Linux 2.4.0-test6 gave me this:
Yenta IRQ list 06b8, PCI irq11
Socket status: 30000006
Yenta IRQ list 06b8, PCI irq11
Socket status: 30000020
cs: cb_alloc(bus 5): vendor 0x1011, device 0x0019
PCI: Error while updating region 05:00.0/2 (00001801 != 00000000)
PCI: Enabling device 05:00.0 (0000 -> 0003)
Linux Tulip driver version 0.9.8 (July 13, 2000)
PCI: Setting latency timer of device 05:00.0 to 64
eth0: Digital DS21143 Tulip rev 65 at 0x1800, EEPROM not present, 00:4C:69:6E:75:79, IRQ 11.
eth0: Missing EEPROM, this interface may not work correctly!
...and eth0 did not work. When it works (2.4.0-test5-pre2), it looks like this:
cs: cb_alloc(bus 5): vendor 0x1011, device 0x0019
PCI: Enabling device 05:00.0 (0000 -> 0003)
Linux Tulip driver version 0.9.8 (July 13, 2000)
PCI: Setting latency timer of device 05:00.0 to 64
eth0: Digital DS21143 Tulip rev 65 at 0x1400, 00:80:C8:BC:22:D0, IRQ 11.
eth0: EEPROM default media type Autosense.
eth0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
eth0: MII transceiver #0 config 3000 status 7809 advertising 01e1.
Mail me if more info is needed.
/Tobias
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/