Re: ncr53c400 SCSI card (HP scanner)

[Andre Hedrick]

Alan are there escape error messages in the host.h that address
non-storage SCSI calls?  I have heard of this in the past but never gave
it a second thought.  I do not see anything that address the issue of
non-storage commands, but then again I am not claiming to know scsi
either.

Cheers,

On Tue, 8 Aug 2000, Alan Cox wrote:

> > insmod g_NCR5380 ncr_addr=0x280 ncr_irq=255 ncr_53c400=1
> > gives the SCSI bus busy messages, and then hangs the machine.
> > 
> > insmod g_NCR5380 ncr_addr=0x280 ncr_irq=255 ncr53c400a=1
> > gives Device of resource busy
> > 
> > According to Window the thing is at 0x280, irq 9.
> > Any hints on how to debug this beast ?
> 
> Try pnpdump - it might be you have the extra expensive (like 2cents/chip)
> ISA PnP version
> 
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [e-mail]
> Please read the FAQ at http://www.tux.org/lkml/
> 

Andre Hedrick
The Linux ATA/IDE guy