Re: ATA err with 2.4.20-ac1

Andre Hedrick (andre@linux-ide.org)
Mon, 26 Aug 2002 11:08:51 -0700 (PDT)


On Mon, 26 Aug 2002, Grega Fajdiga wrote:

> Good day,
>
> > If people report IDE stuff I need to know the context, dmesg, controller
> > and drives.
>
> /dev/hda/: Maxtor 91021U2
> dev/hdb: ST31722A
>
> hda: Maxtor 91021U2, ATA DISK drive
> hdb: ST31722A, ATA DISK drive
> hdc: FX240S, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: host protected area => 1
> hda: 20010816 sectors (10246 MB) w/512KiB Cache, CHS=1245/255/63, UDMA(33)
> hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
> hdb: task_no_data_intr: error=0x04 { DriveStatusError }

Place bets on geometry call or recal!
No sweat guys.

> hdb: 3329424 sectors (1705 MB) w/128KiB Cache, CHS=825/64/63, UDMA(33)
> hdc: ATAPI 24X CD-ROM drive, 256kB Cache, DMA
> Uniform CD-ROM driver Revision: 3.12
> Partition check:
> hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
> hdb: hdb1

It is an old drive and did not like the command.

Andre Hedrick
LAD Storage Consulting Group

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/