I am running a dual PIII 933 VIA based motherboard (Gigabyte 6VXDC7).
I have two Seagate Cheetah HDs, and two SCSI cdroms. There are no IDE
devices anywhere in the system, and no support is compiled in the kernel or
as a module for IDE.
Kernel 2.4.7 works perfectly. I cannot get 2.4.10 to work with the new aha
driver compiled into the kernel. Below is what I was able to capture of the
output
Disconnected List inconsistency. SCB index == 255, yet numscbs=4.scsi0
Dumping card state while ide, at SEQADDR 0x1a5
ACCNUM=0x0
SINDEX=0x0
DINDEX=0x0
ARG_2=0x7f
HCNT=0x0
SCSI SEQ=0x12 SBLKCTL=0xa
DFNCTRL=0x0 DFSTATUS=0x89
LAST PHASE=0x1 SCSISIGI=0x0 SXFRCTL0=0x88
SSTAT0=0x0
SSTAT1=0x0
STACK=0x0, 0x0, 0x0, 0x0
SCB_COUNT=4
KERNEL NEXTQSCB=3
CARD NEXTQSCB=3
QINFIFO Entries: Waiting Queue Entries: Disconnected Queue Entries:
0:255...31:255
QOUTFIFO entries:
Sequencer Free SCB List:
0...31
Pending List:
Kernel Free SCB List: 2 1 0
Kernel Panic : For Safety
I am currently running 2.4.10 with the old Doug Ledford driver, and it works
perfectly.
P.S. Could you please CC me any help?
Thank you.
--David Koretzky david@spanware.com - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/