Attached is dmesg with 2.5.1-pre7 + devfs-patch-v203.
The first and second manual loading of the ide-cd module give something
different.
#modprobe ide-cd ; rmmod ide-cd ; modprobe ide-cd
hdc: ATAPI CD-ROM drive, 0kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Why ?
Pierre
-- ------------------------------------------------ Pierre Rousselet <pierre.rousselet@wanadoo.fr> ------------------------------------------------ --------------AC8171F0F1C62D980C8A2202 Content-Type: text/plain; charset=iso-8859-1; name="MESS" Content-Transfer-Encoding: 8bit Content-Disposition: inline; filename="MESS"Linux version 2.5.1-pre7+devfs-v203 (root@milou) (gcc version 2.95.3 20010315 (release)) #1 sam déc 8 16:20:55 CET 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000010000000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 65536 zone(0): 4096 pages. zone(1): 61440 pages. zone(2): 0 pages. Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Kernel command line: vga=4 root=/dev/discs/disc0/part2 ro mem=262144K Initializing CPU#0 Detected 670.105 MHz processor. Console: colour VGA+ 80x30 Calibrating delay loop... 1336.93 BogoMIPS Memory: 256344k/262144k available (782k kernel code, 5412k reserved, 242k data, 72k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000 CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU: Intel Pentium III (Coppermine) stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000040 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 670.0819 MHz. ..... host bus clock speed is 103.0894 MHz. cpu: 0, clocks: 1030894, slice: 515447 CPU0<T0:1030880,T1:515424,D:9,S:515447,C:1030894> mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb380, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 Limiting direct PCI/PCI transfers. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.15) Starting kswapd BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec: init pool 0, 1 entries, 12 bytes biovec: init pool 1, 4 entries, 48 bytes biovec: init pool 2, 16 entries, 192 bytes biovec: init pool 3, 64 entries, 768 bytes biovec: init pool 4, 128 entries, 1536 bytes biovec: init pool 5, 256 entries, 3072 bytes devfs: v1.5 (20011204) Richard Gooch (rgooch@atnf.csiro.au) devfs: devfs_debug: 0x0 devfs: boot_options: 0x1 block: 256 slots per queue, batch=32 Uniform Multi-Platform E-IDE driver Revision: 6.32 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI slot 00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio HPT366: onboard version of chipset, pin1=1 pin2=2 HPT366: IDE controller on PCI slot 00:13.0 PCI: Found IRQ 11 for device 00:13.0 PCI: Sharing IRQ 11 with 00:13.1 HPT366: chipset revision 1 HPT366: not 100% native mode: will probe irqs later ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:pio HPT366: IDE controller on PCI slot 00:13.1 PCI: Found IRQ 11 for device 00:13.1 PCI: Sharing IRQ 11 with 00:13.0 HPT366: chipset revision 1 HPT366: not 100% native mode: will probe irqs later ide3: BM-DMA at 0xe000-0xe007, BIOS settings: hdg:pio, hdh:pio hdc: CRD-8240B, ATAPI CD/DVD-ROM drive hde: ST310212A, ATA DISK drive hdg: SAMSUNG SV0322A, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0xcc00-0xcc07,0xd002 on irq 11 ide3 at 0xd800-0xd807,0xdc02 on irq 11 blk: queue c023bc84, I/O limit 4095Mb (mask 0xffffffff) hde: 20005650 sectors (10243 MB) w/512KiB Cache, CHS=19846/16/63, UDMA(66) blk: queue c023c004, I/O limit 4095Mb (mask 0xffffffff) hdg: 6250608 sectors (3200 MB) w/478KiB Cache, CHS=11024/9/63, UDMA(33) Partition check: /dev/ide/host2/bus0/target0/lun0: [PTBL] [1245/255/63] p1 p2 p3 p4 /dev/ide/host3/bus0/target0/lun0: p1 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 204M agpgart: Detected Intel 440BX chipset agpgart: AGP aperture is 256M @ 0xc0000000 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 72k freed Adding Swap: 80316k swap-space (priority -1) Real Time Clock Driver v1.10e es1370: version v0.37 time 16:25:02 Dec 8 2001 PCI: Found IRQ 9 for device 00:09.0 PCI: Sharing IRQ 9 with 00:07.2 es1370: found adapter at io 0xc400 irq 9 es1370: features: joystick off, line out, mic impedance 0 Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html PCI: Found IRQ 10 for device 00:0d.0 eth0: RealTek RTL-8029 found at 0xc800, IRQ 10, 00:40:05:E4:DB:3F. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] parport0: cpp_daisy: aa5500ff(98) parport0: assign_addrs: aa5500ff(98) parport0: Printer, HEWLETT-PACKARD DESKJET 930C lp0: using parport0 (interrupt-driven). lp0: compatibility mode hdc: ATAPI CD-ROM drive, 0kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
--------------AC8171F0F1C62D980C8A2202--
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/