is an issue of the elevator eating or killing requests.
The ATA code is correct. The elevator has been proven incorrect.
Until this is fixed, you need a patch for noop elevator that is a
combination of Jens Axboe and me, mostly Jens.

I know that my patch is not available yet.

On Sun, 25 Jun 2000, Harri Pasanen wrote:

> Hi,
>
> I'm having some trouble running the 2.4.0-test1-ac21 kernel, ide1
> devices are not behaving.
>
> On stock RedHat 6.x kernels I haven't had any problems.
>
> Messages and ver_linux output included below.
>
> Anything I should try?
>
> Thanks,
>
> Harri
>
>
>
> Jun 25 08:23:08 muskeli kernel: Linux version 2.4.0-test1-ac21
> (root@muskeli) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2
> release)) #2 Thu Jun 22 21:28:14 CEST 2000
>
> Jun 25 08:23:08 muskeli kernel: Uniform Multi-Platform E-IDE driver
> Revision: 6.31
> Jun 25 08:23:08 muskeli kernel: ide: Assuming 33MHz system bus speed for
> PIO modes; override with idebus=xx
> Jun 25 08:23:08 muskeli kernel: PIIX4: IDE controller on PCI bus 00 dev
> 39
> Jun 25 08:23:08 muskeli kernel: PIIX4: chipset revision 1
> Jun 25 08:23:08 muskeli kernel: PIIX4: not 100% native mode: will probe
> irqs later
> Jun 25 08:23:08 muskeli kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS
> settings: hda:pio, hdb:pio
> Jun 25 08:23:04 muskeli init: Entering runlevel: 5
> Jun 25 08:23:08 muskeli kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS
> settings: hdc:pio, hdd:pio
> Jun 25 08:23:08 muskeli kernel: hda: SAMSUNG SV0644A, ATA DISK drive
> Jun 25 08:23:08 muskeli kernel: hdb: HITACHI CDR-8435, ATAPI CDROM drive
> Jun 25 08:23:08 muskeli kernel: hdc: CD-RW CRX100E, ATAPI CDROM drive
> Jun 25 08:23:08 muskeli kernel: hdd: WDC WD205AA, ATA DISK drive
> Jun 25 08:23:08 muskeli kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Jun 25 08:23:08 muskeli kernel: ide1 at 0x170-0x177,0x376 on irq 15
> Jun 25 08:23:08 muskeli kernel: hda: 12504240 sectors (6402 MB) w/478KiB
> Cache, CHS=778/255/63, UDMA(33)
> Jun 25 08:23:08 muskeli kernel: hdd: 40079088 sectors (20520 MB)
> w/2048KiB Cache, CHS=39761/16/63, UDMA(33)
> Jun 25 08:23:08 muskeli kernel: hdb: ATAPI 32X CD-ROM drive, 128kB
> Cache, DMA
> Jun 25 08:23:08 muskeli kernel: Uniform CD-ROM driver Revision: 3.11
> Jun 25 08:23:08 muskeli kernel: hdc: lost interrupt
> Jun 25 08:23:08 muskeli last message repeated 2 times
> Jun 25 08:23:08 muskeli kernel: hdc: ATAPI 24X CD-ROM CD-R/RW drive,
> 1024kB Cache, DMA
> Jun 25 08:23:08 muskeli kernel: Partition check:
> Jun 25 08:23:08 muskeli kernel: hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
> Jun 25 08:23:08 muskeli kernel: hdd:hdd: lost interrupt
> Jun 25 08:23:08 muskeli kernel: hdd: lost interrupt
> Jun 25 08:23:08 muskeli kernel: hdd: lost interrupt
> Jun 25 08:23:08 muskeli kernel: hdd: timeout waiting for DMA
> Jun 25 08:23:08 muskeli kernel: ide_dmaproc: chipset supported
> ide_dma_timeout func only: 14
> Jun 25 08:23:08 muskeli kernel: hdd: irq timeout: status=0x50 {
> DriveReady SeekComplete }
> Jun 25 08:23:08 muskeli kernel: hdd: timeout waiting for DMA
> Jun 25 08:23:08 muskeli kernel: ide_dmaproc: chipset supported
> ide_dma_timeout func only: 14
> Jun 25 08:23:08 muskeli kernel: hdd: irq timeout: status=0x50 {
> DriveReady SeekComplete }
> Jun 25 08:23:08 muskeli kernel: hdd: lost interrupt
> Jun 25 08:23:08 muskeli kernel: hdd: timeout waiting for DMA
> Jun 25 08:23:08 muskeli kernel: ide_dmaproc: chipset supported
> ide_dma_timeout func only: 14
>
>
> ver_linux outputs:
>
> Linux muskeli 2.4.0-test1-ac21 #2 Thu Jun 22 21:28:14 CEST 2000 i686
> unknown
> Kernel modules found
> Gnu C egcs-2.91.66
> Binutils 2.9.1.0.23
> Linux C Library 1.1.so
> ldd: missing file arguments
> Try `ldd --help' for more information.
> ls: /usr/lib/libg++.so: No such file or directory
> Procps 2.0.2
> Mount 2.9o
> Net-tools (1999-01-31)
> Kbd [option...]
> Sh-utils 1.16
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.rutgers.edu
> Please read the FAQ at http://www.tux.org/lkml/
>

Andre Hedrick
The Linux ATA/IDE guy

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

- Next message: Derek Martin: "Re: IMMUTABLE and APPEND-ONLY rationales"
- Previous message: Art Wagner: "Re: Linux 2.4.0-test2-ac1 Compile failure"