Some problems with the eepro100 driver and ipaq

[Drizzt]

De compaq ipaq have a internal eepro 100 card.

 
01:01.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev
08)        Subsystem: Intel Corporation 82559 Fast Ethernet LOM with Basic
Alert on LAN*
        Flags: bus master, medium devsel, latency 66, IRQ 11
        Memory at 40100000 (32-bit, non-prefetchable)
        I/O ports at 1000
        Memory at 40000000 (32-bit, non-prefetchable)
        Capabilities: <available only to root>
                                                                                I
have using the eepreo100 driver from de stock 2.2.16 kernel

It detects ok the card :

eepro100.c: $Revision: 1.20.2.10 $ 2000/05/31 Modified by Andrey V. Savochkin
<s
[e-mail]> and others
eth0: OEM i82557/i82558 10/100 Ethernet, 00:D0:B7:86:EA:70, IRQ 11.
  Receiver lock-up bug exists -- enabling work-around.
  Board assembly 000000-000, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/driv
ers/eepro100.html

Bute when I try to asing a IP via DHCP:
eth0: card reports no RX buffers.
eth0: card reports no resources.
eth0: card reports no RX buffers.
eth0: card reports no resources.
eth0: card reports no RX buffers.
eth0: card reports no resources.
eth0: card reports no RX buffers.
eth0: card reports no resources.
eth0: 0 multicast blocks dropped.
eth0: card reports no RX buffers.
eth0: card reports no resources.
eth0: card reports no RX buffers.
eth0: card reports no resources.
eth0: card reports no RX buffers.                    

iWhen I try again from the command line, the card works okey :?.

I don't know exatly what the problems, but perhaps these info
could be useful to somebody. The card works fine, but I havn't done <F11>any
speed test etc,.

These kernel is a 2.216 stock kernek plus USB patches ( I can't use mouse
withou them), agpgart and the patcgh ffor the i810 sound codec from 2.2.17pre

Saludos
Drizzt
--